Search found 25 matches

by wombat67
Tue Jan 29, 2019 12:38 pm
Forum: er9x
Topic: The new Turnigy 9X hardware can use ER9X ?
Replies: 43
Views: 40496

Re: The new Turnigy 9X hardware can use ER9X ?

Hi Chris Don't know if you sorted your issue but I had the same problem https://openrcforums.com/forum/viewtopic.php?f=5&t=11446 In my case it was the iA8 receiver at fault. I contacted HobbyKing about the receiver not binding properly and instantly was sent a replacement receiver. The speed at ...
by wombat67
Tue Oct 23, 2018 10:50 pm
Forum: er9x
Topic: Help with Turnigy iA8 AFHDS2A receiver binding
Replies: 5
Views: 6028

Re: Help with Turnigy iA8 AFHDS2A receiver binding

Nope to another receiver - and HK don't even seem to stock iA8 receivers. Seems I'll have to get an i6A instead. It's a radio for someone else. I too would stay away but what can you do when someone isn't up to spending enough for decent gear. Cheers Ps - a quick edit - For anyone following this tal...
by wombat67
Tue Oct 23, 2018 10:20 pm
Forum: er9x
Topic: Help with Turnigy iA8 AFHDS2A receiver binding
Replies: 5
Views: 6028

Re: Help with Turnigy iA8 AFHDS2A receiver binding

Thanks for the link However, I'm starting to think issue is with receiver and want to know if anyone else has experienced the following... As above the receiver says it has bound by the led going solid. Now after a bt more investigation I have found that yes the receiver DOES bind with er9x and the ...
by wombat67
Tue Oct 23, 2018 2:37 pm
Forum: er9x
Topic: Help with Turnigy iA8 AFHDS2A receiver binding
Replies: 5
Views: 6028

Help with Turnigy iA8 AFHDS2A receiver binding

Hey All Sorry if I missed the memo on this one. I have searched and read most posts on topic but I still can not get the new 9X with the AFHDS(2A??) module and iA8 receiver to play ball. The iA8 receiver does say AFHDS2A. So I've got a brand new 9X, flashed it right away to er9x (did download the or...
by wombat67
Sun Oct 23, 2016 9:37 am
Forum: ersky9xr
Topic: Slow Up and Slow Down wrt movement from centre
Replies: 4
Views: 3761

Re: Slow Up and Slow Down wrt movement from centre

Thanks Mike

In case anyone is also wanting such a function or if anyone can see a way to improve, here is what I have done...

+100 THR L9 Slow(u2:d2)
+100 THR L7 Slow(u10:d2)
+100 THR L8 Slow(u2:d10)
with
L7 v>val THR 4
L8 v<val THR -4
L9 |v|<val THR 5

Cheers
Kevin G
by wombat67
Sun Oct 23, 2016 12:40 am
Forum: ersky9xr
Topic: Slow Up and Slow Down wrt movement from centre
Replies: 4
Views: 3761

Re: Slow Up and Slow Down wrt movement from centre

Thanks Mike, but it doesn't quite work. There is a bit of a time delay when changing between forward and reverse. The Slow values I want to use when accelerating in forward or reverse are between 10 and 15. Deceleration values are much less 2 to 4. With the mix and these values +100% Thr Curve(x>0) ...
by wombat67
Sat Oct 22, 2016 10:22 pm
Forum: ersky9xr
Topic: Slow Up and Slow Down wrt movement from centre
Replies: 4
Views: 3761

Slow Up and Slow Down wrt movement from centre

Hey all, Here is my problem/question. I am using the slow up and slow down function to influence the acceleration and decelleration of land based vehicles. That means that my throttle at neutral (0) by default. Stick up (+) moves vehicle forwards and stick down (-) moves vehicle backwards. Now if I ...
by wombat67
Tue Dec 08, 2015 9:39 pm
Forum: 9Xtreme upgrade board
Topic: OK, let's document this!
Replies: 74
Views: 35169

Re: OK, let's document this!

