openrcforums

CptanPanic wrote: ↑

Thu Oct 14, 2021 10:07 am

So I found the newer version of script in official repo, and it does work correctly. https://github.com/ExpressLRS/ExpressLR ... c/ELRS.bas

Hi, will this script support elrs version 3.x.x?

Probably the one with soft rubber tip?

sq1hma wrote: ↑

Tue Jul 26, 2022 1:29 pm

Hi I have a problem witch X9D last update 2014, yesterday after upgrading the radio from the 2014 version to the latest version, the transmitter starts up you can hear it is working, but the LCD display is dead.
Please help.

What firmware?

Ok, thx for your reply.

Hi, i ordered a power supply for the taranis x9d+accst on T9 hobby uk and they sent me one with 15v, 0.5a, instead of a 13v, 0.5a.
Is it safe to use it to charge the stock battery?
Thx

Hello all, I hope everyone is doing well. I'm not sure if I should have created a new topic? Sorry for all the questions, I just want to be sure about these things before spending any money. As far as I can see, the elrs module will work with the 9xr pro when erskytx is updated to the latest versio...

Mike i have donated you 10£, so you can enjoy a warm cup of tea. Thx for your effort .

Hi Mike, is there a possibility to
1 - add a swr/ras value reading somewhere in the radio menus and
2 - while using the multiprotocol module, a firmware version reading in the protocol selection page for the (and not only) Irangex IRX4+?
Thx.

This is a great script, how's the development going?
cheers.

I dont know what have i done, but suddenly it started working fine. I copied that file to the firmware folder, but didnt flashed it, so i assume the 9xtreme flashed it.

Hi Mike, after watching closely, I realised that the situation is straight forward. What happens, is that the screen changes color several times and ends with a red light. Which probably means that it failed to flash. You probably noticed above. There is this user that says it is possible to flash w...

The first time, there a was sequence alright, but I don't remember what was because it was a bit fast. Then it went to the switch error screen. Now everytime I power on the radio, that screen shows up. Edit: Every time I unplug the battery and plug it again and turn on the radio, I see that the flas...

So I'm, for what I have read, there is no solution for this green chip 9x boards with the 9xtreme. I added this board, but this switch error shows up. at power on it seemed to flash the firmware, but then the error show on the screen. one can hear the welcome message though. https://openrcforums.com...

Ok, so that means that it is possible to configure or chose options (d8, d16 or LR12) via the menu, replacing the dip switches?

baggers50 wrote: ↑

Sun Mar 27, 2022 3:24 pm

Quick question a new club member has arrived with a very old 9XD plus can I upgrade this to the latest version of firmware or is there a limit to where I can upgrade?

Many thanks

Ian B

Actually you have 3 options to chose from:
ErskyTx v223;
Edgetx v2.7.1;
Opentx 2.3.15.

Hi all, with my x9d+ internal module gone bad, what's the chance of adding a frsky xht module and setting it up from the software? Is that possible?
Thx.

Hi, suddenly my taranis started sound antenna malfunction detected, or something like that, so I decided to swap the antenna, but the problem persisted. Lately I noticed that in lr12 and d16, the ras value, goes up to 80, which is terrible, I know, but in d8 mode it oscillates between 0 and 4, so it...

Updates to splash screen library.

Hi Octavio, I think, there is an issue with the ss.rar file. Unpacking here (DEBIAN Linux) gives txt files with zero size. Bildschirmfoto_2022-06-25_09-29-15.png br KH Hi, I just downloaded and tested and it works fine. Im on windows though. I added another 7zip archive. Try if it works for you.

Hi, not founding good enough splash screens(imo), i decided to make my own.
Although they dont have the right size (480x272), they fit very well.
Enjoy.
EDIT
For those using erskyTX, i have done two.

You have several options: ExskyTx r223 - https://www.er9x.com/ Edgetx Black Pearl 2.7.1 - https://edgetx.org/ And OpenTX 2.3.15 - https://www.open-tx.org/ They are all good and you have to find out for yourself which one suits you better. The best way to know that is to use each one at the time for ...

Oh, OK. Fine with me. It's just because as it was a stable release(r223) , I thought that maybe it should not be there?

I'm getting these numbers on my 9x with 9xtreme upgrade board. I don't get them in my 9xr pro.
Im using r223 stable version.

Thx Mike. I would never guess that a receiver still uses telemetry com port for binding, even though it doesn't support telemetry. Now I know.

[SOLVED] The only reason for the receivers not binding was the fact the telemetry com port 1 was not inverted. I just inverted com port 1 and everything went fine. Even for the receivers that do not support telemetry, like the ones above, you need to invert that com port in the model telemetry menu.

With these receivers and the 9xr pro with the orangerx module (9xr pro exclusive module) everything works fine.
With the same settings and the above receivers, nothing.

After searching for a while and not finding it, i decided to make a similar one. For those nostalgic guys who still have and love this radio as i do. Its not that i dont like the Erskytx splash screen, wich i do, so one radio has this SS and the other has ErskyTx. Fair enough. Enjoy. :) https://open...

Im using for a while as 2s battery and so far no issues. By far the best solution out there.

Here is the updated link. Is there any specific reason i cannot bind this module to the receivers below? What happens is that, during the binding procedure, the light blinks fast, and then it slows, as if it was binding, but the light goes off and not solid. it simply wont bind. I get a solid light...

That's it Mike. It works as expexted. I indeed had a safety switch which i dont remember to add, since this was a new model. Anyway this is solved. Thx a lot for your time. Kind regards..