Search found 30 matches
- Fri Mar 06, 2020 2:43 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
Done cheers.......Brett
- Thu Mar 05, 2020 7:16 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
822c ? I just flashed that cant see polarity option............
https://openrcforums.com/forum/viewtopi ... 598#p64969
Perfect Works Great thanks again........dont need that invertor now.......where the donate button
https://openrcforums.com/forum/viewtopi ... 598#p64969
Perfect Works Great thanks again........dont need that invertor now.......where the donate button
- Thu Mar 05, 2020 6:09 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
Ok it is working
not sure why but this is the hookup
9x signal is inverted going through inverter = non inverted signal to Tx Lora module
Rx side = Rx Lora module feeds inverted uart 6 PPM/Sbus pin only ( not uart 1,3 or 6 on the left side on the omnibus F4 v3)
thanks heaps for the help Mike
not sure why but this is the hookup
9x signal is inverted going through inverter = non inverted signal to Tx Lora module
Rx side = Rx Lora module feeds inverted uart 6 PPM/Sbus pin only ( not uart 1,3 or 6 on the left side on the omnibus F4 v3)
thanks heaps for the help Mike
- Wed Mar 04, 2020 12:37 pm
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
No it does not accept inverted signal I made this inverter with BC547,
I did another sample @ 1mhz after the inverter and got about 66 frames (only about 15 shown in pic below)... does that seem normal ?
I did another sample @ 1mhz after the inverter and got about 66 frames (only about 15 shown in pic below)... does that seem normal ?
- Wed Mar 04, 2020 10:04 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
Ofcoarse .....i see now.....
i dont understand the sbus output, If i move the throttle it is like the gap in the first pulse increases
i dont understand the sbus output, If i move the throttle it is like the gap in the first pulse increases
- Wed Mar 04, 2020 9:29 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
Ebyte Lora module 433,
I just manager to hook it up and try and it wont work on selecting Sbus
is there Sbus output from turnigy 9x with er9x firmware?
Brett
I just manager to hook it up and try and it wont work on selecting Sbus
is there Sbus output from turnigy 9x with er9x firmware?
Brett
- Wed Mar 04, 2020 7:10 am
- Forum: Turnigy 9XR radio
- Topic: PPM Frame size
- Replies: 23
- Views: 23411
Re: PPM Frame size
Hi Mike ,
can i use the same formula for 12 channels Sbus LRS and ER9x on turnigy 9x 12 x 2.1 + 4.5 = 29.7 + 4.5 = 34.2ms ?
no option above 32.5ms in my FW version
Brett
can i use the same formula for 12 channels Sbus LRS and ER9x on turnigy 9x 12 x 2.1 + 4.5 = 29.7 + 4.5 = 34.2ms ?
no option above 32.5ms in my FW version
Brett
- Thu Jun 27, 2019 10:40 pm
- Forum: UPGRADE BOARDS
- Topic: 9x replacment board difference
- Replies: 13
- Views: 14308
Re: 9x replacment board difference
Wow I have never seen the product before,
I was think about the damage I may do with my reflow and wondered about getting one of those chip nozzels
https://ebay.to/2XizjgI
is that the best idea for re fitting ?
cheers
Brett
I was think about the damage I may do with my reflow and wondered about getting one of those chip nozzels
https://ebay.to/2XizjgI
is that the best idea for re fitting ?
cheers
Brett
- Thu Jun 27, 2019 9:32 am
- Forum: UPGRADE BOARDS
- Topic: 9x replacment board difference
- Replies: 13
- Views: 14308
- Wed Jun 26, 2019 9:45 pm
- Forum: UPGRADE BOARDS
- Topic: 9x replacment board difference
- Replies: 13
- Views: 14308
Re: 9x replacment board difference
Is that to future prof any firmware updates of so you can fill the Transmitter with lots of model s as memory?
just a quick search on ebay I see they are 4 times the cost of Atmega64
just a quick search on ebay I see they are 4 times the cost of Atmega64
- Wed Jun 26, 2019 8:15 am
- Forum: UPGRADE BOARDS
- Topic: 9x replacment board difference
- Replies: 13
- Views: 14308
Re: 9x replacment board difference
Ok great , I have 6 of these Tx and first time I have come across the green chip and out of the 4 loaded with ER9x the green chip one is the only one that the screen locks up when scrolling thought the menu alot so I was looking for a spare replacement board, and maybe can I fit another chip also ? ...
