Search found 206 matches

by lancaster
Sun Aug 07, 2022 9:31 pm
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

Hi Mike Thanks for the reply. I purchased a new XJT module recently to eliminate this possibility but the problem still occurs. Furthermore the telemetry issue occurs with the TX16S using the XJT module as well as with the Turnigy 9X(Smartie parts converted) To summarise the XJT module gave telemetr...
by lancaster
Tue Jul 19, 2022 4:10 pm
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

Correct. There should be a connection on the 9X from the back board to the 9Xtreme. My guess is this has become disconnected. Mike [/quote] Hi Mike I cant see any connections that have come loose. No matter what firmware I use, the XJT will not allow the X6R to give telemetry. Although I have suppos...
by lancaster
Tue Jul 19, 2022 2:50 pm
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

MikeB wrote:
Tue Jul 19, 2022 1:33 pm
Correct. There should be a connection on the 9X from the back board to the 9Xtreme. My guess is this has become disconnected.

Mike
Thanks Mike
I will have a look inside the TX
regards
Hans
by lancaster
Tue Jul 19, 2022 11:44 am
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

Check also in the Telemetry menu that the "UsrProto" is set to "FrSky". There is a DEBUG menu under "Statistics". On the bottom line is "TelRxCount". Check the first number is changing quickly (the number of telemetry bytes received) and the second number is 0101. Mike Hi Mike In the DEBUG menu und...
by lancaster
Tue Jul 19, 2022 9:48 am
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

In the telemetry menu, what is the setting of "Telem Com Port"? (Should be COM1 for a XJT) Mike Hi Mike Thanks for the rapid reply - I was not expecting that It is a very strange problem I am having with telemetry It seems to have started with the TX16 and could have been related to the LUA script ...
by lancaster
Mon Jul 18, 2022 8:45 pm
Forum: Software
Topic: Voltage Sensor no longer reading
Replies: 10
Views: 2111

Re: Voltage Sensor no longer reading

Hi Ron I have experienced a similar problem with a Turnigy 9x Extreme. Using an XJT module and an X6R the telemetry sensors were operating well then after some weeks they no longer appear ( RSSI and RxBat) I have tried reflashing the module and the X6R - the receiver binds ok and seems to register t...
by lancaster
Thu Feb 04, 2021 11:43 pm
Forum: openTx model setup
Topic: Rudder and aileron sticks on one chan both operating rudder
Replies: 1
Views: 2401

Re: Rudder and aileron sticks on one chan both operating rudder

Hi
I have seen my problem - the latest Companion was giving a different presentation of mix symbals from my Radiomaster so it was leading me down the wrong track
Hans
by lancaster
Thu Feb 04, 2021 9:46 pm
Forum: openTx model setup
Topic: Rudder and aileron sticks on one chan both operating rudder
Replies: 1
Views: 2401

Rudder and aileron sticks on one chan both operating rudder

Hi CH1 RUD 100 0 ON OFF ON ON ADD AIL 100 0 ON OFF ON ON ADD I've been using this set up with ERSKY9X on 3 chan small indoor models for some time and it suits me well - still fools me into thinking I'm flying 4 channel! The problem is that I cant replicate it with OPENTX - any ideas ? Hans
by lancaster
Thu Feb 04, 2021 9:25 pm
Forum: erskyTx (was ersky9x)
Topic: Vario using flight controller
Replies: 1
Views: 2450

Re: Vario using flight controller

Hi
Converted to Radiomaster with OpenTX - this gives full information on vario in flight controller.
All information readily available and works perfectly!
Hans
by lancaster
Wed Dec 23, 2020 3:44 pm
Forum: erskyTx (was ersky9x)
Topic: Vario using flight controller
Replies: 1
Views: 2450

Vario using flight controller

Hi I noticed a recent video on YouTube by Andrew Newton using a flight controller barometer as a vario. He used smartport to get the vertical speed from the flight controller and then selected the vario source in Open TX. Can this be done with ersky9XT using Extreme9x? I am using the Extreme9x TX wi...
by lancaster
Fri Dec 14, 2018 5:56 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

Hi Mike Tested the Distance telemetry parameter today. 3 flights with maximum distance 1 mile The results seem to be reliable using units of feet and give great graphical results The values obtained will need to be multiplied by on average 3.28, so I will apply a multiplier of 328 and a divisor of 1...
by lancaster
Thu Dec 13, 2018 10:35 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

With everything connected up, go to the "model setup" menu and select "Telemetry". You should get a popup with 5 options, the last of which is "Sensors", select this. You should now see a list of "unknown sensors", that is sensors with IDs that are not handled automatically by ersky9x. Hopefully, o...
by lancaster
Thu Dec 13, 2018 7:18 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

Hi Mike
Thanks for taking the time to give me the details - I know you have many enquiries going
I will give it some testing
thanks again
regards
Hans
by lancaster
Thu Dec 13, 2018 10:54 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

