Search found 16810 matches

by MikeB
Sat Mar 02, 2024 4:56 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro er9x updates
Replies: 2
Views: 252

Re: 9XR Pro er9x updates

Yes you may update to r226. I have always been careful to make sure new revisions do not change the existing radio and model settings, so you should be able to just do the update. It is always a good idea whenever updating to make a copy of the the existing firmware and settings so you may go back t...
by MikeB
Mon Feb 19, 2024 10:31 am
Forum: Where to buy / Spares / Modules? Selling up?
Topic: Anyone have any experience with the Detrum 8CH simulator controller?
Replies: 1
Views: 333

Re: Anyone have any experience with the Detrum 8CH simulator controller?

I've no idea about that device, but many radios running open source firmware (erskyTx, openTx, edgeTx) support joystick operation via USB to enable them to operate as a controller to sims, perhaps that would meet your needs.

Mike
by MikeB
Sat Feb 17, 2024 9:16 pm
Forum: er9x
Topic: downloads er9x.com
Replies: 4
Views: 345

Re: downloads er9x.com

All working OK for me.
On 21 Jan 2024 the site was changed from http (insecure) to https (secure).

Mike
by MikeB
Mon Feb 12, 2024 2:32 pm
Forum: FrSky Taranis radio
Topic: Newbie question
Replies: 10
Views: 1048

Re: Newbie question

1. Start your Tx in bootloader mode. 2. Connect your Tx to your PC using the USB connection. 3. Run companion and read the EEPROM from your Tx. 4. Open the 32K, .bin file in companion, you should now have 2 windows open in companion with models listed in each. 5. Drag and drop any required models fr...
by MikeB
Sun Feb 11, 2024 11:06 pm
Forum: FrSky Taranis radio
Topic: Newbie question
Replies: 10
Views: 1048

Re: Newbie question

When you have companion installed, there is a good chance you will be able to read that .bin file into it, then be able to transfer model(s) to your Tx.
Let us know when you have companion installed.

Mike
by MikeB
Sun Feb 11, 2024 7:31 pm
Forum: FrSky Taranis radio
Topic: Newbie question
Replies: 10
Views: 1048

Re: Newbie question

What is the size of the bin file, if 32K, it is an EEPROM file.
Do you have companion on your PC?

Mike
by MikeB
Sun Feb 11, 2024 7:25 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2347
Views: 1333302

Re: ERSKYTx (was ersky9x) Questions

This is very odd. I've compared the two, ersky9xr_rom.bin files (r225 and r226) and the only differences are in the version text and two places containing the fix for the script not running. So the executable code for everything else, like binding, is exactly the same, the files are exactly the same...
by MikeB
Sun Feb 11, 2024 4:58 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2347
Views: 1333302

Re: ERSKYTx (was ersky9x) Questions

Do you know what version you had before you flashed r225?
Did r225 bind OK?

Mike
by MikeB
Sun Feb 11, 2024 3:52 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2347
Views: 1333302

Re: ERSKYTx (was ersky9x) Questions

I've released r226 that should fix the problem.

Mike
by MikeB
Tue Jan 30, 2024 3:25 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1957431

Re: ERSKY9X Coding

There was a problem with handling some multiple mixes, this is now fixed and r225 is now released. eepskye also updated for the same reason.

Mike
by MikeB
Tue Jan 30, 2024 3:24 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx Test Versions
Replies: 141
Views: 294161

Re: ErskyTx Test Versions

I've updated to rev 225 with this fixed, eepskye also updated to fix the same problem and another bug where switches were not displayed correctly in the mix editor.

Mike
by MikeB
Thu Jan 25, 2024 10:59 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1957431

Re: ERSKY9X Coding

There was a problem on the 9XR-PRO running BASIC scripts. This is now fixed and the file on er9x.com is updated (and reports the revision as 224a).

Mike
by MikeB
Mon Jan 22, 2024 9:55 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1957431

Re: ERSKY9X Coding

erskyTx r224 is now released!!! It has been a long time as I've been working on the UNI accst firmware for older FrSky receivers. www.er9x.com has now changed to https (secure) instead of http. This means the existing eepe and eepskye no longer connect. A release install file (rev 424) of these is n...
by MikeB
Sat Jan 06, 2024 2:34 pm
Forum: openTx
Topic: Troubles with ARCHER PLUS GR8
Replies: 3
Views: 2298

Re: Troubles with ARCHER PLUS GR8

See here: https://openrcforums.com/forum/viewtopic.php?p=157368#p157368 I don't have a X9DE 2019 of any type, but I've been told the version posted there runs on a X9D 2019. Whether this allows the OTA update I don't know, but at least it recognises the "plus" receivers. As usual, before u...
by MikeB
Sun Dec 24, 2023 7:51 pm
Forum: ersky9xr
Topic: Does ELRS module work fully with 9xr pro?
Replies: 10
Views: 4525

Re: Does ELRS module work fully with 9xr pro?

