openrcforums

I agree walkers has pretty good hardware. I have devo 8 for hacking. My buddy ask me to port my DIY MCPX firmware to 120vd02. I just find out walkera 3 in 1 has cyrf6936. Which means walkera protocol is implement in the MCU. The DIY 3 in 1 firmware can make it support DSM as well. That is pretty ex...

What about this? It's even cheaper! I like the idea of flying a plane by stretching my arms out and flapping them to make it go faster.

The craziest thing just happened. It seems like it fixed itself overnight!! No idea how, but she works now! I guess I had two problems, first the jitteriness from the Orange module and then some unknown issue with the radio. But all is good now I guess.

I'll try hooking it up to my computer using SmartPropoPlus to see if it's outputting correctly as I don't have another radio. Thanks for the idea!

Have you used your radio successfully with any model before? Have you checked on the home screen and on the ANAS page that the sticks and outputs actually respond? Yes, every stick responds and I have calibrated it several times successfully. It hasn't worked with any models before and I can't test...

I think I will take a break and resume my headscratching tomorrow afternoon. I will post my settings etc. I'm becoming worried it might be something to do with the radio, although I don't know how that would happen. It's certainly not something I did since it has always had this problem, but it does...

I did switch it to DSM2 mode after putting in the LP4DSM and it bound with the mSR but had the exact same issue as before, but no littering anymore. I had tried the external module with my foamie but the same issue was present so I have not idea what the problem could be. I am still having the same ...

Today I basically said screw it and wired in my LP4DSM module. I still have the exact same issue. I really can't imagine what it could be now, and it's really frustrating.

Kilrah wrote:Starts to sound like a defective module...

Yeah, I'm about ready to talk to HK about getting a refund...

Update: I've bound my 9x with my Vector foamie with an Orange R610 and the results are the same: jittery servos, and no throttle response. At least this time the channels are being controlled by the correct inputs, which is weird because I used the same settings as I did with the mSR. No channel num...

hmm. I have an MCPx and it uses more than 4 channels internally. Maybe set that back to 8 channels. Something else to consider. Some of the models floating around here for dsm equipment were probably made for the home brew dsm module, which uses the dsm protocol of the 9x. The orange module would n...

I just flashed my 9x to Open9x and my mSR X still isn't playing nice with my Orange module. I have the latency set to 19.5ms at 4 channels and 300u (whatever that means). I can only control two of my channels, elevator and aileron, which are being controlled by the throttle and elevator sticks respe...