Hi Mike Refering to Github:- When using the Frsky telemetry module, the parameter was described as calculated by Open TX https://github.com/iNavFlight/inav/blob/master/docs/Telemetry.md But with Smartport and a Flight control board, the sensor is now described as 0420 - distance to GPS home fix http...
by lancaster
Wed Dec 12, 2018 6:15 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

thanks for interest and putting the work in, Mike
I will let events unfold before proceeding
regards
Hans
by lancaster
Wed Dec 12, 2018 1:28 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions - telemetry sensors

Thanks for the quick reply and the help Mike
I will give it a try but I may need to come back for some more help with this procedure
regards
Hans
by lancaster
Tue Dec 11, 2018 5:16 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

I'm not aware of application ID 0420 being a "distance" value. It is not defined as such by FrSky, nor is it defined in the openTx code. What hardware at the receiver end are you using that might be sending a specific value with this ID? If such a value is being sent, then recent test versions have...
by lancaster
Tue Dec 11, 2018 11:57 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions - telemetry sensors

Hi Mike/Joao

I'm looking at logging RSSI against distance from home.
I have seen that Open TX has a sensor 0420 that gives distance from home but I cant find the equivalent in Ersky9x.
I'm using a Extreme9x with version R222c2
Any ideas?
regards
Hans
by lancaster
Wed Nov 14, 2018 1:04 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

Hi Joao Thanks for the rapid response and helpful information. I understand now - With previous versions, I could insert a model number in General and the model number ( and name) would be read from the list that I had put in the Root directory. But following your advice to put either number or name...
by lancaster
Wed Nov 14, 2018 11:56 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions - Model Voice Files on R222c2

Hi Mike/Joao Having a bit of trouble with model name voice files since downloading R222c2 on to the 9Xtreme. When editing a new model, the model voice file is now shown as a Name option only (previously was Number) although the old number options are continuing to play for old models. I have entered...
by lancaster
Wed Nov 14, 2018 11:42 am
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

MikeB wrote:
Tue Nov 13, 2018 11:33 pm
I have posted r222 c9, which supports the R9M flex firmware on most radios.

Mike
Mike, I really appreciate your hard work, you keep the hobby moving forward
Downloading R222 c9 to test now!
regards
Hans
by lancaster
Mon Nov 12, 2018 11:44 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

I've got something implemented, and at least the menu for selecting the operation seems to be working, although I think I'll need to do a few changes from something I've just read. What radio are you using? I'll build a specific test version for you to try. I haven't flashed my module and Rx to fle...
by lancaster
Sun Nov 04, 2018 10:35 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

hi budavaril
I'm using the latest EU firmware on the TX/RX but telemetry is only on 25mw
regards
Hans
by lancaster
Sun Nov 04, 2018 8:09 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

Hi Mike Just doing a bit more testing on the R9M and R9MM RX with the 9Xtreme (r222c2). I have found that with XJT protocol, I can get 16 channels at all power settings (unexpected ) but telemetry only at 25mw when bind is set to chans 1-8. Also I am able to select power levels of 200 and 500 in thi...
by lancaster
Wed Oct 17, 2018 8:55 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions

Mike
Impressive reply - I was temporarily stunned!

I will now spend some time digesting this

Many many thanks
Hans
by lancaster
Wed Oct 17, 2018 11:44 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2290
Views: 950818

Re: ERSKY9x Questions -voice file parameters

Hi Mike Just setting up voice file warnings on my Extreme using ersky9x9xt r222c There are several new inputs on this latest version and I can't figure out how the new Trigger and On delay parameters are working - I am getting strange results and interactions when selecting either All, Both and the ...
by lancaster
Mon Oct 15, 2018 9:23 am
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

Mike
Thanks for the rapid reply and excellent advice (11:16 on Sunday night!)
I can now carry on with testing
You keep the hobby going
many thanks
regards
Hans
by lancaster
Sun Oct 14, 2018 6:55 pm
Forum: ersky9xr
Topic: Frsky R9M
Replies: 67
Views: 43262

Re: Frsky R9M

Hi Mike Just testing the R9M module (red version EULBT from T9) in my 9X Extreme on the bench. I have loaded the test firmware ersky9x-pc2r222 from the zip file ersky9xProvR222c2. My receiver isn't wired up or bound yet so I am just checking out the TX protocol settings first and I have a couple of ...
by lancaster
Mon Aug 06, 2018 10:27 pm
Forum: Template Library
Topic: Help - Template needed for Vtail Glider
Replies: 9
Views: 11568

Re: Help - Template needed for Vtail Glider

Bob, Mike, Kilrah
Thanks for the help
Downloaded Companion to open Robs file and deciphered his mix (some messages about old versions - but I ignored these)
Now I need to work on transferring this to ErSky (9Xtreme)
many thanks guys - keep up the good work
regards
Hans
by lancaster
Mon Aug 06, 2018 10:43 am
Forum: Template Library
Topic: Help - Template needed for Vtail Glider
Replies: 9
Views: 11568

Re: Help - Template needed for Vtail Glider

RoB
downloaded the eepe.zip and opened it with UNZIPPRO (Winzipexpired) but cant open it in Eepe oe Eepskye
Any ideas?
regards
Hans

Go to advanced search