Search found 579 matches

by OctavioS
Thu Aug 09, 2018 9:51 pm
Forum: Turnigy 9XR PRO radio
Topic: CPU temperature at 59º
Replies: 5
Views: 365

Re: CPU temperature at 59º

Thx Mike & João i feel so much better.
by OctavioS
Thu Aug 09, 2018 8:26 pm
Forum: Turnigy 9XR PRO radio
Topic: CPU temperature at 59º
Replies: 5
Views: 365

CPU temperature at 59º

Hi, i have 2 9xr pro and one of them has a average 26ºC cpu temperature,
IMG_20180809_211641.jpg
The good one.
while the other is at average 59ºC. Do you think something is wrong?
IMG_20180809_211704.jpg
the bad one?
Both have ersky9x latest test version (ersky9xProvR222b6.zip 02-Aug-2018 18:19) installed!
Thanks!
by OctavioS
Fri May 25, 2018 7:57 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Mike, after flashing the test version just above mentioned, i went back to the ersky9x9XT_romDbg1.zip22-Apr-2018 20:26 and kept repeating the procedure trying to replicate the eeprom bug, but to no avail. Everything seems to be working right since then. If you have any recomendation, please let me k...
by OctavioS
Mon May 14, 2018 11:46 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR/9XR pro faceplate mod
Replies: 15
Views: 1414

Re: 9XR/9XR pro faceplate mod

I thing you made the right choice, as the 4d would get too shiny. Thx for the info. I will do that. Do you mind adding you file to thingiverse?
by OctavioS
Sun May 13, 2018 10:17 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR/9XR pro faceplate mod
Replies: 15
Views: 1414

Re: 9XR/9XR pro faceplate mod

Hi, did you use the 3d or 4d carbon fiber vinyl sticker? thx
by OctavioS
Sun May 06, 2018 1:48 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Hi @MikeB, unfortunately i havent been able to reproduce the eeprom error, after several daily attempts, since the last post. So, today i installed the latest test version ersky9xProvR222a6.zip - 25-Apr-2018 19:17, to see if anything related happened, but nothing happened. Now im wondering if you im...
by OctavioS
Mon Apr 23, 2018 12:20 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Mike, i instaled the test version pointed by the green arrow an after several times, i could'nt reproduce the error. I then installed the test version pointed by the red arrow and it happens again. Sem Título.jpg I will again install the above debug test version and keep trying untill i get an error...
by OctavioS
Sun Apr 22, 2018 7:02 pm
Forum: openTx
Topic: OpenTX 2.2.x Manual
Replies: 20
Views: 6852

Re: RE: Re: OpenTX 2.2.x Manual

Thanks Mike. In order to reduce the verbosity of the manual I'm sticking as much as possible to OpenTX related content. You suggestion while useful would fall under a Tx modification in my arbitrary opinion :) Damn arbitrary. Your reply makes no sense. I might need to open the radio to replace the ...
by OctavioS
Sun Apr 22, 2018 1:15 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Mike, when i power on the tx with the trim to the left, i dont get the square anymore and the character goes up to "h". After that i get the splash screen and i have access to hardware menu. The problem is that the keys are not very responsive. In order to go to menu screen i have to press menu for ...
by OctavioS
Fri Apr 20, 2018 11:22 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Mike, i just tested it and everything is the same. Same exact erratic behaviour. Can you please tell me what eeprom chip should i be looking for so i can replace the existing one, thx.
by OctavioS
Fri Apr 20, 2018 9:57 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: RE: Re: Ersky9x Bug Reporting

My current thought is a block of the EEPROM is failing to write properly. On the 9Xtreme, the EEPROM chip is actually double the capacity required. So, I've posted a special test version of ersky9x that uses the second half of the chip. Note that the bootloader won't "know" about this, so accesses ...
by OctavioS
Fri Apr 20, 2018 9:17 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

[emoji16][emoji16]

Enviado do meu ONEPLUS A5000 através do Tapatalk

by OctavioS
Fri Apr 20, 2018 5:13 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: RE: Re: Ersky9x Bug Reporting

jhsa wrote:Ok, so they didn't really die :D

João
Yes, not really. I have to commit myself, but right now I have more urgent matters to attend to.