- Tue Jun 25, 2019 10:52 pm
- Forum: UPGRADE BOARDS
- Topic: 9x replacment board difference
- Replies: 13
- Views: 14308
9x replacment board difference
Can someone tell me what the difference is between these two boards at HK
https://hobbyking.com/en_us/turnigy-9x- ... board.html
https://hobbyking.com/en_us/turnigy-9x- ... tocol.html
is it Green ED040502-H16D VS atmega64 ?
https://hobbyking.com/en_us/turnigy-9x- ... board.html
https://hobbyking.com/en_us/turnigy-9x- ... tocol.html
is it Green ED040502-H16D VS atmega64 ?
- Tue Jun 25, 2019 10:21 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Has anyone used a quadcopter esc on a wing?
- Replies: 7
- Views: 10984
Re: Has anyone used a quadcopter esc on a wing?
im using mini quad esc more often now on my S800 and ARWing and planes
first the SN20A and now my fav XS30A DYS
Bench tests show a 450ma less current draw on my XS30A
You just have to make sure the nut is tight as you cant turn off breaking
first the SN20A and now my fav XS30A DYS
Bench tests show a 450ma less current draw on my XS30A
You just have to make sure the nut is tight as you cant turn off breaking
- Thu Dec 06, 2018 5:05 am
- Forum: Electronic Mods
- Topic: FlySky FS-i6x 433Mhz Mod low range
- Replies: 5
- Views: 8380
Re: FlySky FS-i6x 433Mhz Mod low range
Ok i had time to do a range ground test today interesting I found where the Antenna was held/mounted on the Tx makes a difference interference from outside source like DVR makes a difference Antenna design makes a big difference Moxon vs Vee lots of outside interference to watch out for..... 1 watt ...
- Sun Dec 02, 2018 12:15 pm
- Forum: Electronic Mods
- Topic: FlySky FS-i6x 433Mhz Mod low range
- Replies: 5
- Views: 8380
Re: FlySky FS-i6x 433Mhz Mod low range
Ok only ground testing today as to windy but I changed the Tx and split the voltage with UBec
6 volts for radio and 3s for the 433 module
6 volts for radio and 3s for the 433 module
- Sat Dec 01, 2018 5:25 am
- Forum: Electronic Mods
- Topic: FlySky FS-i6x 433Mhz Mod low range
- Replies: 5
- Views: 8380
Re: FlySky FS-i6x 433Mhz Mod low range
Thanks Kilrah,
this module is 100mw and only draws 67.5ma from 4xAAs
if I use a 12 volt lipo straight to module it only increases 1.5ma to 69ma
this module is 100mw and only draws 67.5ma from 4xAAs
if I use a 12 volt lipo straight to module it only increases 1.5ma to 69ma
- Fri Nov 30, 2018 9:12 pm
- Forum: Electronic Mods
- Topic: FlySky FS-i6x 433Mhz Mod low range
- Replies: 5
- Views: 8380
FlySky FS-i6x 433Mhz Mod low range
Hi Im having a range problem using 433mhz orange HK modules in flysky i6x ? I have 6+ radios with hawkeye- deluxe,orangetx,orangerx,flytron, even using a orange Rx as a tx works better all different radios all work very well I have fitted orangetx inside my new Flysky radio to PPM trainer port and g...
