openrcforums

Thanks for the pointer JHSA that was one of the first solutions I tried, this also stated read-only with this card.

Can anyone spot my deliberate mistake? I've been trying to reinstall Frsky OS to my Horus X12S so I can update the Frsky firmware. Seems I'm spinning my wheels here. Twice I've had to disconnect the battery to get it back to life. This is certainly a black art. I have been attempting to follow this ...

That's also my conclusion now Kilrah.

I have recently bought a number of micro sd cards from different suppliers and found that I was unable to write or format them :? I've tried numerous methods I found on the web using Windows 10, various software etc, all to no avail. Linux reports successful format, but is lying to me. Any other bod...

Thanks for the prompt response Kilrah, I will proceed with caution.

Likely a silly question

Would I be able to use a copy of an SD card from another Horus X12S that runs Frsky OS to replace Opentx temporarily while updating Frsky Tx firmware to the latest version?

I have hit the buffers here while attempting to install FrSky OS so's I could update to the latest firmware v1.6.06 I think. I removed the OTX micro sd card & put another in with the 3 base folders for FROS as per the instructions. I then flashed the DFU boot file OK followed by the firmware fil...

Thanks Kilrah, most grateful.

Hi all, I'm having a tussle with companion, the latest version. Horus x12s,Taranis X9D and Jumper T16 Pro. Horus and Jumper are on latest V2.3.3 rc2 After connecting the radio, no matter which, when I select "Backup radio to file" I get the error message "This function is not yet impl...

Sorry Kilrah, I forgot to mention that. Do you mean I should remove the TRx entries in the Phoenix settings? I'm unsure as to how to use those particular settings. I've not been able to find any examples online that I could study. Do you know of any examples you could point me to?

Mike.

Apologies, Saturday morning.... a bit muzzy-headed

Please excuse my ignorance, I'm at a loss as to how to attach the OTX files to my posting. The full editor does not seem to have an icon to attach files.

As I said in the previous post, when I switch SH to allow the student Tx control of the craft, it functions well as it should, but it will not mirror the rates & expo I have on the master Tx, it uses full throw of the sticks making it too twitchy for a new learner to cope with. The only way I fo...

I found the info re' Expo on Master Tx would apply to student Tx to be incorrect, in my case at least. I had to program Expo & Rates into the Student Tx in the Mixes screen to get a more sedate model for the learner.

Many thanks for sharing your time, knowledge, and most of all, patience with an old duffer :) I found a post that clarified all, even for me :? Apologies for not conducting a more thorough search before asking here. It may help others if I repost it. All the student has to do is to fly the model. Al...

Thanks for the input gents, however, I'm still having difficulty getting rates & expo to work when the student radio is active. I have 25% Expo & 60% rates applied by switch SB- on the master Tx but it fails to apply when the student radio has control. I must be missing an extremely large el...

I'm sorry gents, I have ancient, heavily abused grey cells, are you referring to the student radio or the master radio

Is this on the master Tx Mike? If so, no. I have TR1 to TR4 listed in Inputs because I have SH triggering student mode. Released by me moving sticks on master Tx.

Thanks to all who assisted me in getting Trainer mode working. Apologies for being so ignorant in the Black Art of RC programming :roll: I have the 2 Tx's working as they should in trainer mode, albeit with a fly in the ointment :( When the student Tx has control the travel of the servos is 100%, I ...

Ditto here Early X9D but also Horus X12S Beta, professionally upgraded by vendor. Both running Opentx v 2.2.3, original PCB batteries.

Many thanks, the mist clears

Thanks for the prompt response Kilrah. Would this be on the Taranis slave Tx?

Hello all, I'm attempting to set up trainer mode, Horus X12s master / Taranis X9D slave, latest OpenTX version, for the 1st time. I'm unsure as to how to resolve a problem. I'm using a Phoenix 1600 I've just built, this has separate aileron channels using 1 and 2, flaps are on 6 and 7. In the traine...

Thanks Kilrah, much obliged.

Sent from my Nexus 7 using Tapatalk

Evening all, I have trawled the web and been unable to find yea or nay relating to using a Horus 12S master with a Taranis slave as trainer, both using latest OPENTX system. Anyone able to give a definitive answer on this puzzling conundrum?

Mike P.

Thanks Kilrah, it was a corrupted driver, Zadig did an Arnie Swarzenegger on it

I have an unusual occurrence with my Horus. It's a Beta unit, fully updated hardware by T9 Hobby Sport, been running Opentx 2.2.1 trouble free until now. I updated Companion latest v2.2.2 RC, downloaded v2.2.2 firmware. DFU is loading OK, however, when I attempt to "Read firmware from radio&quo...

Hi all,I'm snookered regarding two MP3 files I need to generate for my Tx.
If there are any heli pilots here, maybe you could advise me as to what "gyrhh.mp3" and "gyrrate.mp3" are meant to say.

TIA for any pointers. Mike.

Thanks for the heads up Kalle,just have to get my grubby paws on one.

I've not got the flying wing I intend using it in yet, I heard they are designed for fixed wing only. I'm up to my ears in another project at the moment.