openrcforums

I have heard that it will not be OpenTx or er9x compatible , but their OWN in house software. FrSky also has their own update pathway that others have followed using dfuse. Believe it or not, there are far more Taranis in use with FrSky stock firmware than with updated OpenTX firmware. I don't reca...

Ah Ha
ppmus means ppm micro second.
Thanks Kilrah.

After update my Taranis radio with OpenTX 2.0.3
Servo page shoes now -512.0 --- 512.0 instead of -100.0 ---100.0.
Anyone noticed it?

Great Job done.
Many many Thanks to all developers revolutionizing RC world and usher in new RC era.

Yes, I worked on the model in companion. And then write back in the radio. The problem is solved.
As you mentioned, the model file was corrupted, I believe. I am sorry to bother you much.
Thanks a lot.

Hi, Kilrah.
I hope the model is corrupted. No other model in the radio have problem.
I attached my eeprom. (Please, remove 'zip' and write 'bin')
Regards

Now I can set all numbers as zero even in strange format. I can not set Range value with any number except zero because it changes 0.00 to 0000.00 back and forth when pushing + and - button. I had - values at A4 channel, Range, Low alarm and critical alarm, now I have positive value all the time. It...

I've noticed a strange format of A4 after flashed with ver 1.99.5, I believe. then I heard the beeping sound. I did not realized what is going on. I talked on this matter in the following thread; 'Taranis beeping constantly when connected to X8R'. Then I added the missing sound A3 and A4 after updat...

Did you check your settings in the Telemetry screen? After updating firmware 1.99.7, the A4 critical warning is somehow solved, but not perfectly. When pushing down + or - button of taranis radio on Range under A4 channel; the number is changing back and forth like 0.00v to 0000.00v. Not only this ...

Which are your parameters on A4? If you don't want any alarm on A4, you just have to put 0.00V on all its range/alarm values Somehow I got correct format (0.00v) for A4 vs -0000.00v previousely. (by refreshing the same firmware 1.99.6) But it still says A4 critical, with all zero value input, o.oov...

In companion, A1, A2, A3 and A4 have all same format, but in Taranis radio you will find the format for A4 is strange and also has - sign too.

I just add a few more sound such as A3_org.wav, A3_red.wav, A4_orgt.wav, A4_red.wav, rx_org.wav, rx_org.wav in system sound fold in my Taranis. There are some missing sound too 0110.wav etc in theKM_opentx sound pack, I just found. When linked to X8R receiver, now it says A4 critical instead of the ...

Thank you bertrand
For vario source there are some difference between companion and radio :
In companion as option, Alti, Alt+, A1, A2
in radio, Vspd, A1, A2, dTE.

The latest firmware version 1.99.5 was loaded in my Taranis radio. I found some bugs, I am reporting. In telemetry page, (1) in the low alarm and critical alarm of RxBatt the receiver max number are 6.83V. For two cell Lipo receiver it is too low, it need higher number like 7.4V. (2) Variometer sour...

Yes, I heard the beeping sound, so I was thinking to report whether it cause any serious problem or not.
You guys are already discussing here. Thanks
I am not just testing the new firmware, but actually I am flying with it.

Learning a lot.
After setting the input names, it shows correctly.
Thanks

Hi there I just registered to report what I just found something wrong in May 5 version. In logical switches, on the function such as a=x, a>x, a<x etc, there are something wrong in V1 values. In CompanionTX and Tx simulation these show [I1]Thr, [I2]Ail, [I3]Ele, [I4]Rud, Thr, Ail, Ele, Rud so on, b...