Search found 27 matches
- Sat Apr 09, 2022 9:02 am
- Forum: FRSky Horus radio
- Topic: Broken USB board - How do I upload models?
- Replies: 1
- Views: 3118
Broken USB board - How do I upload models?
The USB board on my X12s is broken and i now can't talk to OpenTx companion. I'm waiting on the replacement board to arrive but in the meantime, I need to upload the models to the X12. I copied the models to the SD card manually but when I put this card back into the Tx, it loads an ancient version ...
- Tue Dec 24, 2019 9:09 pm
- Forum: openTx
- Topic: Run a motor for a set time
- Replies: 4
- Views: 3377
Re: Run a motor for a set time
Thanks for the replies.
Basically I want to link the winch to SC:
SC(up): winch run for 24 seconds to pay out cable.
SC(mid): winch off - This will be the default position.
SC (down): winch run for 24 seconds to reel in cable.
Basically I want to link the winch to SC:
SC(up): winch run for 24 seconds to pay out cable.
SC(mid): winch off - This will be the default position.
SC (down): winch run for 24 seconds to reel in cable.
- Tue Dec 24, 2019 6:07 pm
- Forum: openTx
- Topic: Run a motor for a set time
- Replies: 4
- Views: 3377
Run a motor for a set time
Is there a way to activate a channel for a set period of time?
I have a motorised winch that i would like to run for 24 seconds after the switch is operated and then stop.
Horus X12s OpenTx 2.2
I have a motorised winch that i would like to run for 24 seconds after the switch is operated and then stop.
Horus X12s OpenTx 2.2
- Fri Apr 12, 2019 2:18 pm
- Forum: Hardware
- Topic: X12s Clock resetting
- Replies: 0
- Views: 1686
X12s Clock resetting
Hi folks,
The clock on my X12s keeps resetting to 00:00 every time I switch the radio off.
I've replaced the C1220 internal battery but it's still resetting.
Any advice welcomed.
CK
The clock on my X12s keeps resetting to 00:00 every time I switch the radio off.
I've replaced the C1220 internal battery but it's still resetting.
Any advice welcomed.
CK
- Fri Dec 14, 2018 2:39 pm
- Forum: openTx
- Topic: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
- Replies: 28
- Views: 71283
Re: OpenTX 2.2 Documentation for the Taranis and Horus Transmitters
Great work. Well done. I've just skimmed through this as I was printing a copy and I've already found a few things that would have saved me lots of heartache whilst I was learning to program my X9D. I've just picked up an X12s so this will be invaluable as I get to grips with setting up the new radio.
- Sun Aug 20, 2017 6:28 am
- Forum: General help (FrSky Taranis radio)
- Topic: Electromagnetic wheel brakes - proportional control
- Replies: 3
- Views: 3130
Re: Electromagnetic wheel brakes - proportional control
Thanks for the help.
I kinda thought that would be the case.
I kinda thought that would be the case.
- Sat Aug 19, 2017 5:49 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Electromagnetic wheel brakes - proportional control
- Replies: 3
- Views: 3130
Electromagnetic wheel brakes - proportional control
Hi all,
I have a set of Electromagnetic wheel brakes on the main gear of my F4 Phantom model.
Currently, I have them operating via LS on my X9D but they are either ON or OFF.
Is there a way to make them proportional? I was thinking some sort of curve?
Thanks in advance
Craig
I have a set of Electromagnetic wheel brakes on the main gear of my F4 Phantom model.
Currently, I have them operating via LS on my X9D but they are either ON or OFF.
Is there a way to make them proportional? I was thinking some sort of curve?
Thanks in advance
Craig
- Tue Mar 24, 2015 4:31 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Limiting servo travel to one direction
- Replies: 2
- Views: 2424
Re: Limiting servo travel to one direction
Thanks Mike.
I'll give that a try and see how I get on.
I'll give that a try and see how I get on.
