Search found 47 matches
- Wed Oct 26, 2016 6:45 pm
- Forum: RF MODULES
- Topic: Orange Module running MULTI protocol
- Replies: 685
- Views: 427757
Re: Orange Module running MULTI protocol
Hi all together! i tried to flash my Orange Module from the first batch (with the second channel issue) with my Taranis X9E using the Ersky9x maintenance menu. I used the P12 connector on the Taranis X9E Board. I connected like the Taranis PDF from the first post http://openrcforums.com/forum/downlo...
- Mon May 02, 2016 12:55 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: IMU6050 understanding
- Replies: 7
- Views: 7028
Re: IMU6050 understanding
I think the (calibrated) sensor values would be fine.
At least for me.
At least for me.
- Mon May 02, 2016 9:05 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: IMU6050 understanding
- Replies: 7
- Views: 7028
Re: IMU6050 understanding
Thanks for clarifying. Will test more in the evening.
do you think we have enouph memory to have the options to send the Accelleration of the three sensor axis in G via AccX AccY and AccZ
do you think we have enouph memory to have the options to send the Accelleration of the three sensor axis in G via AccX AccY and AccZ
- Sun May 01, 2016 7:26 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: IMU6050 understanding
- Replies: 7
- Views: 7028
IMU6050 understanding
i have build an Openxsensor for testing IMU6050 made the calibration via serial monitor #define ACCX_SOURCE PITCH gives me Acceleration on X axis (about 8,90 to -8,90) #define ACCY_SOURCE ROLL gives me Acceleration on Z axis (about 8,90 to -8,90) #define ACCZ_SOURCE YAW gives me yaw Angle (+180° to ...
- Sun May 01, 2016 3:44 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Tried again with delay.
delay(3000); in line 429 (openxsensor) solved all my problems.
Thanks to all for help
delay(3000); in line 429 (openxsensor) solved all my problems.
Thanks to all for help
- Sun May 01, 2016 9:39 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
i have bridged the diode
Looks like the genuine Arduino pro mini doesnt have this diode
Now using GPS on VCC,GND,RX at Programming header and Pin6 via 10k resistor.
Looks good now
Looks like the genuine Arduino pro mini doesnt have this diode
Now using GPS on VCC,GND,RX at Programming header and Pin6 via 10k resistor.
Looks good now
- Sun May 01, 2016 8:08 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
Shame on me, found out that my pro mini doesnt provide 5V on VCC pin on the front side. Is the VCC pin on the programming pins only useable for programming the arduino? i`m a arduino noob The other VCC pin on the arduino gives 5V... Connected GPS to raw i works.... edit: found out that there is a re...
- Fri Apr 29, 2016 7:52 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
I opened the gps yesterday (antenna is about 20x20mm) desoldered the rf shield and resoldered the antenna. No difference.
In the moment the cheap ublox lays powered up in the garden, while im @ work
Hoping it catches some data and store it...
In the moment the cheap ublox lays powered up in the garden, while im @ work
Hoping it catches some data and store it...
- Fri Apr 29, 2016 7:10 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
After WHAT time, please? 15m after powering up the gps in clear sky How much dB do you get @ the gps signals? @Kalle Which one does perform better? CRIUS CN-06 or GY-GPS6MV2 i`ve ordered a Ublox Neo7M to compare. Looking forward to it http://de.aliexpress.com/item/Mini-Ublox-Neo-7M-GPS-with-Compass...
- Thu Apr 28, 2016 6:09 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
@ mstrens
Which GPS do you have. And are you satified with this?
Which GPS do you have. And are you satified with this?
- Thu Apr 28, 2016 4:28 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
I found this on google
Mine looks this way (under clear sky) Very weak i think
Tested u-center for android
on the same Table in my garde my Sony Xperia have a fix in 5 seconds
Mine looks this way (under clear sky) Very weak i think
Tested u-center for android
on the same Table in my garde my Sony Xperia have a fix in 5 seconds
- Thu Apr 28, 2016 4:14 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
We got live jim
I took my 20m USB extensions and put the Ublox 7 on a table in the garden completely free sky.
