Search found 190 matches

by Hexperience
Wed Jul 06, 2016 8:59 am
Forum: Hardware
Topic: Make your own Taranis three axis gimbal.
Replies: 1
Views: 2013

Re: Make your own Taranis three axis gimbal.

Cool! Curtis Youngblood flies his helis like that, with the rotational axis controlling the tail. No good for us thumb flyers but very very good to see stuff like this being produced.
by Hexperience
Tue Jun 21, 2016 9:25 am
Forum: openTx
Topic: Serial data over telemetry channel
Replies: 11
Views: 3584

Re: Serial data over telemetry channel

Interesting, 30 bytes per second is enough to make a change to a flight controller. If 2.2 adds some ablity to control that via lua scripts there might be something that can be done along those lines. (Pun intended )

Cheers
by Hexperience
Thu Jun 09, 2016 3:46 pm
Forum: openTx
Topic: Serial data over telemetry channel
Replies: 11
Views: 3584

Re: Serial data over telemetry channel

It's not that I have a problem I'm trying to solve or anything like that. I'm just looking to see if true 2-way serial communication is possible through the s.port, but it looks like serial only goes 1 way. The TX sends RC control data, and received Serial data, so we can't send serial data to a fli...
by Hexperience
Sun Apr 17, 2016 6:11 pm
Forum: openTx
Topic: Serial data over telemetry channel
Replies: 11
Views: 3584

Re: Serial data over telemetry channel

Sweet! Thanks.
Is there a thread you can point me to, or is it still too early..
by Hexperience
Sun Apr 17, 2016 2:03 pm
Forum: openTx
Topic: Serial data over telemetry channel
Replies: 11
Views: 3584

Re: Serial data over telemetry channel

Anything possible with this idea? The msh brain will soon be offering "jeti integration" and it would be great if we could do that on a radio that doesn't cost $1400 :)
by Hexperience
Sun Mar 27, 2016 2:55 am
Forum: openTx
Topic: Serial data over telemetry channel
Replies: 11
Views: 3584

Re: Serial data over telemetry channel

Wow... I was just thinking about this very topic. Hursto75, are you talking about being able to remotely program a flybarless controller with something like the jeti protocol?
by Hexperience
Thu Jan 21, 2016 7:48 pm
Forum: Hardware
Topic: New Spektrum DXe... 9 channels?
Replies: 3
Views: 2425

Re: New Spektrum DXe... 9 channels?

I can (and prefer to) live without dsm2.

It will be interesting to see what happens with it in the future. I wonder what chip it is, as compared to a DX6 (new one).
by Hexperience
Wed Jan 06, 2016 5:41 pm
Forum: Hardware
Topic: New Spektrum DXe... 9 channels?
Replies: 3
Views: 2425

New Spektrum DXe... 9 channels?

Has anyone seen which module is used in the new DXe? On some sites it's saying that it's a 6-9 channel transmitter... this could just be a trick like with the Dx5e. Meaning you only see "extra channels" when connected to specific bind and fly devices. Anyway, I was thinking about making another dsmx...
by Hexperience
Sat Sep 26, 2015 10:31 am
Forum: openTx
Topic: Not persistent volume control
Replies: 4
Views: 1113

Re: Not persistent volume control

Probably wants to use S1 for something else while flying. Good idea.
by Hexperience
Fri Sep 18, 2015 1:40 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Works perfectly. Thank you again. I almost had that at one point when I was following your suggestions, but I had the Switch setting as switch H down. I didn't realize that the source itself was all that was needed. I consider myself a fair intelligent person, (don't ask my 15 year old son though) b...
by Hexperience
Fri Sep 18, 2015 2:15 am
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

You are the best! Thanks so much for your time. I'll try it out first thing in the morning.
by Hexperience
Wed Sep 16, 2015 1:46 am
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Flight mode fade in and out almost works but the delay doesn't work. All I want to do is this, but have slow work.... CH01 [I1]Rud Weight(+100%) CH02 [I2]Ele Weight(+100%) CH03 [I3]Thr Weight(+100%) := SH Weight(+60%) Switch(SH↓) Delay(u1:d0) Slow((u2:d0) CH04 [I4]Ail Weight(+100%)
by Hexperience
Tue Sep 15, 2015 11:25 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Does anyone have a working example of the slow function on 2.1.3? Thanks.
by Hexperience
Tue Sep 15, 2015 9:13 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Is there anything I can do to essentially set switch H back to 0? OR use a logical switch of some kind as the source?
by Hexperience
Tue Sep 15, 2015 8:09 pm
Forum: openTx model setup
Topic: comparison chart for curves converting 0-100%vs(-100)-100%
Replies: 1
Views: 2045

Re: comparison chart for curves converting 0-100%vs(-100)-1

% x 2 - 100

30% x 2 = 60
60 - 100 = -40
by Hexperience
Tue Sep 15, 2015 7:06 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Thanks very much Mike... I'm so sorry, but I've lost track of the mixes. Could I trouble you to post the lines again or an eepe file? Thanks very much sorry for not understanding....

