Search found 16911 matches
- Mon Feb 03, 2025 11:54 am
- Forum: General help (FrSky Taranis radio)
- Topic: X8R Fail Safe activation and deactivation
- Replies: 5
- Views: 6643
Re: X8R Fail Safe activation and deactivation
If you have FrSky firmware on the X8R, then there is no way of finding out what version you have. FrSky firmware is here: https://www.frsky-rc.com/x8r/ . You might consider flashing UNI firmware (found here: https://forum.alofthobbies.com/index.php?threads/uni-receiver-firmware-release-files-univers...
- Tue Jan 28, 2025 3:21 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
It looks like my change to the BASIC script handling to allow larger arrays is working OK. This should allow the ElrsV2.BAS to work with elrs 3.5 firmware.
Mike
Mike
- Mon Jan 27, 2025 3:21 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
Yes, that is correct. ErskyTx for the AR9X board checks the processor ID and then make use of the extra RAM. Small LUA scripts may be run already. The problem with ELRS 3.5 is likely the number of possible packet rates has increased and the text for all the options doesn't fit in the available array...
- Sat Jan 25, 2025 12:16 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
IanF9X: I'll see if I can find out what is going wrong!
Mike
Mike
- Sat Jan 25, 2025 12:15 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
. . .Will this tests version and ELRSV3.lua also will work on AR9X? Thank you The AR9X doesn't have enough spare RAM to be able to run anything but small LUA scripts (unless like me you have changed the processor to a '486 that has 128k RAM instead of 64k RAM !). If you could detail what is not wor...
- Wed Jan 15, 2025 3:33 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
It may be I still have some missing functions in the implementation of LUA.
If you can post what the script errors are I can look into them.
Mike
If you can post what the script errors are I can look into them.
Mike
- Wed Jan 08, 2025 12:00 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
I've just posted another test version. Hopefully this will fix not being able to select items when running the script.
Mike
Mike
- Tue Jan 07, 2025 6:44 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
I've posted a test version of erskyTx for the 9Xtreme that runs the elrsV3.lua script. The only ELRS module I have is a "lite" version so I tested the script operation on a FrSky X9Lite. The only problem is some of the text doesn't fit the screen well, the script has been written expecting...
- Mon Jan 06, 2025 8:07 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
I'm working on getting erskyTx to handle this script. I think I've added 3 missing functions, but now a 4th one has shown up, so I need to sort this one! Mike Edit: I've sorted the last, missing function, and the script is now running, however, the display is flickering so the script is not (yet) us...
- Sun Jan 05, 2025 4:54 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
The elrsv3.lua file is too large for the 9Xtreme. It is also now using some "built in" functions that are not available in erskyTx at present. I'll see if I can make some more memory available, and also look into adding the missing functions. I've also attached a .zip file that contains th...
- Sun Jan 05, 2025 2:46 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2374
- Views: 1508283
Re: ERSKYTx (was ersky9x) Questions
The post above should refer to a ".BAS" file not a ".BAT" file. The 9Xtreme does include support for LUA scripts as well as BAS scripts. You have to select which to use in the MODEL SETUP|GENERAL menu (near the bottom of the menu). I think the module is updated using WiFi, and th...
- Wed Dec 18, 2024 4:38 pm
- Forum: openTx
- Topic: Special fixes
- Replies: 17
- Views: 16093
Re: Special fixes
Seems I was only missing one thing, so I have managed to do a build, posted on the first post.
I have no way of testing it (I've only got a XLite not a 'S' or PRO), so make sure everything is fully backed up before using it.
Mike
I have no way of testing it (I've only got a XLite not a 'S' or PRO), so make sure everything is fully backed up before using it.
Mike
- Wed Dec 18, 2024 4:01 pm
- Forum: openTx
- Topic: Special fixes
- Replies: 17
- Views: 16093
Re: Special fixes
I've just changed my computer system to a new one. As this only has 256Mb solid state drive C, compared to the 1Tb hard drive I used to use, I have added a 500Mb hard drive as drive D, where I have the openTx files. I also haven't got all the tools I use fully installed and configured. I tried to do...