- Tue Mar 24, 2015 10:56 am
- Forum: General help (FrSky Taranis radio)
- Topic: Limiting servo travel to one direction
- Replies: 2
- Views: 2424
Limiting servo travel to one direction
Hi folks, I want to limit the travel of the canards on my model so that they will only operate in one direction (canards move down when up elevon is applied). Currently they are on a separate channel which is slaved to the elevon input but they are moving in both directions. any help would be apreci...
- Tue Mar 24, 2015 10:49 am
- Forum: General help (FrSky Taranis radio)
- Topic: Taranis Plus Haptic feedback not working?
- Replies: 3
- Views: 3859
Re: Taranis Plus Haptic feedback not working?
I found something similar after I installed a haptic module in my X9D . You need to download the firmware with the HAPTIC function enabled. Go to the SETTINGS menu in Companion and ensure that you check the box for HAPTIC. You'll be given a prompt to say that you've not downloaded this before, accep...
- Sat Jan 17, 2015 5:39 pm
- Forum: FrSky Taranis radio
- Topic: Taranis and flight simulators
- Replies: 49
- Views: 62335
Re: Taranis and flight simulators
Will do a bit later today. I only did a quick and rough setup to make sure it worked. Meanwhile, could you please confirm that all 7 or 8 channels are working correctly on the Channel Monitor screen. Also that in the Phoenix Model Setup you have Trainer Mode set to Slave. I assume you do, because y...
- Tue Jan 13, 2015 7:57 am
- Forum: FrSky Taranis radio
- Topic: Taranis and flight simulators
- Replies: 49
- Views: 62335
Re: Taranis and flight simulators
Would you mind sharing the .eepe for that setup so that I can compare with my own and see where I am going wrong?Daedalus66 wrote:I hooked up my Taranis to Phoenix and all channels are working correctly.
- Mon Jan 12, 2015 8:32 pm
- Forum: FrSky Taranis radio
- Topic: Taranis and flight simulators
- Replies: 49
- Views: 62335
Re: Taranis and flight simulators
[quote="Daedalus66"]Did you program the necessary switches, etc. in Taranis? Unless you did, you will only have a basic four-channel model. The first thing to do before even bothering to hook up to Phoenix or RF is to go to the graphic output screen on Taranis and make sure it is generatin...
- Mon Jan 12, 2015 7:58 pm
- Forum: FrSky Taranis radio
- Topic: Taranis and flight simulators
- Replies: 49
- Views: 62335
Re: Taranis and flight simulators
I have no experience with commercial software; however I would like your views on how good those two are. Getting back to your problem... For the none commercial software that I have used you must have... Internal Radio System OFF External Radio System OFF Trainer Mode Slave Start channel to match ...
- Mon Jan 12, 2015 3:23 pm
- Forum: FrSky Taranis radio
- Topic: Taranis and flight simulators
- Replies: 49
- Views: 62335
Re: Taranis and flight simulators
Can anyone help me out? I've got the Taranis set up on Phoenix 5 & RealFlight 7.5 but the models only work on 4 channels. When I go through the calibration options in each program, the switches I've assigned for flaps, gear etc are being detected but there is nothing happening on the models. I u...
- Sat Dec 20, 2014 3:12 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Make the Taranis say the Models you select?
- Replies: 2
- Views: 2971
Re: Make the Taranis say the Models you select?
Just tried that out - works perfectly.dinamich wrote:From the top of my head, use "ONE" for the condition of special function that would play your model's wav file.
- Sat Dec 20, 2014 3:08 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Using multi-position & Logical switches to select BGM
- Replies: 4
- Views: 4213
Re: Using multi-position & Logical switches to select BGM
Ok, so far I have managed to set up logical switches that allow me to assign a track to each position on S1: L(x) AND SH (dn) SH (dn) S1(x) The corresponding track is setup using the special functions: SF(x) L(x) PLAY TRACK **title** Now all I have to do is figure out a way of being able to override...
- Sat Dec 20, 2014 1:14 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Using multi-position & Logical switches to select BGM
- Replies: 4
- Views: 4213
Re: Using multi-position & Logical switches to select BGM
Thanks Davx
That has sorted the Sticky on SH and i can now turn on the music using that switch.
I'm still trying to work out the correct way to select the track via S1 and logic switches.
