Search found 53 matches

by pyr8
Sun Jul 17, 2016 5:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

MikeB wrote:I've posted a new test version that does process GPS Lat. and Long. I can't test it though as I don't have GPS on my APM! Mike.

Tested with GPS and it seems to work. HDOP and # of SAT's display!

Whats next Mike?
by pyr8
Fri Jul 15, 2016 6:21 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

I've posted a new test version that does process GPS Lat. and Long. I can't test it though as I don't have GPS on my APM! I've also tested using COM2 (fixed a bug) and this is now also working. I tested this on another 'PRO that has a HC-06 bluetooth module. Mission planner connected properly via b...
by pyr8
Tue Jul 12, 2016 11:26 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?

Geofrancis wrote:what version of opentx are you using to get telemetry with xjt? as far as i knew it only worked with er9x.
Whatever the latest release is! :)
by pyr8
Fri Jul 08, 2016 7:26 am
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

Looks great Mike, I have it working on my unit without Bluetooth at this point. One thing I noticed is the lack of RX/TX info across the bottom of the telemetry screen under Rssi & Rcq respectively.
by pyr8
Thu Jul 07, 2016 7:49 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

Mike, send me the firmware and ill test it out once you are done....CANT WAIT!
by pyr8
Thu Jul 07, 2016 7:43 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

After a few false starts, I have something working, although Mission Planner seems to require everything to be powered on in the correct order and at the right time. I'm using a 9XR-PRO with the single mod of "the wire from J8 pin TX1 to the 'C' pad on the RF board". My 9XR-PRO already ha...
by pyr8
Tue Jul 05, 2016 2:19 am
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

The only hardware change needed on the 9XR-PRO to use COM1 non-inverted, in both directions, is the wire from J8 pin TX1 to the 'C' pad to get ttl, non-inverted serial data from COM1 on pin 2 of the module connector. Leave the "wire 2" in place as that provides the receive data. What blue...
by pyr8
Mon Jul 04, 2016 9:07 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

You are using the INVERTED COM2 connections in that diagram (pins 1 and 2 of J7, pin 1 is the square pad). The non-inverted connections are those on pins 4 and 5 of J7 (labelled TX and RX). Mike. Got ya...so is it TX to TX or RX to TX and is it necessary to remove "wire 2" as per the &quo...
by pyr8
Mon Jul 04, 2016 9:04 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

I've got something beginning to work on ersky9x on the 9XR-PRO. Using COM1, receive only, I've connected the output from a FC directly to the radio, pin 5 of the module connector (a limited FC, no GPS). I'm receiving and decoding MavLink packets, and displaying some values, although the scaling may...
by pyr8
Mon Jul 04, 2016 5:48 am
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

NOT a typo, I really do mean J8 that is below and to the left of J18. J8 has the non-inverted COM1 TXD signal on it. My mistake...I went back and reread what you stated. :oops: At present, you may use COM2 for bi-directional communication to bluetooth on COM3, but not COM1. You may route COM1 recei...
by pyr8
Sun Jul 03, 2016 4:18 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

It should do so, as long as the radio firmware sets the hardware inverter correctly, and is able to decode the Mavlink data. I am looking to get the Mavlink decode into ersky9x. Mike. Thanks allot Mike...I (and others) have been waiting for this for some time now...awesome! A few more questions for...
by pyr8
Sun Jul 03, 2016 12:32 am
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

you are correct in that it would stop operation with sport xjt, i use a modified djt with ttl mod so that i can swap between openlrs and frsky telemetry by just changing modules since both are on ttl levels. The 9XR-PRO was designed to support both inverted RS2323 levels and inverted or non-inverte...
by pyr8
Sat Jul 02, 2016 3:32 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

you are correct in that it would stop operation with sport xjt, i use a modified djt with ttl mod so that i can swap between openlrs and frsky telemetry by just changing modules since both are on ttl levels. this could be improved by connecting the openlrs mod to com2 but i could never it it to wor...
by pyr8
Sat Jul 02, 2016 3:10 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

Mike, more clarification. He modified the schematic I sent him slightly: As far as crossing the TX & RX wires (Red & Yellow lines) in the schematic, that was me just trying to visualize the wiring. So it looks like: RF Board TX to COM1 RX RF Board RX to Bluetooth TX (No COM1 connection) I'm ...
by pyr8
Sat Jul 02, 2016 5:45 am
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

Apparently these are the connection modifications needed to the actual 9XR Pro: COM 1 TX to RF Deck RX COM 1 RX to RF Deck TX Bluetooth is an option if you want to be able to connect/control Mission Planner via tablet or other Bluetooth enabled device. Now I'm not clear and have not gotten any confi...
by pyr8
Fri Jul 01, 2016 8:26 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

