Search found 23 matches

by handsomejackuk
Thu Dec 15, 2016 10:55 pm
Forum: Turnigy 9XR radio
Topic: can i install 2.2 opentx on a 9xr ?
Replies: 1
Views: 7818

can i install 2.2 opentx on a 9xr ?

As topic says is this possible...
by handsomejackuk
Thu Dec 15, 2016 8:26 pm
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

awesome tried it on simulator and it seems to work thanks...

great bit of advice there... learnt loads... about switches...
by handsomejackuk
Thu Dec 15, 2016 8:18 pm
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

i have got version 2.1.9 uploaded on my 9xr now and it seems to be ok, i have loaded my previous models on there and have tested one seems to be ok... now at the position of testing the parameters in the simulator on open tx before uploading the model... first problem i have is this... theres no a=x...
by handsomejackuk
Thu Dec 15, 2016 6:39 pm
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

looks like i currently have this firmware which is a bit old... i have tried to upload a later version but with no success yet...

Image
by handsomejackuk
Thu Dec 15, 2016 4:12 pm
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

i think i may need to delve in to the pc software again to do this.... going to try it in a minute thanks for the help...
by handsomejackuk
Thu Dec 15, 2016 1:54 am
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

got [adjustGV] highlighted on special functions with the trn switch, and the tick highlighted too.... i also use the trn switch in special functions to reset my tmr1 for an overall time of my flight but thats not so important so know a little bit of whats going on but not too sure of the gv setting ...
by handsomejackuk
Thu Dec 15, 2016 1:38 am
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

Whoah... thanks at least i know some one is on to this.... it would be so uselful... as the trainer switch on a 9xr is spring loaded maybe on other transmitters, i thought it may be a useful thing to do.. as i sometimes sequence through a few flight modes, and i get feedback through my exgui telemet...
by handsomejackuk
Wed Dec 14, 2016 9:49 am
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

Re: trainer switch sequencing values

I sure this can be done and someone must have an idea how to do it please help...?

so to re iterate trainer switch flick it and the value changes fro 1000 to 1500 to 2000, or whatever value i setup when i loose go of the switch the value stays at 1000, 1500, 2000...

this would be so useful...
by handsomejackuk
Tue Dec 13, 2016 1:05 pm
Forum: openTx
Topic: trainer switch sequencing values
Replies: 19
Views: 10942

trainer switch sequencing values

Can anyone tell me if it possible to set the trainer switch on my turnigy 9xr to sequence values ? basically i want to be able to flick the trainer switch, and alter the values of a channel to 1000, 1500, 2000, or whatever values are set, and then back to 1000, and so on.. is there a function for th...
by handsomejackuk
Fri Jan 30, 2015 12:57 am
Forum: General RC Electronic Projects and Discussion
Topic: Convert Receiver channels to PPM with arduino
Replies: 58
Views: 40279

Re: Convert Receiver channels to PPM with arduino

yeah it seems to work ok i was quite surprised actually i built this in one night.. there is some seting in the arduino sketch to alter the failsafe settings i will try tomorrow

thanks for the quick reply..
by handsomejackuk
Thu Jan 29, 2015 11:57 pm
Forum: General RC Electronic Projects and Discussion
Topic: Convert Receiver channels to PPM with arduino
Replies: 58
Views: 40279

Re: Convert Receiver channels to PPM with arduino

João were you involved with this much specifically the arduino firmware..? as i just curious to know if the failsafe works, and if the throttle channel default failsafe setting can be altered.. i got a bit mixed up when setting my channels and my pitch seems to be my faisafe channel at 900 'us or if...
by handsomejackuk
Thu Jan 29, 2015 11:29 pm
Forum: General RC Electronic Projects and Discussion
Topic: Convert Receiver channels to PPM with arduino
Replies: 58
Views: 40279

Re: Convert Receiver channels to PPM with arduino

works a treat using this to convert an 8 channel flysky receiver to input ppm to a d.i.y. arduino flight controller so i have full 8 channels ppm to it.. there was not enough data line inputs on my pro mini arduino to give me 8 pwm channels... so basically i have converted a pwm receiver to ppm... N...
by handsomejackuk
Thu Jan 29, 2015 11:10 pm
Forum: General RC Electronic Projects and Discussion
Topic: Convert Receiver channels to PPM with arduino
Replies: 58
Views: 40279

