openrcforums

Thank You!
It now works with GPS receiver set in u-center to 9600/ublox+nmea.
Also disabled debug output and commented this line per your suggestion: Can't wait for my baro sensor to arrive.

Thanks! I'll try and update as soon as possible. I'm away from home right now, so it might take a couple days. I have one question regarding physical GPS: I can configure it and save it's settings. I have disabled NMEA messages and only left Ublox. And also set baud rate to 38400. I was getting coor...

Thank you for the info! I'll try with ADS_MEASURE line commented regarding GPS fix: My GPS has LED indicator, so I can see when it gets 3D Fix. Even with 3D fix the GPS sensor was still not discoverable, although I was getting coordinates in debug output. However, I did the most resent test in GPS s...

I'm waiting for the pressure sensor and trying to make GPS work with oXs as the only sensor. I'm using version 8.02 and pretty much default config except a few changes: 1. In oXs_config.h Uncommented this line: #define GPS_INSTALLED Set serial pin to 4 (it was 2 in original file) #define PIN_SERIALT...

b.t.w. Here is how I flashed 4/6 ch Rs w/o soldering.

Just had to make small holes in heatshrink. Also, during flashing I pressed wires sideways with a finger, to get solid connection. Worked fine from 1st attempt!

Just got my new black receivers (both Hawkeye 9 and 4ch ones), But afraid turning them on. What is safe voltage range on servo rail? Is +6 volts OK, or should I provide regulated +5.0v? Another quersion: 4/6ch receiver does not have DTR/TX/RX... pins soldered. I presume, that to flash firmware, I wi...

p.s. v.04a is out too. I only see 03a in repository :( (Latest .hex file is 03a, and on SVN the file "jD_IOBoard_FrSkyMAVLink.ino" has "Version : V0.3a-FrSky, July 26 2013") Is there any way to obtain 04a? EDIT>> Found it (moved to GitHub): https://github.com/jdrones/jD-IOBoard/...

Well I agree, but looks like mine has more jitter, than what I've sen in other YT videos. So I guess, there must be some issue in mine.

However, I also understand, that the difference is really minute, so I don't think I will be able finding actual cause.

Finally got mine :) Very good radio, but I'm a little worried about jitter, I'm getting on analog inputs. It is also visible on channel monitoring screen. Surprisingly, my old 9XR has much less jitter. Please see my video here: http://www.youtube.com/watch?v=HK-7buKiqtk&feature=youtu.be Looks li...