His response: "Er9x won't read native mavlink, I had it working on a 9xr but the mavlink code was very out of date"
by pyr8
Fri Jul 01, 2016 8:17 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

The 9XR-PRO has a programmable inverter on the received telemetry signal, no mods are needed to handle inverted or non-inverted telemetry. On ersky9x, just set the option in the telemetry menu. At the moment the only support for MavLink telemetry in ersky9x is via an Arduino that converts the mavLi...
by pyr8
Fri Jul 01, 2016 4:32 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Re: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

P.S., MikeB, is it possible to add the modified code to the regular releases of OpenLRS and or ERSKY9X?
by pyr8
Fri Jul 01, 2016 4:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!
Replies: 56
Views: 36241

Mavlink Telemetry on 9XR Pro Apparently Works - But Need Some Clarification!

I have been trying to figure out how to get Mavlink Telemetry working on the "9XR Pro" for some time now. I managed to track down the gentleman that posted photos of it working on Google+: https://goo.gl/Dd54sT I have not tested it yet, however, apparently you need a modified branch of ope...
by pyr8
Sun May 29, 2016 9:14 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?

Set up a logcial switch with your condition, then use that to trigger a "play track" special function. Ah ha...that's what I was looking for! Now what should the "FUNC" Setting be in "Logical Switches"? Is there a list of the meanings of the different options? Found my...
by pyr8
Sun May 29, 2016 7:29 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?

Kilrah wrote:Set up a logcial switch with your condition, then use that to trigger a "play track" special function.
Ah ha...that's what I was looking for!

Now what should the "FUNC" Setting be in "Logical Switches"? Is there a list of the meanings of the different options?
by pyr8
Sun May 29, 2016 7:10 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?

Is there a decent write-up or video on how to set voice triggers on the 9XR Pro running OpenTX? I want to trigger a voice file on low battery and RSSI from FrSky Telemetry. I watched João video here: https://www.youtube.com/watch?v=6WRosEfIqC0&index=12&list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9...
by pyr8
Fri May 27, 2016 9:41 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?

MikeB wrote:You should get a voice warning from openTx when the RSSI values drops low.

Mike.
What about when the RX is completely un-powered or out of range...and...is the extent of the signal strenght warnings voice, or can I have the radio beep as well like with the "Orange LRS"?

Thanks Mike!
by pyr8
Fri May 27, 2016 8:18 pm
Forum: Turnigy 9XR PRO radio
Topic: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Replies: 10
Views: 8541

How do I setup FrSky XJT with 9XR Pro Running OpenTx?

I have a XJT bound to a XSR with my 9XR Pro...no issues binding. With my old TX/RX combo (Orange LRS), when the radio TX was on and lost signal with the RX, the TX module would give a warning tone...same when the RX/TX were about to go out of range of each other. How do I setup the 9XR Pro and XJT c...
by pyr8
Wed May 18, 2016 6:46 am
Forum: Turnigy 9XR PRO radio
Topic: No Splash Screen or Throttle Warning
Replies: 48
Views: 29887

Re: No Splash Screen or Throttle Warning

R12 replacement did it for me as well...thank God I found this post! :)
by pyr8
Wed May 18, 2016 6:45 am
Forum: Turnigy 9XR PRO radio
Topic: Unbrick 9XR Pro after reseting Atmel chip - How ????
Replies: 31
Views: 19596

Re: Unbrick 9XR Pro after reseting Atmel chip - How ????

UPDATE (SOLVED) "I think": There were 2 issues... 1st was a faulty power switch...I believe it was the soldering on the wires as there was too much resistance on the bottom set of wires. I re-soldered and cut-back all the leads re-tin'd them and that seems to have solved the switch issue. ...
by pyr8
Wed May 18, 2016 3:25 am
Forum: Turnigy 9XR PRO radio
Topic: Unbrick 9XR Pro after reseting Atmel chip - How ????
Replies: 31
Views: 19596

Re: Unbrick 9XR Pro after reseting Atmel chip - How ????

You said that before you needed to make pressure on the switch for the radio to turn OFF. That is not normal. So maybe measure the switch with your multimeter to make sure the switch is OK. The center pins of the switch should connect to the outer pins of the side you move the switch to. If you mov...
by pyr8
Tue May 17, 2016 8:17 pm
Forum: Turnigy 9XR PRO radio
Topic: Unbrick 9XR Pro after reseting Atmel chip - How ????
Replies: 31
Views: 19596

Re: Unbrick 9XR Pro after reseting Atmel chip - How ????

jhsa wrote:Did you measure the switch with a multimeter? It could also be a bad connection on one of the connectors.

João

What am I looking for exactly?

Go to advanced search