Ps. I know your super busy and I really appreciate your help on this minor thing.
by Hexperience
Tue Sep 15, 2015 2:14 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

2.1.3 It seems like when I do the multiply line it reduces the throttle channel, (with no switch on) to -50 to + 50. Weird... :) If I change the multiply line to replace it works normally when no switch is on. I assume then that multiply is active all the time and not effected by a switch. (?) So wi...
by Hexperience
Tue Sep 15, 2015 9:35 am
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Thanks again Mike. It's still a bit wonky but I'll play around with it.
by Hexperience
Mon Sep 14, 2015 9:35 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Like this? CH01 [I1]Rud Weight(+100%) CH02 [I2]Ele Weight(+100%) CH03 [I3]Thr Weight(+100%) *= SH Weight(-50%) Switch(SH↓) Slow((u3:d0) := SH Weight(+30%) Offset(30%) Slow((u3:d0) CH04 [I4]Ail Weight(+100%) The throttle channel doesn't move at all with H off. --- edit ---- missed the switch on the 3...
by Hexperience
Mon Sep 14, 2015 5:14 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Darn... I didn't want to get into all that.... oh well. I'll give ersky9x a try on the taranis. ;) \\edit... Hmm.. ersky does the same kind of thing on slow. It works the first time only. I know I'm missing something, but to me slow should be a little bit easier to use. Like I said, I have the mix w...
by Hexperience
Mon Sep 14, 2015 4:27 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Thanks Mike... yes, I have everything working just like you said, right up until I wanted to have the channel move slowly rather than instantly changing the throttle. "If this is what you want, it is going to be difficult to achieve." <-- Thank goodness... I thought I was going crazy. :) It seemed s...
by Hexperience
Mon Sep 14, 2015 3:08 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

Re: OpenTX example of SLOW?

Thanks Mike, for the reply. "Slow applies only to a single mix, and is applied to changes to the mix source only." There is more in that sentence than my brain can process... :) So what I'm trying to do is: Lets call it throttle on channel 6 (straight line curve) Press switch H and the throttle chan...
by Hexperience
Mon Sep 14, 2015 1:47 pm
Forum: openTx
Topic: OpenTX example of SLOW?
Replies: 24
Views: 3924

OpenTX example of SLOW?

Is there somewhere I can find how to use slow? It doesn't work at all as I would expect. I have a mix that works fine, when I hold the momentary switch on my Taranis, channel 6 goes to +60 and returns to where it was when released. Super easy. Now I want to do the same thing, but just have it slower...
by Hexperience
Thu Jul 30, 2015 7:35 pm
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

I understand what you mean ;) if only to hear the voltage being spoken, but to setup an alarm I wouldn't use the divided value as that value is not the real value from the lowest cell.. If you don't have a sensor that monitors all cells the alarm should be set using the total value. João If you're ...
by Hexperience
Thu Jul 30, 2015 7:28 pm
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

Kilrah wrote:No, we're in the "OpenTX 2.1 released" thread... So all of these discussions are about 2.1.
I know, I just wasn't sure if the multiplier was also in the 2.0 firmware.

I have only gone through 2.1 in companion, it's not on my tarranis yet.
by Hexperience
Thu Jul 30, 2015 2:13 pm
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

Thank you again... sorry but how do I set the multiplier? We're talking about 2.0.x right? Do I need to be on 2.1 ?

Thanks again!!
by Hexperience
Thu Jul 30, 2015 11:53 am
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

As for the voltage division. If you are getting only telemetry on the total pack voltage, which a lot of people do, then the same thing applies about 1 cell could go bad. Heck most people fly with a timer and nothing else. All I am saying is that rather than hearing the total voltage I want to hear ...
by Hexperience
Thu Jul 30, 2015 11:45 am
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

Thanks. So how could I enter something like 12.6 as a gear ratio?
Cheers
by Hexperience
Tue Jul 28, 2015 10:30 am
Forum: openTx
Topic: OpenTX 2.1 released!
Replies: 133
Views: 106502

Re: OpenTX 2.1 released!

Is there a way to divide a telemetry value with a constant? I like to divide the total voltage (detected by analog A1) with the amount of cells (4), to get single cell value Something like: Cell - calculated - A1 - multiply - 0.25 -- עופר -- I also think in terms of a per cell average when flying. ...
by Hexperience
Fri Jun 19, 2015 11:12 am
Forum: General help (FrSky Taranis radio)
Topic: CONECTION X8R BY BUS TO A FLYBARLESS MICROBEAST
Replies: 19
Views: 5894

Re: CONECTION X8R BY BUS TO A FLYBARLESS MICROBEAST

Nevermind... thought I noticed something but it was wrong...

Go to advanced search