Only three things are, 1. SD card type and max capacity. 2. A more accessible battery, with an easier to find size and type. ie (CR2032 is more widely available.) 3. A way to save the original F.W, in case someone isn't ready for ersky9x or a hardware failure. Will have more suggestions after I fin...
by wombat67
Wed Nov 11, 2015 11:59 am
Forum: 9Xtreme upgrade board
Topic: TankER9X Firmware Compatibility with 9Xtreme
Replies: 4
Views: 4066

Re: TankER9X Firmware Compatibility with 9Xtreme

Silly Me I forgot to mention in all the blurb above that the 9Xtreme is a great thing for R/C tanks - brilliant - Tanks needs switches and as you can see by my other posts - it's all about adding switches.

If you have a tank - get a 9X and a 9xtreme - simples

Cheers
by wombat67
Wed Nov 11, 2015 11:51 am
Forum: 9Xtreme upgrade board
Topic: TankER9X Firmware Compatibility with 9Xtreme
Replies: 4
Views: 4066

Re: TankER9X Firmware Compatibility with 9Xtreme

Hi Mike The only significant changes that are involved with tankER9X are the templates which are of course readily available with the actual firmware. Because most tanks are operated by a small number of control units the templates match these existing units. I'm quite sure that if you looked at the...
by wombat67
Fri Oct 30, 2015 9:00 pm
Forum: 9Xtreme upgrade board
Topic: 3 Position Swicth Upgrades - How to....
Replies: 21
Views: 11578

Re: 3 Position Swicth Upgrades - How to....

I concur....

EXT 8 sometimes even fails to appear as an option in the hardware screen. Also ELE can appear as an option at times.

Cheers
by wombat67
Thu Oct 29, 2015 2:33 am
Forum: 9Xtreme upgrade board
Topic: 3 Position Swicth Upgrades - How to....
Replies: 21
Views: 11578

Re: 3 Position Swicth Upgrades - How to....

Thanks Mike - Perfect - 3-pos switch overload here I come
Cheers
by wombat67
Wed Oct 28, 2015 11:40 pm
Forum: 9Xtreme upgrade board
Topic: 3 Position Swicth Upgrades - How to....
Replies: 21
Views: 11578

Re: 3 Position Swicth Upgrades - How to....

HI Mike Thanks for the reply and yes I had already visited that link from a previous forum request on adding the 3-pos switches. In the hardware menu, on the 9Xtreme, there are 8 EXT options for extra switches. These use the 8 trim switch inputs on the original mainboard. I'm using one of them to ma...
by wombat67
Wed Oct 28, 2015 11:58 am
Forum: 9Xtreme upgrade board
Topic: 3 Position Swicth Upgrades - How to....
Replies: 21
Views: 11578

3 Position Swicth Upgrades - How to....

Ok now I'm sure that this is a very simple process. Is this correct? Take a 2-position switch, replace it with a 3 Position one. Re-connect the ground wire to the middle contact of the 3-pos switch and the other existing wire to one of the outer contacts of the 3-pos switch. Then get a new wire and ...
by wombat67
Mon Jul 28, 2014 4:12 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960677

Re: ERSKY9X Coding

Hi Mike and Co. First up just want you all to know that I am in no way up to your 'pay grade' wrt to all the coding that you all do. Just involved in simple edits of ER9X to suit land/water vehicles rather than flying thingies. As such most of my edits are of terminology, changing aeronautical terms...
by wombat67
Fri Jul 25, 2014 7:41 am
Forum: ersky9xr
Topic: Manuals for 9XR Pro
Replies: 39
Views: 84105

Re: Manuals for 9XR Pro

Hey Mike - me again Compiling is now a success. However I have come across a few other issues that I got you to fix ages ago for ER9X and the same have reappeared here with sky. Both have to do with an edit of the en.h file. The first is renaming of the sticks. They are renamed in the en.h file #def...
by wombat67
Thu Jul 24, 2014 9:42 pm
Forum: ersky9xr
Topic: Manuals for 9XR Pro
Replies: 39
Views: 84105

