openrcforums

Hi I am having a problem with the high resolution altimeter connected to a r8x receiver getting zero altitude reading all other telemetry readings seem fine the led on the altimeter flashes as you would expect I have one of these connected to a dr8 rx and that works fine Do i have to change any of t...

Hi davx Thanks for that works fine :D I have modified it a little to my personal choice Logic switch line 1 now reads "sticky" switch SG(FORWARD) Switch SF (BACK),This means I can move switch SF any time during the first 30 seconds Thanks again for you very knowledgeable help Now if I can just find ...

Hi Davx I have to admit that I changed the switch position in your eepe.i use SG forward or down to start the motor and the 30sec timer SG back or up turn off the motor and resets the timer to 0 The esoaring rules only allow one motor run of upto 30 seconds within a 10 min flight. So if I set the sw...

Hi Davx
Thanks for that ,unfortunately it does not do the job.The 30 second timer runs fine from the SG switch but the 10 minuet timer does not start,would it be better if another physical switch was involved?
Many Thanks

Hi I am new to the Tranis and find it very good but like a lot of other users I am having trouble with Logic switch ,or rather understanding it I fly in Esoaring comps (very similar to ALES) and it would be very helpful for me to be able to run a 30 second countdown timer AND a 10 minuet timer from ...

Hi All I am new to the Taranis and found myself with the" Dead" problem reading this thread or at least the section prior to the silly bits was most helpfull. Prior.Prior to finding this thread i tried various search phrases and only the word dead got me here and the advice i found here has cured my...

Hi All I am very new to the Taranis and am in the process of setting up a RES electric powered Esoarer and would appreciate some help (in layman's language please) I am using switch SG for the motor chn 1 for Ail.chn 2 for Ele ,Brakes on chnl 3 plus 7 Rudder on chn4 The current problem I am wrestlin...