openrcforums

yeah, sorry to mention, but its a Sky9x Rev3 board with Frsky DJT. Thanks a lot for your clarification. was just confused about the two different schemes with numbered waves for one cpu platform, named for others and some of them working only on the taranis. well, i would love to see that kind of wa...

hmm, i am still puzzled with system sounds and alerts on my 9x with r2491. i can play sounds that i configure in custom functions, all fine there. however i still cannot manage to get proper file played for rssi low, battery alarm etc. I placed eg. rssi_org.wav, rssi_red.wav and some others under SO...

hmm, i am still puzzled with system sounds and alerts on my 9x with r2413. i can play sounds that i configure in custom functions, all fine there. however i still cannot manage to get proper file played for rssi low, battery alarm etc. I placed eg. rssi_org.wav, rssi_red.wav and some others under SO...

I like the AUTOSOURCE feature. makes Tx-setup much more intuitive and easy.

thanks a lot for that!

I assume this will work on any mega2560 control board? that would be great, no need for frysky sensors any more on quads or drones. ;) It works only with APM and MPNG, since it has only be implemented there. I personally prefer the use of a dedicated Arduino Pro Mini because it works on both APM an...

i think I read somewhere on rcgroups.com a transistor is enough for that on the MPNG...

This solution provides Telemetry data in Frsky format through Frsky telemetry channel. You cannot replace 3dr radio with that. Reason is the limited speed (baud rate) and the fact Frsky protocol is used not Mavlink. 2 way is possible, but I don't know whats the use for it yet on frsky. probably rese...

hmm, looks pretty the same (apart from your cool airbrush) I can just see a different timestamp. not sure, if the timestamp shows when the image was built, or when it was flashed. however, strange. you have the same version I have, both Sky9x Ver 3.0 boards with RTC battery equipped, but does not wo...

@Scott: sure, the time shown here is the build timestamp of open9x.
The picture was just ment to compare my version information with your's that's seems to work fine.
Can you please post your version info?

thanks,
christian

This is, how it looks on my 9x and I cannot get the clock working properly any hint someone?

thanks a lot,
christian

scott, haha, sounds interesting. i just took my 9x apart and checked, but the battery is fine on mine. it shows 3V. however, which software and version are you using that shows to be working?

thanks a lot!
christian

I agree, real human voice sounds much more real, although I am really amazed about the great quality of AT&T's text-to-speech engine. The advantage on synthetic voice is that everyone can easily extend, modify, replace, adapt certain samples to his personal requirements while maintaining a consi...

since I am so happy with my Sky9x V3.0 I have a christmas present to all Sky9x-users that run Open9x on their board:
viewtopic.php?f=45&t=2403

best regards from Vienna,
Christian

Hi! I spent some time to create high quality 16kHz mono voice files in Open9x structure. Tested on my Sky9x V3.0 they sound a way better than the original Open9x voice files. As I am flying Arducopter and MegaPirateNG I added also a few special voice prompts that might be useful for others. E.g. loi...

hey nsf!

cool to know you got yours working!
Now the real party starts, I am sure you will enjoy it same like me and all the others!!!

greetings from vienna,
christian

cool, good to know. thanks a lot!

anyone who has RTC working with sky9x v3 on Open9x?

Can someone, with open9x working on the v3 board, point me to the right place were to get the files (open9x, sam-ba libraries, Tinyapp, and all needed to flash sky9x. I just want to discard all possibilities. I am successfully using Open9x on my sky9x v3.0 and Optrex. I was using Companion9x and SA...

I can confirm that too.
Current measurment works fine again.
Unfortunatly RTC still does not work for me on the sky9x v3 board...

best regards,
christian

hmmmm, Current/Consumption is not working anymore on my Sky9x V3.0
unfortunatly RTC is still not fixed on that version as well...

ok, I created now a bunch more CS looking as follows: CS1: v<ofs -60 CS2: CSA and CSB CS3: CSC and CSD CS4: CSE and CSF CS5: CSG and CSH CS6: v>ofs 45 CSA: v<ofs -30 CSB: v>ofs -60 CSC: v<ofs 0 CSD: v>ofs -30 CSE: v<ofs 15 CSF: v>ofs 0 CSG: v<ofs 40 CSH: v>ofs 15 doing this way I get now exactly onl...

thanks a lot. now i can successfully connect with USB/serial to my 9x even after flashing. This was not working with an earlier version (bootloader issue).

greetings,
christian

the most easiest would be to have in addition to names also audio files assigned for each flight mode. the custom switches i did with the v>ofs function and check against the value of my 6 pos-rotary switch. lets assume following ranges: -100 to -60: flight mode 1 -59 to -20: flight mode 2 -19 to 0:...

I also got this working with Open9x on my sky9x board. The display shows now all flight modes, but I still struggle with the voice prompts for each flight mode. As I am flying FPV I would like to have an acoustic announcement for stabilize, position hold, alt hold, return to launch, landing, etc... ...

ok, thanks for the info.
I will wait then for the next official build. it might fix then the RTC issue as well.
If it does not, I will give ersky9x a try just to see if my hardware is OK...

arnaudmz wrote:My clock is OK with a CR2032, it has been giving me the correct time for 2 days now.

are you talking about ersky or Open9x?
If Open9x could you please provide me the information found on the version screen of Open9x incl. the Coprocessor details?

thanks a lot!
Christian

Open9x works on my sky9x v3.0, but be sure to use SAM-BA2.11 not 2.12.
Also, after flashing you will loose USB/serial connection with the current Open9x version. This is going to be fixed soon as far as I understood.

concerning coproc: when I check the version page on open9x it gives me among other information:

SVN: open9x-r1692
Copr: 4

not sure, what "Copr: 4" actually means...

did not try since after flashing open9x my USB/serial would not work until I use the erase jumper which makes things a bit annoying. Maybe I should have waited a while before moving to open9x. I just don't want to reprogram my models lateron. Does maybe anyone else use a RTC battery on ersky9x with ...

i just inserted a CR2032 battery into the battery holder of the sky9x v3, but unfortunatly the date/time always starts again and again from the time I set on my 9x when I power on the Transmitter.
I am using open9x for sky9x. Anyone else having this? is this an issue of open9x or the hardware?