I got a fix after 15min 5 Sat fixes between 22 and 29 dB visulaized in U-center.
Do you have the same weak signals?
Anything i can try?
I took my 20m USB extensions and put the Ublox 7 on a table in the garden completely free sky.
I got a fix after 15min 5 Sat fixes between 22 and 29 dB visulaized in U-center.
Do you have the same weak signals?
Anything i can try?
- Thu Apr 28, 2016 11:03 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
My Uno should arrive in the next few days....
Do i have to worry about resistors when using the gps with my pl2303 serial adapter?
Do i have to worry about resistors when using the gps with my pl2303 serial adapter?
- Thu Apr 28, 2016 9:50 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
Thanks for help
@Kalle
this is not the "problematic" one
I`ll test U-Center later
testet in and outside @ the window
waitet 10 Minutes
@nigel
Blue Wire to 10k on Pin 6 ?
@Kalle
this is not the "problematic" one
I`ll test U-Center later
testet in and outside @ the window
waitet 10 Minutes
@nigel
Blue Wire to 10k on Pin 6 ?
- Wed Apr 27, 2016 11:51 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS sensor
- Replies: 418
- Views: 212153
Re: GPS sensor
Cant get GPS working Debug says openXsensor starting.. milli=0 freeram=946 vario is setting up.. vario is up.. END of GPS setup FRSky Output Module: TX Pin 4 Sport Protocol =1 End of general set up My GPS: http://www.aliexpress.com/item/Ublox-7-series-N32-GPS-for-Mini-NAZE32-Flight-Control-Board-QAV...
- Wed Apr 27, 2016 7:01 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Did more testing with the strange Gy-86 mounted on a new arduino @jhsa Sometimes Vario is working from first second. Reset Button helps every time.... @mstrens is it hard to implement a reset of the ms5611 in void setup ? edit: ive build a third openxsensor with a GY-86 and sometimes the vario doesn...
- Wed Apr 27, 2016 11:26 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
2.17
In The moment i`m using faktor 0.1 in config.h from openxsensor for A3 and A4
In The moment i`m using faktor 0.1 in config.h from openxsensor for A3 and A4
- Wed Apr 27, 2016 8:08 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Thanks for help
@mstrens
Where do you think is the best place in code to implement the divider (10) for A3 and A4 ?
@mstrens
Where do you think is the best place in code to implement the divider (10) for A3 and A4 ?
- Wed Apr 27, 2016 8:06 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
I`ve tried already OXS 5, same behavior
I build a second one this morning, new (the same charge) arduino, and new GY-63
Works from the first second.
When my Arduino Uno arrives, ill disassemble the components and test the GY- 63 on the breadboard
I build a second one this morning, new (the same charge) arduino, and new GY-63
Works from the first second.
When my Arduino Uno arrives, ill disassemble the components and test the GY- 63 on the breadboard
- Tue Apr 26, 2016 6:41 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Did some more testing It has nothing to do with debug on or off. If Arduino TX and Gnd are connected to USB2Serial Adapter, every boot is successfull. (message "Vario is up" on serial monitor@115200) If Arduino TX and Gnd are not connected to USB2Serial Adapter, every first boot fails for ...
- Tue Apr 26, 2016 4:18 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Delay(1500) doesnt help (Tried yestersday)
I ll test with the right baud rate later
I ll test with the right baud rate later
- Tue Apr 26, 2016 1:29 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
For now CSB Pin is connected to GND
- Tue Apr 26, 2016 1:13 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
hmmmmm suspect in the serial window i see this 6^›.}—ñÓ‚ £ÓV‚—“'+)_À:YÌ’‚Ñ*ÒÜÿ@ãxM/ÿ¨Ö“Úš£rð0Sl¯Í—_ÀiA£ mÜ “Á&Á/d$ when powering up. Is my 2303 Serial Adapter bad?? But more strange....with the debug option set in config.h vario works like a charm ??confused?? My config.h.... // OpenXsensor ht...
