openrcforums

I get it, but this would be a option for the end user and his/hers choice. One could set it up to shut down after 1,2,3,4, etc. hours after no stick/button movement. typically one does a pre-flight check that would reset the timer and when flying a movement would be at least once within a hour.

Hi all,
It may have been brought up before but I did not find anything about it. Is it possible to impliment a low voltage automatic shut off of the Turnigy 9X through the ER9X firmware? I am running lipos and this would be usefull. Say around 9V for the 3cell lipo.
TIA

Thanks for all the help. Trying to give back and help others out. Went ahead with the RadioShack 2N3904 NPN Small Signal Transistor route. All parts can be had for about 4USD [Not including the back light] and the best part, found locally. I cut the PCB off the Hobby King back light which frees up s...

I received a answer from the man himself over at rcgroups "Simple... don't use it If you are just using a HK LED backlight as its designed - that is, unmodified and just turns on/off when your radio is on/off - then there's no need to do anything at all. Simply don't use the backlight feature i...

Anyone Know how to disable the EL driver on the SP board? I am going the LED route and do not need the current use from the driver.
TIA

A 2N3904 is very a common NPN and should be in stock http://m.radioshack.com/radioshack/product/detail.do?itemId=2062609&categoryId=&path= Where do you live? There may be a local source for the 2n7000 FET or the BC170. ShowMaster Sent from my iPod touch using Tapatalk I can get this part, b...

Hi all,
Is there any proven off the shelf transistors from RadioShack that will work for this mod?
TIA

That explains it. I was a little confused about the - as I have seen in other TX systems they put in the - in the DR/EXPO.
Thanks

Hi all, ER9x R768 Channel order AETR I have a F22 Raptor with a Taileron mix needed. One servo in channel 1 and the other channel 2 on the Rx. I used the template for elevon/delta and switch/reversed the AIL/ELE because when I moved the aileron stick the servos moved in unison and when I moved the e...

Hi all For thr life of me I can not get the latest downloaded revision of er9X or Open9x to work in the sim of C9X r1163. In the preferences it will show the latest downloaded release, but in the sim it shows a older one. I want to check out the new FW revisions of er9x and open9x in the sim but it ...

Hobby King 2.4Ghz Receiver 6Ch Version 2





I have the module that comes with the Turnigy 9X 9Ch Transmitter

I believe they are Flysky/HK

As a note, also does it in Open9x 1103

I use it on the sticks and this is why. I have the BL shut off after 15 seconds and on with stick movement. Why flying my sticks are always moving at least every 15 seconds which keeps the light on. I look down and the light is on, no pushing anything, which is good for me. When I land the light goe...

How in the wide world of sports, does one set the backight to come on with stick movement like in ER9x?
TIA

Checked it again and I read it wrong. $3.99 with a two week ship time. My OP still stands.

Yes, USA, I just updated my prfile. Last I checked it was $8USD for a $5 part.. BTW do you two ever sleep/eat/work?LOL..

Running the SP board with the El BL. As great as it is I do not like the electric noise it creates when the EL is on and no fix in sight. I want to go with the HK backlight but the shipping is a deal breaker for me. Anyone have a spare willing to let go to a good home? Also I cannot locally find the...

Work perfectly. Never thought to scroll all the way the limit menu since I and only running 4 channels. maybesomeone can add this to the manual.
Thanks Again.

Hi all, This is a seemly easy question that I got stuck on stupid with. Running R766, I set my elevator,alierons, and rudder trims in flight on my slow stick with the trim tabs to fly level and straight. Now that the plane is on the ground is there a way I can zero the trims out on the Tx and keep t...

Hi all, ER9X 762 When I set a mix, elevator up/down to slow speed it is very jerky on the servo. Setting doesn't seem to be a factor 1-5, same jerky movement on the elevator. Is this just how it is? The servos I have are quite possibly the cheapest ones known to man. Analog Towerpro 9g SG90 Sub Micr...

I prefer C9X over ePee because it is a better layout for me and I think it is a great sim created by great minds. That said, I am struggling with the Expo/DR screen. In C9X vs eePe the expo/dr screens are quite different. I can set high/med/low DR with different switches with different rates and dif...

I agree, it would be very handy.

Also does not work on
C9X Version 0.76 r1008 May 12, 2012- Windows 7
ER9x R762

I can deal with it as it is not a major issue, just a nuisance that I found out after buying the board. I would still by the board as I think it is a great idea, but if there is a fix I will apply it. Interesting to know that you can use the board for the HK BL mod. Any info on how to perform this? ...

What I have found is with the EL unpluged and the SP board in the jitter stops with the light switched on or off. With the board out same results. Seems that the draw from the EL light causes the issue.

Yes, plus the jitter is also on the screen in the pic on my first post. Quite annoying but harmless unless you actually want to see the values with the light on.

Running the SP board and the EL backlight on ER9x 760. While a excellent product I notice a annoying fluctuation of digits on the trim increment info screen when the BL is on. I believe this EL BL uses quite a bit more current than the HK LED BL and digits "dance" with the light on. Anyone...

Thanks for all your work. You guys are making this very easy for a newbie with limited funds to use a budget radio with high end advanced options. Your work does not go un-noticed.

ER9X with no options selected, just the basic version.

C9X V0.71 R948 5/4/2012
ER9X R760 V1.5648-erez
Anyone else have this issue.
Model names with 10 characters wraps around the screen and the battery voltage first digit hits the trim indicator on the left side.