Search found 38 matches

by idar66
Fri Jan 01, 2016 7:39 am
Forum: ersky9xr
Topic: Program a rotary potentiometer (P1) as switch
Replies: 8
Views: 5764

Re: Program a rotary potentiometer (P1) as switch

Test versions are found here: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676 . Usually they are fully working although the new feature(s) being tested may have some slight problems. Mike. hi mike if i upgrade to the lastest test version will i still have the same bluetooth features etc ...
by idar66
Tue Dec 22, 2015 3:47 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

thanks for the info mike on firmware very good idea having menus locked out when theres no reason most need to go into them,this firmware is so flexible and so much fun once you get the basic understanding of how it works, cheers idar
by idar66
Mon Dec 21, 2015 9:20 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

No problem, happy to help.. Please let us know if it worked.. ;) João hi there jhsa i got it up and running finally, i had soldered the earase wire on the pin next to the one i should have soldered too, i got confused and did not realise on photo it was a bottom view so i had it back to front, luck...
by idar66
Mon Dec 21, 2015 4:11 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi mike by the way when i push button after start and it works i have debug of 1, also mike these a few things coming up with disabled is this normal for this firmware, thanks idar
by idar66
Mon Dec 21, 2015 4:07 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi mike yes debug is 0000, ive had progress i disconected the wire that went to erase point, if i turn on and push little button it works, im pretty sure ive got the place wrong where i soldered the erase wire too, i thought i had that part right as i lifted board and soldered to the pin underneath ...
by idar66
Sun Dec 20, 2015 10:36 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi just wanted to add i did not cut any traces not on purpose anyway, im just about to take it apart again doh!! should have tested it before screwing back together, oh well i love learning new things
by idar66
Sun Dec 20, 2015 10:28 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi ive just given it a try and i cant get it to work,on buletooth menu it wont let me change master slave just stays on unknown , the weird thing is i can pair with it with my ph, my ph sees it as hc05 so i must have a connection not right somewhere ,im not sure if this is related but i have a coupl...
by idar66
Sun Dec 20, 2015 5:36 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

thanks jhsa ive taken the little wire off the erase pin, ive taken pin out out removed pin altogether ive now soldered erase wire to first part of little button, so now theres no connection between pin hole and wire on little button which makes a circut to pin 34, also just updated the firmware i no...
by idar66
Sun Dec 20, 2015 4:33 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

heres the other side, sorry i thought it had loaded both, on the back of my modual i have a trace thar runs from en pin to pin 34
by idar66
Sun Dec 20, 2015 4:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

yes ive done that and it does complete circut once i put wire on, so is that all i had to do dont i have to cut trace underneath?
by idar66
Sun Dec 20, 2015 4:23 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi there hope these are better, thanks heaps for your time, idar
by idar66
Sun Dec 20, 2015 4:07 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi jhsa i think i may have it, do i cut the en track, and then run a wire from back of small button to pin 34 that way it only gets power from the radio on reset, i think im right it makes sence i should have seen it earlier, plz reply asap as i want to get job finished i have radio apart waiting to...
by idar66
Sun Dec 20, 2015 3:35 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi heres a couple of photos i hope you can tell me or show me where to cut trace thanks idar
by idar66
Sun Dec 20, 2015 3:28 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi in photo do you cut where the green is or where the red is, cause if its the red i dont have a track going from there to an, im trying to upload a photo so i can show you
by idar66
Sun Dec 20, 2015 3:14 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi i looked at where you say to cut but my modual does not have a line going from vcc to en my bluetooth has same writing as one in jaoao post but my track thingees look abit different do i cut a little line through the vcc one, ill post a photo if i can, thanks for your help its been great, i ended...
by idar66
Sun Dec 20, 2015 3:04 pm
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

i am talking about a 9xr pro your 9xtreme site had the same bluetooth modual, so i am in the right thread i hope
by idar66
Sun Dec 20, 2015 11:06 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi mike thanks for help heres a pic of my modual http://openrcforums.com/forum/download/file.php?id=11344&mode=view http://openrcforums.com/forum/download/file.php?id=11345&t=1 plz can you take a look and tell me what i have to do to get running, ie do i copy what is pics above ie cutting tr...
by idar66
Sun Dec 20, 2015 10:18 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

hi mike where is pin 24? theres a pin 34 in other diagrame, i connected to erase underneath board where power header is first pin closest to where sd card is and ive got it connected to rn on hc05, ive got no debug i cant even tell if its doing anything, the amount of different info is pulling my ha...
by idar66
Sun Dec 20, 2015 7:09 am
Forum: Turnigy 9XR PRO radio
Topic: Adding Bluetooth module
Replies: 297
Views: 210449

