Search found 5 matches
- Thu Apr 28, 2016 7:25 pm
- Forum: openTx
- Topic: OpenTX won't flash
- Replies: 1
- Views: 1428
OpenTX won't flash
Hi all, Have a problem trying to flash OpenTX to my 9XR. Have connected the 9XR via the USBasp but for some reason when I go to write the firmware it only ever says "reading" but never actually writes. The USBasp seems OK because I wrote the er9X firmware no problem but when I try with Com...
- Wed May 07, 2014 8:05 pm
- Forum: Turnigy 9XR radio
- Topic: 9XR and XJT Telemetry
- Replies: 17
- Views: 11232
Re: 9XR and XJT Telemetry
Ok cheers, clears that up.
Thanks for all the help mike!
Thanks for all the help mike!
- Wed May 07, 2014 7:54 pm
- Forum: Turnigy 9XR radio
- Topic: 9XR and XJT Telemetry
- Replies: 17
- Views: 11232
Re: 9XR and XJT Telemetry
Thanks for the help. Got the converter and have it soldered together but only seem to be receiving the Rx values and not Tx values. I tried a 4 pin plug wired directly from the back of the XJT into the RS232 convertor no rule out any solder work I done but still not luck. Just wondering if you have ...
- Fri May 02, 2014 10:22 pm
- Forum: Turnigy 9XR radio
- Topic: 9XR and XJT Telemetry
- Replies: 17
- Views: 11232
Re: 9XR and XJT Telemetry
Thanks, that's alot clearer after you explained it to me. I will only be using this in the 9XR Tx anyway so the PDF you linked has it all down. Just having a look at it though it says this "As with all serial communications, care has to be taken with the names transmit (Txd) and receive (Rxd)&q...
- Fri May 02, 2014 6:52 pm
- Forum: Turnigy 9XR radio
- Topic: 9XR and XJT Telemetry
- Replies: 17
- Views: 11232
9XR and XJT Telemetry
Hi, Just wanted to ask the question is this possible, using the XJT in the 9XR and to get telemetry? I have done the mod to the Tx which is contained in this PDF Document off RCGroups PDF Document which again I don't know if its right because I have seen different guides where they don't use resisto...