R22 is 100 ohms.
Left side of the R22 is connected to PC13 (resistance 0.2 ohms).
Right side of the R22 is not connected to pot middle / J3 pin 2 (resistance 2.5 Mohms).
The A9 value should change when you move the pot. 1. Measure the voltage between GND and the middle connection of P4 with the pot in different positions. It should go between 0V and 3.3V. 1.67V in middle position 0.1V and 3.17V in end positons 2. Repeat measuring between GND and the connection on t...
I removed R83 and R90, R22 is on the board (I added it a few months ago). I connected middle wire from P4 (taranis slider) to J3 pin 2. I connected left and right wire from P4 to GND and VCC (from P3). I chose P4 - AD10 in the hardware menu (the only available option). In DiagAna menu A9 is mostly 0...
How to fit Taranis Gimbals to a 9XR-Pro chassis. Part 1 is just the wiring. I would like to say right at the start that there is no angst in this process, there are no special skills involved, no soldering and glue to contend with, this should be a straightforward job which can be completed in an e...
On er9x, here is what they do. ------------------------------ Description of GVARS in er9x, 04 Mar 2013 GVARS may be used in a number of places. 3. EXPO and Dual Rate. The expo and dual rate values may be set to use a GVAR. This allows the values of these to be adjusted in flight. How can I set dua...