- Sun Nov 03, 2024 1:15 pm
- Forum: Hardware Mods
- Topic: Add 3 pos switches to plain 9x.
- Replies: 35
- Views: 27368
Re: Add 3 pos switches to plain 9x.
I've just posted an update to eepe (just the .exe, built with QT5). Copy this to your existing eepe directory (rename the existing eepe.exe first in case there are any problems and you need to revert). This removes the default switches in the general edit and handles added, 3-pos switches in the mod...
- Sat Nov 02, 2024 7:09 pm
- Forum: Hardware
- Topic: FRSKY X9D 2019 receiver recommendation
- Replies: 1
- Views: 2193
Re: FRSKY X9D 2019 receiver recommendation
The X9D 2019 uses ACCESS protocol by default. You may change this to D16 to bind the older receivers (like the X6R), bu the 2019 version uses V2 protocol. You need to make sure the X6R is running V2 firmware as well (or better use UNI firmware that binds to any D16 protocol). You also need to check ...
- Sat Nov 02, 2024 7:06 pm
- Forum: Hardware Mods
- Topic: Add 3 pos switches to plain 9x.
- Replies: 35
- Views: 27368
Re: Add 3 pos switches to plain 9x.
I'm working on this. Default switches should not be on that screen, they have been model specific for a long time.
Mike
Mike
- Fri Nov 01, 2024 9:27 pm
- Forum: Hardware Mods
- Topic: Add 3 pos switches to plain 9x.
- Replies: 35
- Views: 27368
Re: Add 3 pos switches to plain 9x.
By displaying the splash screen half size (the image was half size but I scaled it up for display) I've saved enough flash to fix the 3-pos switch problem. Some of the '64 versions have a limited hardware menu (e.g. serial voice) that doesn't support setting the additional 3-pos switches. I've poste...
- Fri Nov 01, 2024 5:04 pm
- Forum: Hardware Mods
- Topic: Add 3 pos switches to plain 9x.
- Replies: 35
- Views: 27368
Re: Add 3 pos switches to plain 9x.
I have re-produced your problem.
I can see the difference in the source code that explains why the '2561 version is OK. However, if I change the code so the '64 version would work, the firmware no longer fits in the flash!
I'll see if I can sort this, but the '64 flash is just full.
Mike
I can see the difference in the source code that explains why the '2561 version is OK. However, if I change the code so the '64 version would work, the firmware no longer fits in the flash!
I'll see if I can sort this, but the '64 flash is just full.
Mike
- Thu Oct 31, 2024 4:28 pm
- Forum: Hardware Mods
- Topic: Add 3 pos switches to plain 9x.
- Replies: 35
- Views: 27368
Re: Add 3 pos switches to plain 9x.
Just checking where you are looking.
In a mix, you may set the source to a switch, in this case it should appear as sAIL.
You may also configure a switch when the arrows and bar should appear. I just checked on my '2561 radio (running 822x) and it works correctly.
Mike
In a mix, you may set the source to a switch, in this case it should appear as sAIL.
You may also configure a switch when the arrows and bar should appear. I just checked on my '2561 radio (running 822x) and it works correctly.
Mike
- Thu Oct 31, 2024 4:11 pm
- Forum: er9x
- Topic: Smartieparts drivers
- Replies: 7
- Views: 5306
Re: Smartieparts drivers
I've never had a SP board so can't help directly.
Is it an original SP board, with the backlight driver, or the later, small board?
Mike
Is it an original SP board, with the backlight driver, or the later, small board?
Mike
- Fri Oct 25, 2024 6:31 pm
- Forum: er9x
- Topic: Smartieparts drivers
- Replies: 7
- Views: 5306
Re: Smartieparts drivers
I've dug out a USBASP! When I plug this in to my PC (Windows 10), I get the tones indicating a USB device is connected, do you get this? Looking in "Devices and Printers" I see a device "USBasp", do you see this? Right clicking on this and selecting "Properties" I go to...
