Search found 110 matches

by SR71
Tue Jun 05, 2018 5:29 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Use sticks not for servo position but for servo speed
Replies: 27
Views: 11194

Re: Use sticks not for servo position but for servo speed

Thank you very much, I have a very very limited space in my models. Normally I use planetary gear motors for almost all the movements I need, but this motors are very expensive and requires an extra ESC for motor(more space). Many times a cheap micro servo can do the work, but my problem is control...
by SR71
Thu Dec 14, 2017 6:25 pm
Forum: RF MODULES
Topic: Witch tx module for 9x r pro and 9x8cv2 Rx
Replies: 5
Views: 1418

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

I have just that module in my Taranis 9D with OpenTX. 2.4G CC2500 NRF24L01 A7105 CTRF6936 4-IN-1 Multi-protocol STM32 TX Module With Antenna selecting protocol 1 (the only marked as "FLYSKY") I am not able to bind the receiver 9x8Cv2. In OpenTX I selected ExtRF Module : PPM Channel Range: CH1-8 PPM ...
by SR71
Sun Dec 03, 2017 10:02 pm
Forum: FRSky Horus radio
Topic: Horus X12S internal RF module firmware update
Replies: 5
Views: 1584

Re: Horus X12S internal RF module firmware update

Just as a point of interest, why would you want to update the RF module?? I too have the Horus, OpenTX2.2 on board. All works well - what is missing?? Nothing is missing AFAIK. As I received past week a new Horus from the Italian FrSky reseller (and I too switched it to OpenTx 2.2), I was asking fo...
by SR71
Sun Dec 03, 2017 9:00 pm
Forum: FRSky Horus radio
Topic: Horus X12S internal RF module firmware update
Replies: 5
Views: 1584

Re: Horus X12S internal RF module firmware update

Understood.
Many thanks for the info (as usual).
by SR71
Fri Dec 01, 2017 9:17 am
Forum: FRSky Horus radio
Topic: Horus X12S internal RF module firmware update
Replies: 5
Views: 1584

Horus X12S internal RF module firmware update

I just received a new X12S and updated it to OpenTX 2.2.0.

Is it possible to update the internal RF module firmware from OpenTx ?

If not, how have I to proceed ?

TIA for the help.
by SR71
Sun Dec 25, 2016 10:52 pm
Forum: 9Xtreme upgrade board
Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
Replies: 182
Views: 43942

Re: Problem with last new Hobbyking Turnigy 9X transmiters.

So, has the original supposed problem been dismissed ?
by SR71
Sat Nov 19, 2016 11:14 pm
Forum: openTx
Topic: Documentation for OpenTX 2.2 Taranis and Horus
Replies: 84
Views: 86112

Re: Documentation for OpenTX 2.1 and Taranis

Could someone kindly provide a pointer to the up to date pdf ?
Are the ones in the first page of this thread the most recent ?
by SR71
Sun Jan 24, 2016 8:49 am
Forum: Electronic Mods
Topic: FrSky telemetry sharing the ribbon with USBASP?
Replies: 7
Views: 3684

Re: RE: FrSky telemetry sharing the ribbon with USBASP?

Best looking mod ever seen !
Which kind of wire is the blue one ?
by SR71
Sat Jan 09, 2016 1:32 pm
Forum: General Information & Rules
Topic: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)
Replies: 173
Views: 50479

Re: FAA Unmanned Aircraft Systems Registration 2015

I will fly below 400 feet I will fly within visual line of sight I will be aware of FAA airspace requirements: http://www.faa.gov/go/uastfr I will not fly directly over people I will not fly over stadiums and sports events I will not fly near emergency response efforts such as fires I will not fly ...
by SR71
Thu Dec 10, 2015 5:56 am
Forum: General Information & Rules
Topic: Forum Upgrade
Replies: 98
Views: 28566

Re: RE: Re: Forum Upgrade

Aha, the morons... I'm set to autoupdate, so there shouldn't have been a version issue... except I have Tapatalk Pro which I bought some time ago, and it seems they've stopped updating it in favor of the "normal" Tapatalk with in-app purchase, which means I'd have to buy it again if I switched. See...
by SR71
Wed Dec 09, 2015 8:39 pm
Forum: General Information & Rules
Topic: Forum Upgrade
Replies: 98
Views: 28566

Re: RE: Re: Forum Upgrade

SR71 wrote:Maybe is there now in place some limitation about the minimum level of Tapatalk app version ?
Mine is 4.6.2.
It seems so: I installed the release 5.3 and finally managed to reconnect.
Apparently the new forums software is not back compatible with tapatalk 4.