Re: Adding Bluetooth module

I've managed to get a HC-05 module installed in a 'PRO, and I have modified the code to make it start to work. The connections are from the COM3 (Bluetooth) connector, 0V to 0V, 3.3V to 5.0V (erring on the side of caution), Tx to Rx and Rx to Tx. In addition, I have wired the ERASE signal to the KE...
by idar66
Tue Nov 24, 2015 7:39 am
Forum: General RC Electronic Projects and Discussion
Topic: quanum telemetry problem
Replies: 0
Views: 2723

quanum telemetry problem

hi i had a quanum telemetry system with add on temp and pack voltage, i thought id have ago at fitting into my delta ray for my son to use, i had it all set up on table to set up etc it was going sweet, i unpluged and tried to fit in plane, i installed power to notice there was no light on reciever ...
by idar66
Mon Nov 23, 2015 1:57 am
Forum: Where to buy / Spares / Modules? Selling up?
Topic: quanum telemetry setup, never used,
Replies: 1
Views: 6565

quanum telemetry setup, never used,

hi ive got the quanum telemetry set for sale has screen sensor and voltage sensor solderd with plugs ready to go, also comes with different arieal so you can put into tight spaces,pm me for pics the reason im selling is i bought all this gear and then ended up buying taranis and 9xr pro so this ha s...
by idar66
Mon Nov 23, 2015 1:33 am
Forum: Where to buy / Spares / Modules? Selling up?
Topic: dx4e never used
Replies: 0
Views: 4594

dx4e never used

hi ive got a nice little dx4 gathering dust i got it with my delta ray but never used as i had dx6, i also have a blade lp6d as well that i want to sell make me a offer, pm me for photos etc cheers idar :)
by idar66
Mon Nov 23, 2015 1:28 am
Forum: Where to buy / Spares / Modules? Selling up?
Topic: turnigy 9xr still new in box with extras
Replies: 0
Views: 4611

turnigy 9xr still new in box with extras

hi i have a near brand new 9xr still in box with white faceplate or normal, comes with cable for computer to switch firmware, id be happy with $50 nzd plus shipping, ,im also listing some other things , time for clean out, :D ps ill provide photos etc just pm me,
by idar66
Fri Nov 20, 2015 3:25 am
Forum: openTx model setup
Topic: NOOB need help setting up Hobbyzone Sport Cub S
Replies: 62
Views: 84857

Re: NOOB need help setting up Hobbyzone Sport Cub S

hi mate im just setting my 2oosrx up like your dx5 emulation file on my new 9xr pro, i think ive got it right in open tx and im just getting finished with 9xr pro running sky9xr fimware lastest, when setting up 3 way switch for modes it took me awhile to get it to work i had to use source half for c...
by idar66
Tue Nov 17, 2015 9:38 am
Forum: ersky9xr
Topic: x8r reciever and pxx model match
Replies: 1
Views: 2731

x8r reciever and pxx model match

hi ive got both the taranis and 9xr pro ,im wanting to bind x8r with xjt modual in pxx mode with 9xr pro ive set model match to 1 in 9xr menu if i bind it to 9xr does this mean the reciever will always be number one? and if i wanted to rebind it too the taranis does it have to be 1 in the model matc...
by idar66
Tue Nov 17, 2015 8:46 am
Forum: openTx
Topic: SPort device updating
Replies: 98
Views: 64721

Re: SPort device updating

please disregard my last two posts, must be tired ill go with that excuse! ive got too many radios and it gets confusing, i was after mantenence mode on open tx which mike has on uploads in the sport flashing in firmwares section, i ended up flashing mikes 2016 version of it and it worked perfectly!...
by idar66
Tue Nov 17, 2015 8:19 am
Forum: openTx
Topic: SPort device updating
Replies: 98
Views: 64721

Re: SPort device updating

hi im a idiot im meaning esky9xr 215 was my first mantenece mode when i saw version 217 i upgraded and then realised id lost mantenence mode so i found mikes uploads for mantence mode eproms, theres a version 216 with mantence mode and a folder with saying 217 but only has cpp files, can i just inst...
by idar66
Tue Nov 17, 2015 2:58 am
Forum: openTx
Topic: SPort device updating
Replies: 98
Views: 64721

Re: SPort device updating

hi sorry to be a pain but last reply did not give me the info im needing, i had mantenence mode in my 2015 and loved it, i saw 2017 source file folder , so i upgraded through companion to 2017 then went to install 2017 mantenence mode only to find no eprom, i read on and i see 2016 mantenence is the...
by idar66
Mon Nov 16, 2015 11:28 am
Forum: openTx
Topic: SPort device updating
Replies: 98
Views: 64721

Re: SPort device updating

hi mike where is the 2017 with matenence mode, as i could only find 2016, ive got 2017 flashed on my tx at the moment do i need to go back to 2016 , thanks heaps for your help and all the work you guys put into this, idar :D
by idar66
Sun Nov 15, 2015 4:24 am
Forum: ersky9xr
Topic: Eepe files
Replies: 6
Views: 5753

Re: Eepe files

hi there as mike said update your firmware to lastest, my expierence with the wl toys wl-t6 is that it is a dog to set up, i ended up throwing it away and get the cheap flysky modual which is under $20 its heaps easier to setup, also tx should be set to ppm for wl-6, hope this may help you, :P

Go to advanced search