- Fri Oct 25, 2024 5:25 pm
- Forum: er9x
- Topic: Smartieparts drivers
- Replies: 7
- Views: 5306
Re: Smartieparts drivers
The smartieparts programmer is just a USBASP programmer, so you just need to do a search for "USBASP drivers".
The 9Xtreme and the 9XR-PRO both use erskyTx (not er9x) and use built in drivers.
Mike
The 9Xtreme and the 9XR-PRO both use erskyTx (not er9x) and use built in drivers.
Mike
- Thu Oct 24, 2024 11:01 am
- Forum: FrSky Taranis radio
- Topic: Taranis Qx7 external RF telemetry problem
- Replies: 5
- Views: 3543
Re: Taranis Qx7 external RF telemetry problem
Telemetry from the 4-in-1 should work. I just checked in my QX7 (unmodified) and I see the 4-in-1 revision information so data is being received from the module. Binding to a FrSky Rx I also see RSSI and RxV so all is OK.
Mike
Mike
- Wed Oct 23, 2024 5:34 pm
- Forum: FrSky Taranis radio
- Topic: Taranis Qx7 external RF telemetry problem
- Replies: 5
- Views: 3543
Re: Taranis Qx7 external RF telemetry problem
In the QX7, the telemetry from the 4-in-1 does use the SPort signal. If the internal module is enabled, then this also uses the SPort signal, so the telemetry from the external module doesn't work.
Mike
Mike
- Wed Oct 02, 2024 4:10 pm
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 68
- Views: 55168
Re: KingRadio TX18S
That test version was posted in August, before your report!
Mike
Mike
- Sat Sep 28, 2024 12:22 pm
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 68
- Views: 55168
Re: KingRadio TX18S
I've changed the source files to fix these. However, the reason for the problem is the addition of VARS. These are an alternative to GVARS, but are MUCH more useful and very powerful. You may even use a VAR to set the value of a curve point. To change to using VARS, there is an option in the Model S...
- Mon Sep 16, 2024 12:07 pm
- Forum: Hardware
- Topic: Turnigy 9X Repair help - no screen.
- Replies: 3
- Views: 3957
Re: Turnigy 9X Repair help - no screen.
Yes, just use eepe and flash er9x-128.
Mike
Mike
- Sat Sep 14, 2024 8:15 pm
- Forum: Hardware
- Topic: Turnigy 9X Repair help - no screen.
- Replies: 3
- Views: 3957
Re: Turnigy 9X Repair help - no screen.
I does seem very likely that the processor is no longer working, odd that the flash reads/writes but the EEPROM does not.
Do you think you would be able to solder in a new processor?
Mike
Do you think you would be able to solder in a new processor?
Mike
- Sat Sep 14, 2024 8:08 pm
- Forum: Hardware
- Topic: Taranis X9D+ from 2014 RF Module Replacement
- Replies: 3
- Views: 2687
Re: Taranis X9D+ from 2014 RF Module Replacement
T9hobbysport in the UK are showing the X9D+ backboard with Tx module in stock. Perhaps check the antenna is still properly connected. There is a version of the openXsensor that runs on a RP2040 board, much more powerful that a Pro mini, see: https://www.rcgroups.com/forums/showthread.php?4130529-ope...
- Thu Aug 29, 2024 6:18 pm
- Forum: Hardware
- Topic: HELP, Adding 3pos switches to 9XR PRO
- Replies: 37
- Views: 30082
Re: HELP, Adding 3pos switches to 9XR PRO
For the Hardware menu, "Help" is accessed on the popup on the main screen. It does say power on holding the left horizontal trim to the left to enable the Hardware menu. Changing 2-pos switches to 3-pos switches, probably the easiest way is to wire the extra switch connection to the LCD co...