That has sorted the Sticky on SH and i can now turn on the music using that switch.
I'm still trying to work out the correct way to select the track via S1 and logic switches.
- Sat Dec 20, 2014 10:01 am
- Forum: General help (FrSky Taranis radio)
- Topic: Using multi-position & Logical switches to select BGM
- Replies: 4
- Views: 4213
Using multi-position & Logical switches to select BGM
Hi folks, I have replaced S1 with the 6-position switch and I currently have different background music tracks assigned to some of the positions for use in various stages of flight with a particular model. At the moment, I turn the switch to whatever track I wish to use and it plays straight away. I...
- Sun Dec 14, 2014 12:02 pm
- Forum: Software
- Topic: Acessing sound files in Open Tx Companion
- Replies: 1
- Views: 4285
Re: Acessing sound files in Open Tx Companion
Never mind folks! Managed to figure it out. I hadn't told Companion where to find the required files.
I created a copy of my SD card in a folder on my PC and then set the "SD Structure Path" within the "settings" of Companion to look there for the files.
I created a copy of my SD card in a folder on my PC and then set the "SD Structure Path" within the "settings" of Companion to look there for the files.
- Sun Dec 14, 2014 9:03 am
- Forum: Software
- Topic: Acessing sound files in Open Tx Companion
- Replies: 1
- Views: 4285
Acessing sound files in Open Tx Companion
Hi folks, When assigning sounds to special functions via Open Tx Companion, I can't select sound files for a model unless I've already used them by setting them up via the Taranis. Is it possible to access the full range of sound files on the SD Card from Companion? I have the latest updates to Comp...
- Fri Sep 19, 2014 12:13 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Alerts when timer has gone past zero
- Replies: 5
- Views: 4975
Re: Alerts when timer has gone past zero
Tried that out - works great on the Taranis. Thanks for your help.
- Sat Sep 13, 2014 5:38 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Alerts when timer has gone past zero
- Replies: 5
- Views: 4975
Re: Alerts when timer has gone past zero
That's great. I'll give that a try.ReSt wrote:I dont have the Taranis, but with a TGY9x I can do
Logical switch:
L1 a<x Tmr1 00:00 ID1
and special functions:
PlayVal Tmr1 L1 10
Will tell you the timer value every 10 seconds
Reinhard
- Mon Sep 08, 2014 12:03 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Alerts when timer has gone past zero
- Replies: 5
- Views: 4975
Alerts when timer has gone past zero
Is there a way to have some kind of audible alert once the flight timer has gone past zero? (Apart from the crunch of a model falling from the sky having run out of battery) :lol: My reasoning is for when trialing new battery setups and you know that the flight time will be longer but you don't want...
- Mon Sep 08, 2014 11:57 am
- Forum: General help (FrSky Taranis radio)
- Topic: FrSky Taranis buzzing from speaker
- Replies: 7
- Views: 7094
Re: FrSky Taranis buzzing from speaker
I found that if you angle the antenna away from the casing or have it pointing 90 degrees to the right of the case, the buzzing stops.
The buzzing isn't really that much of a problem whilst flying to be honest
The buzzing isn't really that much of a problem whilst flying to be honest
- Fri Aug 29, 2014 6:13 pm
- Forum: Hardware
- Topic: V8r7 7 or 8 channels?
- Replies: 4
- Views: 3509
Re: V8r7 7 or 8 channels?
Brilliant.
I have a V8R7-II
I think Hobbyking have got a mistake on their product info
I have a V8R7-II
I think Hobbyking have got a mistake on their product info
- Fri Aug 29, 2014 1:38 pm
- Forum: Hardware
- Topic: V8r7 7 or 8 channels?
- Replies: 4
- Views: 3509
V8r7 7 or 8 channels?
Hi folks, I'm new to Open Tx and was wondering if someone could clarify if the V8R7 is 7ch or 8ch? I have one and it clearly has 8ch ports but the website I bought it from describes it as 7ch. I'm pretty certain it has 8, but before I fit it to a model I'd like to be doubly sure. I'm flying with a T...