openrcforums

Nice work with your 9x. Its an absolute beast. For the gimbals, you might have a look at this mod https://openrcforums.com/forum/viewtopic.php?p=154744&hilit=9xr+pro+gimbals#p154744 and get some ideas, because i have doubts that the holes will match, because radiomaster tx16s gimbals look smaller.

So it was a cable problem. All working.

When i try to flash through eepskye, a message appears "Tx disk not mounted" and simply wont flash.
At this time the radio wont power on anymore. Its completely dead.

Scripts are here: https://openrcforums.com/forum/viewtopic.php?f=7&t=10668 . I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it. Mike Hello, sorry to bother you again. Just want to know if a crossfire module will work...

I will try again, but i never had a problem with updating a tx in dfu mode, in fact, just before this one i updated another taranis and all went ok, but i will give it another try.

Kilrah wrote: ↑Sun Mar 05, 2023 10:34 am That's a fuse, it's supposed to be short...

It figures...
Thx for your reply. Do you know what might be wrong for not being able to flash in dfu mode?

Usb connection is not working with my x9d turned off. It is recognized on pc, as I see stm32bootloader on device manager, but I cannot flash, since an error occurs. Later I realize that https://openrcforums.com/forum/download/file.php?mode=view&id=20935 is shorting. What component is it and is i...

Hi, can anybody, post here a working script for elrs v3 to use with the 9xr pro, thx. Im not good with software editing. Thx in advance.

CptanPanic wrote: ↑Thu Oct 14, 2021 10:07 am So I found the newer version of script in official repo, and it does work correctly. https://github.com/ExpressLRS/ExpressLR ... c/ELRS.bas

Hi, will this script support elrs version 3.x.x?

Probably the one with soft rubber tip?

sq1hma wrote: ↑Tue Jul 26, 2022 1:29 pm Hi I have a problem witch X9D last update 2014, yesterday after upgrading the radio from the 2014 version to the latest version, the transmitter starts up you can hear it is working, but the LCD display is dead.
Please help.

What firmware?

Ok, thx for your reply.

Hi, i ordered a power supply for the taranis x9d+accst on T9 hobby uk and they sent me one with 15v, 0.5a, instead of a 13v, 0.5a.
Is it safe to use it to charge the stock battery?
Thx

Hello all, I hope everyone is doing well. I'm not sure if I should have created a new topic? Sorry for all the questions, I just want to be sure about these things before spending any money. As far as I can see, the elrs module will work with the 9xr pro when erskytx is updated to the latest versio...

Mike i have donated you 10£, so you can enjoy a warm cup of tea. Thx for your effort .

Hi Mike, is there a possibility to
1 - add a swr/ras value reading somewhere in the radio menus and
2 - while using the multiprotocol module, a firmware version reading in the protocol selection page for the (and not only) Irangex IRX4+?
Thx.

This is a great script, how's the development going?
cheers.

I dont know what have i done, but suddenly it started working fine. I copied that file to the firmware folder, but didnt flashed it, so i assume the 9xtreme flashed it.

Hi Mike, after watching closely, I realised that the situation is straight forward. What happens, is that the screen changes color several times and ends with a red light. Which probably means that it failed to flash. You probably noticed above. There is this user that says it is possible to flash w...

The first time, there a was sequence alright, but I don't remember what was because it was a bit fast. Then it went to the switch error screen. Now everytime I power on the radio, that screen shows up. Edit: Every time I unplug the battery and plug it again and turn on the radio, I see that the flas...

So I'm, for what I have read, there is no solution for this green chip 9x boards with the 9xtreme. I added this board, but this switch error shows up. at power on it seemed to flash the firmware, but then the error show on the screen. one can hear the welcome message though. https://openrcforums.com...

Ok, so that means that it is possible to configure or chose options (d8, d16 or LR12) via the menu, replacing the dip switches?

baggers50 wrote: ↑Sun Mar 27, 2022 3:24 pm Quick question a new club member has arrived with a very old 9XD plus can I upgrade this to the latest version of firmware or is there a limit to where I can upgrade?

Many thanks

Ian B

Actually you have 3 options to chose from:
ErskyTx v223;
Edgetx v2.7.1;
Opentx 2.3.15.

Hi all, with my x9d+ internal module gone bad, what's the chance of adding a frsky xht module and setting it up from the software? Is that possible?
Thx.

Hi, suddenly my taranis started sound antenna malfunction detected, or something like that, so I decided to swap the antenna, but the problem persisted. Lately I noticed that in lr12 and d16, the ras value, goes up to 80, which is terrible, I know, but in d8 mode it oscillates between 0 and 4, so it...

Updates to splash screen library.

Hi Octavio, I think, there is an issue with the ss.rar file. Unpacking here (DEBIAN Linux) gives txt files with zero size. Bildschirmfoto_2022-06-25_09-29-15.png br KH Hi, I just downloaded and tested and it works fine. Im on windows though. I added another 7zip archive. Try if it works for you.

Hi, not founding good enough splash screens(imo), i decided to make my own.
Although they dont have the right size (480x272), they fit very well.
Enjoy.
EDIT
For those using erskyTX, i have done two.

You have several options: ExskyTx r223 - https://www.er9x.com/ Edgetx Black Pearl 2.7.1 - https://edgetx.org/ And OpenTX 2.3.15 - https://www.open-tx.org/ They are all good and you have to find out for yourself which one suits you better. The best way to know that is to use each one at the time for ...

Oh, OK. Fine with me. It's just because as it was a stable release(r223) , I thought that maybe it should not be there?