- Sat Jun 21, 2014 12:19 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
that works great
yes the stock peizo is crappy
I tried a better quality one which was a little better
then a very tiny speaker from my sony xperia that works the best
http://youtu.be/xR7BxBg9a0s
yes the stock peizo is crappy
I tried a better quality one which was a little better
then a very tiny speaker from my sony xperia that works the best
http://youtu.be/xR7BxBg9a0s
- Fri Jun 20, 2014 7:52 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
All good makes sense now........
Think it might be better money spend to purchase the taranis
where is the audio firmware might try that anyway ???
thanks again
Think it might be better money spend to purchase the taranis
where is the audio firmware might try that anyway ???
thanks again
- Thu Jun 19, 2014 11:15 pm
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
I understand but as the "play sound" no matter what i set it to sounds like a beep to me with very subtle difference to small to rely on for a timer
can the 9x play tracks ?
can the 9x play tracks ?
- Thu Jun 19, 2014 10:21 pm
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
I can not set a alarm to beep at say 8 minutes easerly and have that alarm sound different to the "minute call" beeps
- Thu Jun 19, 2014 9:26 pm
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
Not on mine, I have it set to THs in that file and with timer set to 20 seconds it beeps every 13 seconds after throttle has been raised then droped the timer will keep going All this programing to get a simple timer to count UP doesnt make sence .......cant we have a box to tick like on screen 2/11...
- Wed Jun 18, 2014 1:16 pm
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
here is the file attached
yes it is THs and yes i would like it to pause when throttle stick is back down to lowest position
thanks brett
yes it is THs and yes i would like it to pause when throttle stick is back down to lowest position
thanks brett
- Wed Jun 18, 2014 9:54 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
that works thanks...............but still only a single beep no matter what parameter i change to in Special functions
and is still 3 seconds to early if i test at say 20 seconds it will beep at 17 seconds etc
even once the timer is started even with throttle lowered to stop timer it will keep going
and is still 3 seconds to early if i test at say 20 seconds it will beep at 17 seconds etc
even once the timer is started even with throttle lowered to stop timer it will keep going
- Wed Jun 18, 2014 6:38 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
Yes in the first line of Logical switch i get L1 (then can only select Timer not Timer1) then V1 wont go higher than 175 same as V2 also wont go lower than 0.1 Also it is about 3 seconds out If i set timer to 30 seconds it will beep at 27sec My biggest problem is not being able to set timer above 2 ...
- Tue Jun 17, 2014 7:43 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
thanks again great i downloaded and run L1 trimer1 there is only a choice on that line of v1 max 175 and v2 max 175 which = 350 seconds then in the simulater i just get a single beep no matter what the setting is that could be confused with the 1 minute beep also the companion program keeps crashing...
- Mon Jun 16, 2014 10:36 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
thanks for the reply, ok i was going to update Then spent last couple hours or more looking for the firmware as it doesn't come with Opentx Companion and it doesnt seem to be able to download it asking for a file, so many updates and name changes that if you havent read up like me sense my last upda...
- Fri Jun 13, 2014 8:41 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
I thought this Might me tricky but not impossible
- Sun Jun 08, 2014 9:32 am
- Forum: openTx
- Topic: Timer in custom switches not working?
- Replies: 26
- Views: 12955
Re: Timer in custom switches not working?
hi, I thought I had this sorted but haven't
I want the timer to count up using THs to say 8 min then beep (not long if pos) and keep counting
9x with opentx-2751
cheers
Brett
I want the timer to count up using THs to say 8 min then beep (not long if pos) and keep counting
9x with opentx-2751
cheers
Brett
- Thu Sep 12, 2013 12:13 am
- Forum: openTx
- Topic: Count up timer with beeps ver 2751
- Replies: 1
- Views: 1923
Count up timer with beeps ver 2751
Im having trouble setting count up timer and have it beep at say 6 minutes using THs
I have it counting up if timer is set to 00.00 but will not beep ever
needs only beep the last 5 seconds if poss and not for 30 seconds
cheers brett
I have it counting up if timer is set to 00.00 but will not beep ever
needs only beep the last 5 seconds if poss and not for 30 seconds
cheers brett