- Tue Apr 26, 2016 10:34 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
Re: ms5611 power up issue
Input Voltage from s.port to arduino pro mini and ms5611 both hooked to raw pin
Both power leds solid (arduino and GY-63)
Testet with NiMh 5,95V
Both power leds solid (arduino and GY-63)
Testet with NiMh 5,95V
- Tue Apr 26, 2016 8:04 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ms5611 power up issue
- Replies: 21
- Views: 13684
ms5611 power up issue
Hi I have build an openxsensor. Arduino pro mini clone 5v 16mhz GY-63 ms5611 Openxsensor newest master version form github (v7) Receiver is X8R wit EU LBT Firmware. if i power the receiver and the OXS at the same time, then there is no Vario Data working (Voltage reading from A0, A1, A2 works) if i ...
- Thu Apr 14, 2016 10:47 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXsensor running on Mega 2560 R2 ?
- Replies: 2
- Views: 3180
Re: OpenXsensor running on Mega 2560 R2 ?
Does not run on Arduino Mega.
My Unos and Minis arrive from the East. They work like a charm.
With a little trimming her and there, an old orange case is the new home of the Arduino Mini
Waiting for the baro sensor.....to be placed on top of the mini in the case
My Unos and Minis arrive from the East. They work like a charm.
With a little trimming her and there, an old orange case is the new home of the Arduino Mini
Waiting for the baro sensor.....to be placed on top of the mini in the case
- Sun Apr 10, 2016 7:07 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXsensor running on Mega 2560 R2 ?
- Replies: 2
- Views: 3180
OpenXsensor running on Mega 2560 R2 ?
Hi
i´m new in arduino and openxsensor.
i,ve ordered arduino minis and barosensors in china.
in the meanwhile i tried to test OXS on my old Arduino Mega 2560 R2
Schould this run with this peace of hardware?!?
Cant get it to work...
i´m new in arduino and openxsensor.
i,ve ordered arduino minis and barosensors in china.
in the meanwhile i tried to test OXS on my old Arduino Mega 2560 R2
Schould this run with this peace of hardware?!?
Cant get it to work...
- Tue Apr 05, 2016 6:58 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: s.bus instead of PPM in
- Replies: 10
- Views: 6883
Re: s.bus instead of PPM in
thats right...
i suggested to use s.bus instead of ppm.
Mstrens answered that s.bus as input on openxsensor is hard to implement and it would better to use bidirektional s.port...
so i think no mistakes on my side...
i suggested to use s.bus instead of ppm.
Mstrens answered that s.bus as input on openxsensor is hard to implement and it would better to use bidirektional s.port...
so i think no mistakes on my side...
- Mon Apr 04, 2016 10:46 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: s.bus instead of PPM in
- Replies: 10
- Views: 6883
Re: s.bus instead of PPM in
Hi Kilrah
Hats up for your work
i`m sure all of us do mean s.port aka Smart Port
Do you have in mind to support such an uplink feature in the future?
Hats up for your work
i`m sure all of us do mean s.port aka Smart Port
Do you have in mind to support such an uplink feature in the future?
- Sun Apr 03, 2016 7:55 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: s.bus instead of PPM in
- Replies: 10
- Views: 6883
Re: s.bus instead of PPM in
That were a great feature for sure..
Dreaming again......an arduino only connected to sport. Giving various telemtry and control things like controlling openxsensor, trigger lights , a glow plug heater or other things with no need for a servo
Dreaming again......an arduino only connected to sport. Giving various telemtry and control things like controlling openxsensor, trigger lights , a glow plug heater or other things with no need for a servo