openrcforums

Hi all, I noticed that when i was configuring the swashring in the heli menu of ersky9x, the angle was decreasing along with the value (0 - 100), but when it reached 0 the swashring had the same value as 100, which means that the swashring had a full swing / amplitude. This shouldn't be normal, right?

How do you adjust the swash ring in the heli menu? I have assigned it to channel 12, like you have it there, but when i change the value (0-100) i dont see the swash ring move. Edit: I found out that the 0 value has the same response as the 100, so from 1 to 100 it will work fine as long as you avoi...

Check this video https://www.youtube.com/watch?v=e5wn6aAY7EU . Although for the majority of the flybarless helis you choose the 90 swashplate, for the 3gx, you have to choose 120 swashplate and assign a channel for collective. ps: the video is in pt-br, if you pay attention to the images you will ca...

An eepm file for those who want it already setup. I changed a couple of things from my tutorial: 1. For the mixes on CH11. I now do one mix as ID0 and the other as !ID0. This saves one mix as the idle up modes use the same curve. 2. the force zero pitch mix now uses 0% FULL instead of an empty curv...

Hi Guys, I have an issue that I want to make clear. I'll try not to be too blunt but please please please stop emailing me directly and asking for help / making suggestions. It's not that I don't appreciate it. I really do. However I've been getting in exccess of 20 emails a day just asking questio...

Ok, its just that i've seen that its possible to change from master to slave and vice versa, via AT command. I thought that that was already possible, but according to João BT usability its still very limited, so ill just wait your further development instead of venturing myself into "murky&quo...

Ok. What about BT as command mode, means that i can use this option to "issue" AT commands like for arduino?

Because I can add something to output serial quite quickly, which might go out over bluetooth which is serial anyway, while the USB joystick solution will take rather longer. Does FMS handle enough channels over a joystick input anyway? Mike. I assume that, if i choose the BT as trainer on, then ma...

EDIT: I see you've found the problem. I reemphasize, for this and any other such problem, always go to the monitor screen FIRST. At least half the time the problem will be immediately apparent. Yes, the problem is solved, but being a newbie myself (1.5 years in the rc world), it takes sometime to g...

I think you are confusing pots and switches. It think you want to know if Taranis S1/S2 pots can be used to replace used to replace 9x P1/P2/P3 pots . Not sure of the answer, but I think that makes the question clear. Exactly, but also the gimbals have pots and to avoid confusion i did it like this...

By the way Octavio, do you have more than 4 channels configured on your taranis? Do you see any movement in channel monitor on your taranis on channel 5, 6 , 7 , 8 ... ? Actually no, because i thought, "wrongly", that the sim would assume any switch that i would assign. :( So, that must b...

kalle123 wrote:
Did you make the settings according to that video?

https://www.youtube.com/watch?v=c3FUXcevbwk

Yes, that was actually the video i watched when first configured it.
dont know what is "mpx radio".

So, I guess, the problem is with you, not with that dongle .... ;) br I have to agree with you. And at least in this case im happier that way. :) Can you please enlighten me then, because i dont know what else to do for the other channels to work or to showup. Is there anything in the configuration...

Realflight RC7 ok, i dont have that one. Octavio, that one works here with PhoenixRC. But it is not quite legal. Yes, and I have the original PhoenixRC dongle ;) Me too, the same (5.0v). But in case your stock original dongle stops working, and mine is out of warranty time, this is a nice backup. U...

tonnie78 wrote:Yes I used that dongle on the Taranis trainer port and it gave me 8 channels.

Really?
Which simulator do you use?

Does anybody know if its possible to make these chinese usb simulator dongles accept more than 4 channels?
Thx!

MikeB wrote:

OctavioS wrote:I think i named wrongly what i was refering to. I meant the S1 and S2 switches/encoders. The 9x has 3 of them and the taranis has 2.

As long as you can get them to fit mechanically, there should be no problem electrically.

Mike.

Thx Mike. That's what i needed to hear.

Is it possible to replace the 9x pots for these similar ones, since the quality and resolution are better?

i use JR trainer port and this cable: http://www.ebay.com/itm/USB-Flight-Simulator-FMS-Cable-for-JR-Futaba-RC-Simulator-/390611117924?pt=AU_Toys_Hobbies_Radio_Controlled_Vehicles&hash=item5af23ca764 Radio is off, when i plug trainer cable. I also see that that dongle is for the FMS Sim and for ...

I think i named wrongly what i was refering to. I meant the S1 and S2 switches/encoders. The 9x has 3 of them and the taranis has 2.

We have this topic about the taranis gimbals in a 9X, which works fine and it is a great improvement to this radio. What about the taranis pots in a 9X? Im sure somebody gave it a thought. Is it possible? will the radio resist or the 5v regulator will not handle this mod?

I think this is a relevant issue just for the simulator. If i change the polarity to negative and/or use the jr port,everything is ok. No big deal.With a real model there will be no issues, i assume.

No, no module.
I think i read something about the futaba port and the module bay pins sharing connections.

Exactly! So i decided that i would reflash several versions untill back to 08-Oct-2014 11:15, just to see what was the difference from a user perspective. What i concluded is that this always existed, only before, because the polarity was inverted i never noticed. So all in all, this was allways her...

Yes i can, but the point here is to fix this possible issue and not go back just because it works. The question is: it worked before, why not now?

The test version i had installed on my tx prior to the present one was the one released on 08-Oct-2014 11:15

Sorry for any inconvenience, but since i was reporting something odd in the futaba port, i gathered that one would make a "connection" to the 9xr pro, since the 9x doesnt have a futaba port. Anyway this happens with the 9xrpro (ersky9x-r214, from 28-01-2015 - 17:34:50 - test version). I al...

So this is what follows: normally i use the futaba port to use with the simulator and i found out that when you plug to the simulator using the that port while the selected polarity is positive, the radio will behave erratically*. If i choose the negative everything goes well. with the JR port it d...

So this is what follows: normally i use the futaba port to use with the simulator and i found out that when you plug to the simulator using the that port while the selected polarity is positive, the radio will behave erratically*. If i choose the negative everything goes well. with the JR port it do...

Hi, i have been trying to use the 9xr pro with the simulator, both phoenix rc 5.0v and aerofly rc7 and one thing in common is that rudder is not detected on both sims. Adding to that in phoenix rc i get a pulsing channel 7 and this never happened before. I tryed with in model trainer option on and ...