Sent from my GT-P3110 using Tapatalk
by SR71
Wed Dec 09, 2015 9:18 am
Forum: General Information & Rules
Topic: Forum Upgrade
Replies: 98
Views: 28566

Re: Forum Upgrade

Maybe is there now in place some limitation about the minimum level of Tapatalk app version ?
Mine is 4.6.2.
by SR71
Tue Dec 08, 2015 10:43 pm
Forum: General Information & Rules
Topic: Forum Upgrade
Replies: 98
Views: 28566

Re: Forum Upgrade

Trying to connect with Tapatalk, it stays on

Connecting to server...

Forever.
I scratched the connection and added again, but no joy.
Some suggestion ? (Other connections I have work as usual)
by SR71
Thu Sep 03, 2015 5:05 pm
Forum: General help (FrSky Taranis radio)
Topic: Threaded inserts
Replies: 8
Views: 1138

Re: Threaded inserts

Koarl wrote:Do you think the plastic is riggid enough for the helicoil? I only know this stuff from repairing threads in cast iron. For example at motorbike engines.
Once I put one into a small piece of derlin, but in the end probably it depends on the particular stiffnes of part.
by SR71
Wed Sep 02, 2015 6:54 pm
Forum: General help (FrSky Taranis radio)
Topic: Threaded inserts
Replies: 8
Views: 1138

Re: Threaded inserts

tilmanb wrote:No, that is a different thing.
What I want are little metal bushings with fine thread on the inside and some kind of self cutting thread on the outside.

I can get the smooth threaded inserts in, but I would have to glue them I guess.
Google for

Helicoil



Sent from my GT-P3110 using Tapatalk
by SR71
Wed Aug 05, 2015 10:41 am
Forum: Hardware
Topic: X9E Fader S1 S2 in the mid to short
Replies: 1
Views: 605

Re: X9E Fader S1 S2 in the mid to short

Hy, X9E Fader/Slider S1, S2 in the mid are to short and at about 80% of the too short way they have their max Value thats a big miss! Compare with the fader at a Graupner that what we need as a Fader! Maybe it is referring the same problem you are experiencing: X9E Faders S1,S2 - Crosstalk and Dead...
by SR71
Sun Jul 12, 2015 7:43 pm
Forum: General help (FrSky Taranis radio)
Topic: taranis wont turn on
Replies: 104
Views: 31417

Re: taranis wont turn on

sos13 wrote:I FIXED IT MYSELF - seems strange that no one here offered any type of solution
Wrong firmware ?
by SR71
Thu Jun 04, 2015 10:38 pm
Forum: FrSky Taranis radio
Topic: FrSky 2015 firmware update
Replies: 67
Views: 24514

Re: FrSky 2015 firmware update

Hello guys It's my first post at OpenRC, with a question to somebody who can help me with my X8R who is gone bad during Updating the firmware. All was going well until the Downloadprocess ended at ca. 60%. The computer was running well only the process was frozen. http://openrcforums.com/forum/view...
by SR71
Sat May 30, 2015 10:57 pm
Forum: The Pickled Gnu (The Pub)
Topic: It's not "IF". The question is "WHEN and WHERE"
Replies: 43
Views: 7136

Re: It's not "IF". The question is "WHEN and WHERE"

No, but if you get away with a bank robbery you get rich :D Now , is it really worth risking a long time in jail for flying a stupid model in a place where you can kill innocent people?? Nowadays the wealth is not measured anymore only with money, a ticking youtube counter is considered more import...
by SR71
Sat May 30, 2015 9:18 pm
Forum: The Pickled Gnu (The Pub)
Topic: It's not "IF". The question is "WHEN and WHERE"
Replies: 43
Views: 7136

Re: It's not "IF". The question is "WHEN and WHERE"

jhsa wrote:Well, it will stop them if they have to spend 10 or 15 years in jail if caught flying in places like that..
This applies even to bank robbery... did that stopped ?
by SR71
Sat May 16, 2015 10:44 pm
Forum: er9x
Topic: er9x development
Replies: 3106
Views: 358089

Re: er9x development

jhsa wrote: With the new Core9x board coming,
What is Core9x ?

