Search found 19 matches

by PoppyAnn
Sun Nov 22, 2015 11:11 am
Forum: General help (FrSky Taranis radio)
Topic: Good Radio,Poor Understanding
Replies: 1
Views: 818

Re: Good Radio,Poor Understanding

first off have you got your radio set up in the correct mode D8,D16,LR12 you must have the internal module set to the same protocal as you want to bind your receiver to or you will never get it to bind, to do this :- 1. turn on the transmitter. 2. then short press of menu button which should take yo...
by PoppyAnn
Wed Oct 14, 2015 8:57 am
Forum: FrSky Taranis radio
Topic: Unable to update flash (Taranis Plus)
Replies: 4
Views: 1160

Re: Unable to update flash (Taranis Plus)

Hi there, Does the Taranis not use a SD card? I have recently bought a Taranis X9E and was having this problem and in the end I just removed the SD card from the transmitter and put it directly into my computer and put the new firmware directly onto it then returned it to the transmitter and updated...
by PoppyAnn
Sat Aug 02, 2014 4:54 pm
Forum: FRSky Telemetry Mods
Topic: FrSky DJT with Bluetooth.
Replies: 5
Views: 6474

FrSky DJT with Bluetooth.

Just a quick thank you to all on forum for all the help and work people do for others. I copied several other peoples work and fitted a bluetooth board to my FrSky DJT module and now I get all my telemetry out to my Samsung S3 vi FrSky Dashboard. I altered the other persons idea and just fitted the ...
by PoppyAnn
Sat Jul 19, 2014 5:47 pm
Forum: er9x
Topic: New Flysky FS-i10 transmitter
Replies: 46
Views: 21434

Re: New Flysky FS-i10 transmitter

the best thing it offers is a very easy transmitter to set up without having to be a computer programer.
by PoppyAnn
Tue Apr 08, 2014 11:33 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: help with model setup with a difference
Replies: 2
Views: 4827

Re: help with model setup with a difference

thanks Mike i will give it a go using elevator and ailerons
by PoppyAnn
Tue Apr 08, 2014 11:31 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Use sticks not for servo position but for servo speed
Replies: 27
Views: 17412

Re: Use sticks not for servo position but for servo speed

Again many thanks Mike and Kilrah i am going to try the same mix for a bulldozer i have built out of lego.

regards Poppy Ann
by PoppyAnn
Mon Apr 07, 2014 5:28 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: help with model setup with a difference
Replies: 2
Views: 4827

help with model setup with a difference

hi i am trying to use the er9x to operate a Lego bulldozer i built, i managed to get the tracks to work using channel 1 and 2 and the steering works when i move the left stick left and right by slowing one track and speeding up the other but i cannot think of a way to operate the bucket lift and cro...
by PoppyAnn
Sat Mar 29, 2014 2:16 am
Forum: Hardware
Topic: 9X mode
Replies: 9
Views: 3184

Re: 9X mode

Many thanks Slebetman that helps a lot i just did not want to go out and buy a module that i all ready own.

regards
Poppy Ann.
by PoppyAnn
Thu Mar 27, 2014 7:04 am
Forum: Hardware
Topic: 9X mode
Replies: 9
Views: 3184

Re: 9X mode

i just wanted to know what mode (protocol) the 9X transmitter came with as from Hobby King for some reason i can not find it mentioned anywhere.
I bought extra modules for DSMX (DSM2) and ACCst but i wanted to know what the standard module it arrives with is.

regards Poppy Ann.
by PoppyAnn
Wed Mar 19, 2014 12:57 pm
Forum: Hardware
Topic: 9X mode
Replies: 9
Views: 3184

9X mode

can some one tell me what mode the stranded module uses?
i am not sure if i used the correct term with mode but what i want is if it uses FHSS,ACCST,DSSS,DSMX,DSM2 etc.

thanks for any help.
regards Poppy Ann.
by PoppyAnn
Fri Nov 01, 2013 11:57 am
Forum: Hardware
Topic: simulator port stopped working after fitting light.
Replies: 7
Views: 1529

Re: simulator port stopped working after fitting light.

hi there, this is what i have done, i did the mod to get the trainer port working first and i did the mod that you cut a track and solder in a 1K resister in the module and that was working great, then i did the mod to flash the transmitter using a USBASP and soldered the wires direct to the board a...
by PoppyAnn
Thu Oct 31, 2013 4:14 pm
Forum: Hardware
Topic: simulator port stopped working after fitting light.
Replies: 7
Views: 1529

Re: simulator port stopped working after fitting light.

the trainer port stopped working, up to now i have not to unplug the light yet i will give it a try and see if it makes any difference, not sure why i did not think of that brain is asleep.
by PoppyAnn
Thu Oct 31, 2013 3:10 pm
Forum: Hardware
Topic: simulator port stopped working after fitting light.
Replies: 7
Views: 1529

simulator port stopped working after fitting light.

hi i have a 9x radio and i did the mod to get the trainer port/ simulator port to work and it did work out great but after i fitted the usbasp programmer plus the screen light it has stopped working, has anyone else come across this problem?

regards Poppy Ann.
by PoppyAnn
Tue Sep 10, 2013 3:06 pm
Forum: er9x
Topic: basic programming knowledge wanted
Replies: 8
Views: 1361

Re: basic programming knowledge wanted

many many thanks for pointing me to eepe i thought i was using that but i was using companion 9x eeprom editor i know i had downloaded both of them but kept trying the wrong program, eePe is so much easier to use(i even gave a donation as it helps so much), now i have my plane with flaperons (now i ...
by PoppyAnn
Tue Sep 10, 2013 9:47 am
Forum: er9x
Topic: basic programming knowledge wanted
Replies: 8
Views: 1361

Re: basic programming knowledge wanted

many thanks for the help i now have the ailerons working great. Now i will just have to try and get the flaps to work. i would have never expected the limits section to be where i got reverse from. for people new to this menu system it would be very helpful to have some of these simple ways of doing...
by PoppyAnn
Mon Sep 09, 2013 6:36 pm
Forum: er9x
Topic: basic programming knowledge wanted
Replies: 8
Views: 1361

basic programming knowledge wanted

Hi can someone please help me with the programming of my radio that i have flashed with er9x, i would like to know how to set up channel 5 so i can use it for my right aileron and it will need to operate opposite as i can not see any reverse on this firmware? and my second problem is how do i progra...
by PoppyAnn
Mon Aug 05, 2013 9:18 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: 3 position Flaps
Replies: 5
Views: 2088

Re: 3 position Flaps

sorry about posting in the wrong place, i just saw the post for using the 3 position switch and asked the question, when i can i will try flashing the latest firmware i just have to buy the bits to connect the transmitter to the computer.

regards Poppy Ann.
by PoppyAnn
Mon Aug 05, 2013 8:17 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: 3 position Flaps
Replies: 5
Views: 2088

Re: 3 position Flaps

this is with the stock firmware, i am not sure which version it is, on the main board it says ver 1.5 i think, it is printed so small i can hardly make it out.

thanks for your help.

Poppy Ann.
by PoppyAnn
Sun Aug 04, 2013 7:03 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: 3 position Flaps
Replies: 5
Views: 2088

Re: 3 position Flaps

hi i tried this but cannot find any section named mixer, on mine there is a menu named PROG which shows 3 choices of mix but even in there it does not give a option for the three position switch which i want to use any one know how to do it?

regards Poppy Ann

Go to advanced search