Re: Convert Receiver channels to PPM with arduino

got this working a treat thanks to all involved.. especially Buzz.... whoever he is.. thanks
by handsomejackuk
Mon Jan 05, 2015 11:40 am
Forum: ersky9xr
Topic: Telemetry Protocols
Replies: 62
Views: 30368

Re: Telemetry Protocols

If you want to send the incoming telemetry data of djt/dht to bluetooth module you have to do a part of the telemetry mod: mod the djt/dht to output ttl level (not recommended) or convert the rs232 level signals of djt/dht to ttl via a converter in a way like this The connections that normally go t...
by handsomejackuk
Mon Jan 05, 2015 11:08 am
Forum: ersky9xr
Topic: Telemetry Protocols
Replies: 62
Views: 30368

Re: Telemetry Protocols

ok thanks i got a bit further now..... will continue to research this avenue
by handsomejackuk
Sun Jan 04, 2015 6:10 pm
Forum: ersky9xr
Topic: Telemetry Protocols
Replies: 62
Views: 30368

Re: Telemetry Protocols

ok thanks Mike i just thought it may be a popular mod with the ezgui app giving so much infomration, and android phones so popular. i have bluetooth working on my quad great with the ez-gui app but the range is limited to only 10m i have a search about to see if anyone else knows or have done a simi...
by handsomejackuk
Sun Jan 04, 2015 2:23 pm
Forum: ersky9xr
Topic: Telemetry Protocols
Replies: 62
Views: 30368

Re: Telemetry Protocols

can anyone confirm if a frsky djt module can be connected directly to a bluetooth module hb01 or similar product to send telemetry data to an android device running multiwii ez-gui or frsky app.... i have a turnigy 9xr but dont really want to do the telemetry mod unless i get a spare main board... i...
by handsomejackuk
Sun Jan 04, 2015 1:59 pm
Forum: FRSky Telemetry Mods
Topic: FrSky telemetry mod without RS232 level converter
Replies: 128
Views: 127913

Re: FrSky telemetry mod without RS232 level converter

can anyone confirm will any of these mods allow a bluetooth adaptor to be connected to the tx rx and send telemetry data to android via multiwii ex-gui ?
by handsomejackuk
Wed Dec 31, 2014 2:23 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 201110

Re: Search for Replacement 9x Potentiometers!

i just thought that if the pots were changed that maybe this could be solved, i did try them with the back off.. and they did seem to perform better, but i havent got a soldering iron at the moment and need to get another one... i didnt think to check the values and angles on the pots when i had it ...
by handsomejackuk
Wed Dec 31, 2014 12:27 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 201110

Re: Search for Replacement 9x Potentiometers!

i have done what that man says above but the issue is surely with the value of the throttle pot being different to the other 3 so by doing that mode, you effectively are moving the throttle pot to the elevator / pitch channel. i think this is why i have inconsistent values on my elevator, and my thr...
by handsomejackuk
Wed Dec 31, 2014 1:07 am
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 201110

Re: Search for Replacement 9x Potentiometers!

just browsing through this and bought a 9xr mode 1 as mode 2 was not available in u.k at the time of ordering. having completed mode1 to mode2 conversion by just altering the gimbal hardware i.e. removing the spring, and friction device and swapping, i do seem to have an issue with the pitch / eleva...
by handsomejackuk
Mon Nov 03, 2014 8:12 pm
Forum: Hardware
Topic: My 9XR bricked...Can anyone help with it?
Replies: 9
Views: 6103

Re: My 9XR bricked...Can anyone help with it?

i want to flash my 9xr but am a bit scared now after reading this.. will i be ok ?
by handsomejackuk
Sun Oct 26, 2014 10:25 pm
Forum: er9x
Topic: "Dead Space" on the sticks?!
Replies: 28
Views: 27585

Re: "Dead Space" on the sticks?!

bump this post for reference

Go to advanced search