openrcforums

His actual words to me were " I will never allow anything with OpenTX on the flight line of any LMA event"

I was told by Ivan Goodchild that anything with open TX would not be allowed, he is the radio guru for the LMA He can be contacted here: [email protected] Please do not mention my name.

In the UK, the Large Model Association have been told by their advisor on radio systems that anything using OpenTX is not allowed to be used on any flight line where public are watching, i.e. any model shows. Can this be addressed.

According to the forum on the Frsky website they were hopeing to release the Horus in June! Nearly July now!

No, nothing has been changed!

For some reason the speech is very slow on my Taranis plus. Any ideas anybody?

Although the heptic upgrade is usefull for the hard of hearing, would it be possible to add a red and green led to the case so that if flying gliders and if you are deaf these led's be linked to the vario so that when you are climbing the green flashes and decending the red flashes. Just a thought!!

Thanks you. Will try later.

Thanks for your reply, yes everything checked, perhaps you could send youyr setting for me to compare this end.

Cliff

No body interested in this then!!

I have purchased and installed an N2 industries airspeed indicator but cannot get any readings from it. I have setup the telemetry as I beleive it should be, but would be greatful if somebody could have a look for me just to make sure. am attaching the model eep. Thanks in anticipation.

Have just changed retract from channel 1 to channel 8 and battery from channel 8 to channel 1 and retract now works on the chosen switch!!

Have just changed to (add), still no activity from retract!

What should it be?

Ok, I think I have it right now but, still no response from the retract, have just tried a servo tester with it and it works fine!

Sorry to be a pain!

Tried both! Iiether get the switch with a down arrow or an up arrow!

I cannot seem to be able to change it!

Thanks for your quick reply, but sorry I do not understand!

I am trying to get a retract to work on a scale glider, using the Taranis, and 8XR rx. The retract is on channel 1, for some reason or not, I cannot get any switch to work it i am including the setup eep if this is any help.

Wow, thanks, that was easy!!!

Is it possible for the telemetry to give altitude in feet as well as metres?

Thanks rob, got it working after a fashion, see file, just got to work out flight conditions now! Sorry to those of you who tried to open this file, you need to change the extension from (.zip) to (.eepe)

Have got v-tail, flaps and ailerons working using the Wizard in Companionx9. I want to use throttle for Crow but no matter what I do I just cannot get anything to work! Have attached my model .eepe file if anybody can help.

Ok, got the display working, but nothing audible!

Thanks, that seems to be doing something!

Thanks Kilrah, have looked at this page countless times and played around with settings to no avail. According to Frsky, all you need to do with the new Vario is plug it in to the Smart port on the receiver and in the telemetry screen on the Taranis, set the "source" to Vario, and that sho...

Thanks for your quick reply, did not know that I had to do that, and do not know how to, still very new to this!

Thanks for your quick reply, did not know that I had to do that, and do not know how to, still very new to this!

Have just purchased Frsky new Vario for use with the new Taranis, am using the X8R Rx with Smart port, I cannot seem to get a reading from the vario at all, just plug into Smart Port as per instructions, the led flashes and that is it nothing on the Transmitter at all. Any ideas anybody?