openrcforums

Ok, I'm blind....
It's now working... I was not used to the options...my fault, i haven't searched in the right place in companion.

Thank you for the help Kilrah.

Laurent

No specific options only standard software for both ones.

V1 Turnigy 9x the main board has a soldering plot at wrong place to add the usb connection.

The inversion works on er9x V1.442-MIKE SUN:ER9X-R818

latest try on open tx was on the v2.1.3 fr.

I've tried threw companion as I haven't managed to modify this point on the radio directly.

You're right, but I'd like to find if I haven't done something wrong before annoying the developers.

Envoyé de mon HTC One mini en utilisant Tapatalk

Thanks, i'll try this if I don't get any more answer until tomorrow.

Envoyé de mon HTC One mini en utilisant Tapatalk

My topic is not the right way to do it?

Envoyé de mon GT-I8190 en utilisant Tapatalk

Yes it has, but it's not working... here is my problem.

Solution found on the french forum of the Taranis.

i'm using a X8R in the external module bay connected to a turnigy 9x with a DHT module.
It works nice in the living room. As soon as the weather will be matching some free time, i'll test this outdoor.

Ask if you want som informations.

Laurent

Hi All. Due to a bad pot on my trunigy 9x, i have replaced the gimbals of my Taranis (A01 version 2013) by new ones, the original gimbals of the taranis have been succesfully integrated in my 9X V1. The fact is that the right horizontal and the left vertical are inverted, the only software able to d...

Hi all, I must be blind or somethinf like that, but unless many times trying to search the right information, i'm was still unable to find what i'm looking for. I would like to know how to plug an X series receiver in the external module bay of the taranis to use the sbus wireless trainer option fre...

Hello All. Due to a bad aileron pot in my 9x, i've ordered a pair of new frsky PR10 gimbal for my Taranis, and put the original ones in my 9x. Physically everything went fine, the gimbals are in place, cables soldered and calibration done. As i've read on this subject i have two channels inverted (A...

@ Kilrah I have a 2 sec delay up/down in the mix of output 14 and a 7sec slow up/down on the related flight mode and it gives a strange behaviour. On the same plane, the spoilers also have a 2sec slow up/down on their outputs ( 7 & 8) and a 2sec slow up/down on the related flight modes and i do ...

Just upgraded my Taranis to open tx 2.0, the problem is still there.

Laurent.

Envoyé de mon HTC One mini en utilisant Tapatalk

Hello all. While trying to use flight modes on my warbirds to set the right trim on the elevator to match the various effects of the flaps and the landing gear, i've discovered a conflict between the "slow motion" of the flight modes and the Mixer delay function. As i have a electric retra...

Thanks Kilrah!
That's exactly what I need to have a 9x as pupil/spare transmitter with my Taranis.


Envoyé de mon HTC One mini en utilisant Tapatalk

It's a shame... Is there a similar tool for 64pins processor. I'm not really fan of soldering on the radio mainboard...

Envoyé de mon HTC One mini en utilisant Tapatalk

Hi all.
Is this tool working for flashing a HK 9X?
Thanks for your answers.
Laurent

Envoyé de mon HTC One mini en utilisant Tapatalk

Hello Kilrah, There was a test of the Taranis in a french Magazin in november. In the test, the autho states that the tie-rap (colson) holding the cable near the potentiometers were altering the gimbals displacement and smotheness. Yesterday morning, i've removed thos tie-rap and the centering issue...

Thanks Rob.

It's now working fine
Due to the little centering issue, i've reduced the "dogleg" value to +2% ans -2%.

The issue i had on companion was due to a wrong curve setting left only on aileron stick. So there is no need now to copy my eeprom

Fine. Thanks for the help.
I'll test that this evening.

By the way, on companion, on the same plane program, i still have an issue while activating the function, but only on ailerons this time.

Envoyé de mon GT-I8190 en utilisant Tapatalk

Just a question regarding this function :

Is it normal that the trims are modified by the function without touching the sticks?
It happens on Rudder/Elevator/Aileron on my Taranis, only on Ailerons on the same model program on comapnion9x.

Hi Rob.

After having begibnning trying to implement your solution, i must say that i am not sure to understand this :

"But put in a small dog leg to flatten in the middle".

Could you please show me with a screen copy on companion9x?

Thanks in advance.

Laurent

Thanks Rob.
I 'll test that this evening.

Envoyé de mon GT-I8190 en utilisant Tapatalk

Hi all.

I've activated this fonction on my Taranis.

But, i have a light centering issue on my gimbals.

It seems that the centering issue is affecting the instant trim.

Except changing the gimbals, is there another option?

Envoyé de mon GT-I8190 en utilisant Tapatalk

Here is the firmware version. I've found where it has gone wrong. On models created on the older firmware, the value is setted up at 0u as default. When the value is modified once, it's not possible to set it up under 100u. On newly created models, value is setted up to 300u as default. Envoyé de mo...

Thanks Kilrah.

In companion, i confirm that the defaukt value is 100.

But, on my Taranis, default value is 0.



Envoyé de mon GT-I8190 en utilisant Tapatalk

I've found while testing some différent issues.

There is now another setting after the ms... it was setted up to 0u as default. Setting it to 100u, servos srarted moving.

What may be the best setting for me between 100u and 800u?


Envoyé de mon GT-I8190 en utilisant Tapatalk

Hi All! I'm experimenting a strange behaviour of my HFMG-3 multiplex-Jr module. When receiving my Taranis early september, i've first programmed my funcub on it. I was using the external module with my HFMG-3 multiplex without any issue. The Taranis was setted up on external module only, external mo...