openrcforums

Hi guys,
What should I do in order to have voice for Gruvin9x V4.1 board with FrSky Telemetry and SD Card?
Could you please point me in the right direction?
Thank you!

Hi guys, I have Gruvin gruvin9x v4.1 PCB, SD Card and Programmer in my Turnigy 9x installed the speaker from the smartphone connected to the speaker connector. My question is: in order to use the firmware with voice do I need to rewire something or Gruvin Board already has all the hardware needed? T...

Thank you!
I will try immediately.

Works perfectly!!!

The sensor is FrSky and the wire is soldered to the 3s pad (the last one)

Hi,
I have a Gruvin9x board with FrSky telemetry.
Could somebody provide a web link or explain here please.
How to set:
Range
Offset
parameters for the 3 cell LiPo battery, as the voltage I see on the screen is too far from the reality.
Thank you!

Hi, As I understand to find the right sensor and to develop some hardware part is a long process but the summer is coming. One good start could be adding two more sink and rise sounds as alarms for those crazy people who is ready to buy ThermalScout. In the future you will use these sound anyway so ...

Hi team, 1) Why don't we use the combination of results from 3 sensors as GPS, vario and 3way axis? (I guess too much math on TX side but for the custom board should be fine) 2) Somehow these guys http://wingedshadow.com/thermalscout.html managed to create what we need with just one sensor. If we ca...

Hi Bertrand,
Do you have any updates?
Thank you!

bertrand35 wrote:Hi,
Romolo and me are currently working on it in open9x. It will work on the stock board and on the v4.1 board.
Bertrand.

wouldn't better than have so many firmwares? Hi wallaguest1, I am totally agree with you but as I understand from information I've got here http://code.google.com/p/open9x/ this particular firmware has too many features to be combined with another one. Developers are running out of space to fit the...

Hi, Romolo and me are currently working on it in open9x. It will work on the stock board and on the v4.1 board. Bertrand. Sounds exciting!!! Where I can watch for updates, do you post your progress somewhere? Should I perform FrSky wiring and Speaker mod. or you gonna use different wiring? Thanks g...

Here is the famous board everyone is talking about
http://gruvin9x.com/shop/electronics/18 ... cb-ps.html

Hi all, I'm want to build a system that would be able to provide sensitive rise/sink tones from a sail plane on-board fr-sky variometer and on-board battery control/warning. I already have Turnigy 9x controller ER9x flashed. Also I ordered FrSky telemetry transmitter/receiver, FrSky hub, variometer,...

The absence of mixers caused this issue. Problem has been solved after I added Simple 4Ch mixes. Firmware version (I think) is indicated here SVN: er9x--r708 This new firmware is really powerful, but requires basic structure and functioning knowledge plus patience. Thank you very much!!! Problem sol...

Found it!
Some time is required to get used to the new interface.
The forum says The extension bin is not allowed.
Here is my eeprom file, I changed the extension bin -> zip

Sorry for silly question, but how can I upload the file here?

I use Mode 2 so my THR is on channel 3 (I hope) it was always on CH3 before flashing.
Could you please guide me on how to extract/save required file.

Hi all, I just flashed my Turnigy TGY9X with ER9X firmware and calibrated all the sticks. After the TX and RX were powered up my ESC entered the throttle calibration mode, after I calibrate the ESC throttle and power it up, it enters into the calibration mode again (cycle loop). Seems the TX throttl...