Re: Manuals for 9XR Pro

HI Mike
Thanks for that. Not a pain at all. You guys always come through with the goods. Will give font up and see how it goes
Cheers
Kevin G
by wombat67
Thu Jul 24, 2014 12:01 pm
Forum: ersky9xr
Topic: Manuals for 9XR Pro
Replies: 39
Views: 84105

Re: Manuals for 9XR Pro

Thanks Mike again for your quick reply. Yep things got a little further along but alas another error. ---------- REVX -DFRSKY -DCPUARM -DDEBUG -MD -MP -MF skyRobj/lcd.o.d -fno-exceptions -I . - I./inc lcd.cpp -o skyRobj/lcd.o lcd.cpp:43:29: fatal error: font_se_05x07.lbm: No such file or directory c...
by wombat67
Thu Jul 24, 2014 3:28 am
Forum: ersky9xr
Topic: Manuals for 9XR Pro
Replies: 39
Views: 84105

Re: Manuals for 9XR Pro

Hi Mike Sorry but I must be missing something somewhere. No matter what I do I can not compile ERSKY9X for use on the 9XRPro. I have tried on several Windows machines running WinXP through to Win7. I have installed YAGARTO on all. Not sure about the SAM-BA V2.12 install on the Win7 machine. Is SAM-B...
by wombat67
Thu Jan 30, 2014 1:12 am
Forum: er9x
Topic: Issue with #define STR_STICK_NAMES
Replies: 3
Views: 2782

Re: Issue with #define STR_STICK_NAMES

Thanks Mike for the super quick reply. Of course worked a treat and all is good. If you mind answering just some unrelated questions. I have a number of newer WTV modules from other projects and have not yet looked at the 9X audio mod. The audio post is 181 pages. I know all too well the WTV issues ...
by wombat67
Wed Jan 29, 2014 10:19 pm
Forum: er9x
Topic: Issue with #define STR_STICK_NAMES
Replies: 3
Views: 2782

Issue with #define STR_STICK_NAMES

Hi There I've have been editing the en.h file and wish to rename the sticks. In a previous release, not sure what number but around August last year a simple edit of: #define STR_STICK_NAMES "RUD ELE THR AIL " worked and the stick were renamed to whatever. However in the latest release edi...
by wombat67
Fri Aug 09, 2013 2:41 am
Forum: er9x
Topic: Er9x language options
Replies: 13
Views: 6326

Re: Er9x language options

Hi Mike, Sorry but it looks like a 6th hour was needed. Problem sorted. As above - editing en.lang and not en.h
Cheers
by wombat67
Fri Aug 09, 2013 2:05 am
Forum: er9x
Topic: Er9x language options
Replies: 13
Views: 6326

Re: Er9x language options

Hi Mike Sorry but I have been at this for about 5 hours. I want to change the actual template names. I have tried editing the en language file but I am sure I am doing something wrong. Say I want to change the templates to read: 1 Cars 2 Planes 3 Boats 4 Trains rather than 1 Simple 4-CH and so on......
by wombat67
Wed Aug 07, 2013 9:29 pm
Forum: er9x
Topic: Can't compile Rev 802, Error with Templates
Replies: 2
Views: 2204

Re: Can't compile Rev 802, Error with Templates

Hi Mike Thanks for the quick reply. To compile I have a .bat file (compile.bat) with simply make -f makefile The makefile is edited such that HELI = YES TEMPLATES = NO NOPOTSCROLL = PHASES = N2F = NO Thing is I want the templates normally I only tried to leave them out to see if I could get the comp...
by wombat67
Wed Aug 07, 2013 12:29 pm
Forum: er9x
Topic: Can't compile Rev 802, Error with Templates
Replies: 2
Views: 2204

Can't compile Rev 802, Error with Templates

First up sorry if I am missing something obvious but I am unable to compile the very latest revision 802. Not really had much troubles before. The process falls over when it comes to the templates and I end up with the an error message for each of the templates along the lines of: templates.cpp:45:4...

Go to advanced search