Please start by trying the ELRSv2 script. I don't use ELRS, but I understand ELRS sends required options to the script that then just displays it.

Mike
by MikeB
Sat Dec 16, 2023 6:51 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: Turnigy 9x trim buttons
Replies: 2
Views: 8260

Re: Turnigy 9x trim buttons

I've had a small number of (similar) trim rockers break on other radios. I've repaired them by gluing the broken pieces back on and adding triangular reinforcements above the pieces. These were made from polystyrene card (40 thou thick) and also glued in place. These have then worked OK.

Mike
by MikeB
Fri Dec 01, 2023 3:34 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

With the X6R and the multi module, the voltage from that pin is sent as RxV and not A1. On er9x, due to lack of RAM, this means there is no scaling for RxV, as there is for A1. What is possible is to use a Scaler to obtain the correct value. Scalers are in the GlobalVars menu of the model. In that m...
by MikeB
Thu Nov 30, 2023 11:52 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Check the operation of the A1 input by putting the jumper back in (on the two pins closest to the antennae), and check a1 is then the receiver voltage. Check the connections, as I understand it the pin closest to the servo pins is ground, the middle pin is the Rx voltage divided by 4 and the pin clo...
by MikeB
Thu Nov 30, 2023 7:00 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Without the voice addition, you just have beeps.It's a long time since I had a 9X without the voice addition but I think if you set the sound mode to "PiSpkr" in the General|Audio menu, then set up a voice alert in the model you are able to get different responses. As a test, set a voice a...
by MikeB
Thu Nov 30, 2023 12:44 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

I removed that feature from the '64 version to make space for other things. The '64 version only has 18 bytes of flash space left and this feature uses 166 bytes of flash. Over a long time I've made the code use less space, while keeping the same functionality, so there is now little scope to shrink...
by MikeB
Wed Nov 29, 2023 6:57 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Which item(s), exactly, are missing in the mixes menu?

Mike
by MikeB
Wed Nov 22, 2023 4:23 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Yes. But if both AIL and GEA appear to operate together when you change the GEA switch, then it strongly suggests the two signals at the processor pins are connected together.

Mike
by MikeB
Wed Nov 22, 2023 12:28 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

I suggest checking the mod, particularly the two wires soldered to the processor pins. It is likely there is a short there.

Mike
by MikeB
Tue Nov 21, 2023 4:25 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Another test version posted, I found edgeTx had changed to a different calculation that was easier to copy to the 'M128.

Mike
by MikeB
Mon Nov 20, 2023 5:24 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

It may take a few days to sort out what the calculation is doing.

Mike
by MikeB
Mon Nov 20, 2023 3:05 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

T1 is temperature from the altitude sensor.
TmOK is Telemetry OK, indicates telemetry is being received.

Mike
by MikeB
Mon Nov 20, 2023 12:40 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

I'll see if I can simplify the altitude calculation, I just copied the code from erskyTx that was copied from somewhere else!
Do you get a sensible value for TEMP1 with the sensor plugged in?

Mike
by MikeB
Sun Nov 19, 2023 3:42 pm
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

The backlight is flashing because the Tx battery voltage is being reported as too low. I may have a buffer overflow, the MPM telemetry for AFHDS2A is longer than I have configured. RAM is limited on the ATMEGA devices so everything has to be kept as small as possible. There may also be a problem wit...
by MikeB
Sat Nov 18, 2023 11:43 am
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

New test version posted!
The code now matches that for erskyTx when processing AFHDS2A telemetry.

Mike
by MikeB
Sat Nov 18, 2023 9:43 am
Forum: er9x
Topic: er9x and multi-protocol telemetry mod
Replies: 131
Views: 343739

Re: er9x and multi-protocol telemetry mod

Is the Altimeter now working as well?
You say you set the option to "Rate 50", for AFHDS2A telemetry you need it as "T-Rate 50".

Mike

Go to advanced search