Enviado do meu ONEPLUS A5000 através do Tapatalk

by OctavioS
Fri Apr 20, 2018 5:07 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

One them is on standby because of the rotary encoder mod, I'll have to get back to it, but I don't have the time right now. And the other started having problems with the throttle gimbal, which I have to check the solder, also no time right now. Still have plenty of radios though. 2 9xr pro, 2 taran...
by OctavioS
Fri Apr 20, 2018 4:23 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

I just finished disassembling and assembling the radio in order to clean the spring loaded pads and where they sit on the main board. For my surprise things are the same. Damn one by one my 9xtreme radios are dying. This was the only one working fine so far,and now gone? Hope there's a fix Mike.
by OctavioS
Fri Apr 20, 2018 3:36 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Hi Mike, after flashing the eeprom, the message in IMG_01 shows up; IMG_01.jpg I pressed "any key" and the message in IMG_02 showed up for a short moment, but it returns to IMG_01; IMG_02.jpg IMG_01.jpg After trying for several times the above mentioned procedure and being stuck in the first message...
by OctavioS
Fri Apr 20, 2018 12:13 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: RE: Re: Ersky9x Bug Reporting

I just tried that on my 9XT (the file seems to be the .bin file, not compressed). I couldn't reproduce your problem. I'll see if I can add some debug to locate where your problem is occuring. To help, what, exactly, happens on our radio? I get the "Hardware enabled" message, then when I release the...
by OctavioS
Thu Apr 19, 2018 10:03 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Here it is Mike.
OctavioS_9xt.rar
(512 KiB) Downloaded 124 times
by OctavioS
Wed Apr 18, 2018 4:24 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Hi Mike, sorry to keep you wayting, but here it is.
Edit: [file replaced] Sorry again, i think this might be it.
OctavioS_9xt.rar
(512 KiB) Downloaded 74 times
by OctavioS
Tue Apr 17, 2018 5:59 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Yes, the message keeps displaying untill i relase the trim switch.
by OctavioS
Mon Apr 16, 2018 11:16 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Yes the black square disapears (it only shows up for a second or less) and the boot reason is "WATCHDOG".
Powering on normally shows boot reason "POWER ON".
by OctavioS
Mon Apr 16, 2018 7:12 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Yes Mike, the top one is counting very fast, the middle one has a fixed value of "001E" and the bottom one shifts slowly between "0000" and "0002" back and forth. Hope it helps.
by OctavioS
Sun Apr 15, 2018 9:24 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Its 0.7. I always check for updates after new version, test or stable.
by OctavioS
Sat Apr 14, 2018 2:05 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Do you think it's wise to put some grease on the pads before assembling the 9xtreme to prevent oxidation?

Enviado do meu ONEPLUS A5000 através do Tapatalk

by OctavioS
Sat Apr 14, 2018 11:19 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

The square only happens when i try to activate the hardware menu. My guess is that the probable cause will be the comunication problem between the 9xtreme and the mainboard, that Mike describes. I will clean the pads and if the problem persists i will post the eeprom here. Thx for the support.
by OctavioS
Sat Apr 14, 2018 10:05 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

I also notice that when itry to activate the hidden menus, after i release the required trim switch, a square is shown at the top left corner os the screen and when the radio boots after that, the voltage starts very low and rapidly increases as if the radio resets or crashes.
by OctavioS
Sat Apr 14, 2018 9:35 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

I also flashed the latest stable ersky9x, and still the error occurs.
Is there a way to reset the eeprom?
by OctavioS
Sat Apr 14, 2018 9:30 am
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: Ersky9x Bug Reporting

Mike, i think its important to mention that eepskye doesnt recognise the file. I am the one to blame, since in a strike of dumbness, i changed the file options when the "new" window poped up.
Sem Título.jpg
In order to flash i changed the file association to the second option and thus it was possible.
by OctavioS
Fri Apr 13, 2018 11:33 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: RE: Re: Ersky9x Bug Reporting

Mike, perhaps it is a good idea to implement different file extensions for ersky9x and er9x? This would include models, eeproms, general settings, etc.. Could the file extensions have more than 4 characters? For ersky9x and eepskye: eeprom - .epskye models - .epskym General settings - epskyg The pr...
by OctavioS
Fri Apr 13, 2018 11:32 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 195
Views: 24718

Re: RE: Re: Ersky9x Bug Reporting

MikeB wrote:That "template" is for er9x. How did you flash it to the radio?

Mike
It was through eepskye. I opened the file through open in eepskye and then sent to radio, by right clicking. Actually I was not aware it was for eepe.

Enviado do meu ONEPLUS A5000 através do Tapatalk

Go to advanced search