Sent from my GT-P3110 using Tapatalk
by SR71
Sat Apr 11, 2015 6:36 pm
Forum: General RC Electronic Projects and Discussion
Topic: Arduino based S-Bus decoder with CPPM and Servo
Replies: 57
Views: 33172

Re: Arduino based S-Bus decoder with CPPM and Servo

Hi all, I attempted to load the code kindly provided by mstrens on my Arduino chipKit Max64; alas, due to a totally different architecture of that system (it is PIC based), it is unfeasible compile the code there. So, wandering around, I discovered a platform independent code (already mentioned here...
by SR71
Sun Jan 25, 2015 6:50 pm
Forum: Other Radios
Topic: Plantraco HFX 900 module
Replies: 1
Views: 1971

Plantraco HFX 900 module

Did someone try to connect/integrate the HFX900 module ? http://www.microflight.com/Online-Catalog/Radio-Systems/Monolith-Buddy-Box-Transmitter ? They state that this module is compatible with Futaba and Hitec. The connections are documented here: http://www.microflight.com/pdf/Monolith_Instructions...
by SR71
Wed Jan 21, 2015 1:36 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 69555

Re: Search for Replacement 9x Potentiometers!

Not for the 9x I'm afraid? it works with 3.3V and the atmega voltage reference is 5V? Also i2c could work but according to Mike it might be difficult to implement on the 9x due to the reduced available flash on the m64 chip.. And it is quite expensive in my opinion ;) João There are cheaper models ...
by SR71
Sat Aug 16, 2014 11:11 pm
Forum: Software
Topic: Opentx ver: 2.0.8
Replies: 13
Views: 2543

Re: Opentx ver: 2.0.8

Kilrah wrote: As far as documentation goes, the official manual for OpenTX is here: https://docs.google.com/document/d/1qlh ... -PJA81rDJQ
Is a revised manual for OpenTx 2.x planned ?
by SR71
Fri Aug 15, 2014 6:56 am
Forum: FRSky Horus radio
Topic: FrSky Tx (X12D)
Replies: 263
Views: 83379

Re: FrSky Tx (X12D)

If a simple interface for the masses means that I get better hardware for less money then I'm all for it. That is exactly the point! FrSky is not going to grow (or survive) if they limit target audience to the tiny minority of the hobbyists that are DIY savvy. I agree and there are several option t...
by SR71
Thu Jul 03, 2014 6:54 pm
Forum: openTx model setup
Topic: F3J / TD sailplane setup for Taranis
Replies: 2
Views: 1809

Re: F3J / TD sailplane setup for Taranis

For sport / competition F3J / Thermal Duration sailplanes. Comprehensive mixing for 6 servos In-flight adjustment of key parameters, for rapid trimming Compatible with both OpenTx version 2 and "classic" Step-by-step instructions More info and download: here http://rc-soar.com/files/F3J-IMGP6581.jp...
by SR71
Sun Jun 08, 2014 11:27 pm
Forum: openTx
Topic: OpenTX 2.0.0
Replies: 300
Views: 76236

Re: OpenTX 2.0.0

Just compiled companion on linux 64 bit. Works a treat when launched from the lbuild folder. I've run make install but if I try staring companion I get a No such file or directory message as below. [email protected]:~$ companion bash: /usr/local/bin/companion: No such file or director...
by SR71
Fri Jun 06, 2014 9:24 pm
Forum: companion9x
Topic: C 2.01: why is the throttle trim behaviour different ?
Replies: 1
Views: 744

C 2.01: why is the throttle trim behaviour different ?

Busy in OpenTx 2.0 conversion process, I noticed a weird difference. In an old model, in order to achieve a trim range between 0 -50, I created the following mix (C 1.52): CH10 TrmT Weight(+25%) Offset(100%) that returns a 0 - 50 output on the whole trim range. Loading the same file in C2.0.1 the Mi...

Go to advanced search