openrcforums

Rob Thomson , when U say : Swap the outer two leads on the rudder pot? http://magicmojo.webs.com/apps/photos/photo?photoid=190144621 THE IMAGE DID NOT LOAD :oops: ANYWAY HERE'S THE LINK (SAFE I ONLY USE THAT SITE TO LOAD PICTURE FOR RC FORUMS) http://magicmojo.webs.com/apps/photos/photo?photoid=1901...

The update should fix a Backlight display on the LCD that just aint to bright or only appears when i click a selection buttons. i a smartiepart board. Ill look further into it if it not fixed but the update.

If so ill make a new topic about it.

Sorry, i took almost 48 hrs to respond, got real busy with work. Ill go with the hardware solution first , thnx Rob Thomson. It should not be to hard to swap to wires. Second i update my firmware version, now i'm still at r-767. thnx, Mike B. Third, ill do any setup &/or tweaks, if necessary. :)...

i needed to change Left transmitter gimbal on a 9X in mode 2,
but i only had a Right one on my spare part 9x.
I've set throttle to work and display properly but
the Rudder is still un-reversible.

Been quite busy for a while so i kinda forgot some basics. LOL

Any Solution ?/

i was skeptical with such a simple answer but , IT WORKS !!!

And i Talk U Mucho Kilrah

19 Novembre 2012, 12:31 AM ER9X + Assan GA-510 Gyro issue hi guys, i had to change my gyro on my Align T-Rex 600 ESP, i now installed the Assan GA-510 Tail Lock LCD Gyro , Before the gyro work perfect with the 9X original firmware but not with ER9X, due to the fact that it doesn't have the Gyro Sens...

Hi guys,

i changed my gyro on my Align T-Rex 600 ESP. now i installed the Assan GA-510
Assan GA-510 Head Lock Gyro

** THIS POST WAS ONLY PARTIAL, THE FOLLOWING IS THE COMPLETE POST **

So i went on Analog Inputs (5/6).
Adjusted to 7.4V, my first glimp at the voltage display on the
9x said 7.3V, but my tester said 7.46V so i've cut in between.

Problem & Question SOLVED

i THNK U

Thnk U 4 a simple & accurate answer

i ll try that right away...

Malcurin wrote:and more Frsky ones to come, I get $200nz a week to spend on the hobby ATM Muwahahaha i love my new Job

WOW A dream job lol.

Supa...new codes

THNX

LOL , ok i'll go buy me some thick glasses..
to feel smarter.

Then HALF will perfect for my flaps


Thnx Gentlemen

jhsa wrote:MAX was replaced with HALF a while ago.. they are the same thing.. only the name changed..

Joäo

i tough it might be FULL but HALF

While recharging my battery 2s battery, i decided to use a 3s to continue mixing on the 9x. Before putting the 3s in i tested the voltage to compare with 9x, here: Turnigy battery voltage tester : 10.86V Align multi-tester : 10.85V Thunder Power balance-charger : 10.88V 9x displayed voltage : 9.6V W...

Kilrah wrote:YAY

NICE

Maybe this can get you by until the admin decides to ?reinstate? the graphical icon for color tags. You can manually wrap your text in the 'color' bbcode http://area51.phpbb.com/phpBB/faq.php?mode=bbcode Hello LOOK AT ME! [color=red]Hello[/color] [size=200][color=red][b]LOOK AT ME![/b][/color][/siz...

Thnx ♪♫♫♪♪♫♪

in ER9x r767 , page 5/10 MIXER;
select a MIX, click on it to EDIT MIX,
in Source i don't see the value "MAX"
just after P3 now it show HALF, FULL
but NO MAX

Why?

A few weeks ago we could add colour to the text,
now with the new version of the text editing tool
we can do it anymore or i haven't found a way.

It was a great highliting feature, very useful for
emphasizing on key parts of a text.

i''ve always been MODE 2 flyer. i know the 4 stick modes. The issue was because i wasn't making the distinction between "stick order and channel order". Mojo <DUH But like Jhsa explained above the obvious distinction it's all clear now. I'm very confident that my next channels should be di...

I don't know if this answers your questions but I'll say it anyway. In er9x you have 2 different things.. Stick order (mode 1, 2, 3 and 4) and channel order. When you select the mode you are telling the radio where you want the controls to be.. example: mode 2 you have throttle and rudder on the le...

So i see there is very few chances of catastrophe,
there's a very easy way to correct more possible issues,
if ever it would happen.
thnx

Well Explained
i THNK U

OK i got it, but i might sound ignorant, what do U mean by fuses in the 9x ? So i checked Fuses? , the fuses are a protection mechanism in the processor .... Ok i just need a few examples of fuse programming in common operation on the 9x. Why, cuz when i'm tired and i bring in my room this very lapt...

i posted that in :
Board index ‹ Software ‹ eePe

Yes you're right calibration & recalibration made it ok
at that time when i created a MIX.
EVEN IF PAGE 5/6 ANA SHOWS PERFECT CALIBRATION.(foto under)

i replied this on a post of mine this earlier tonite... Re: incorrect channel dispaly by MojoMaestro » Thu Aug 02, 2012 12:43 am Has posting this... i turn my 9x on [ALL IS OK] 1.I'm creating MODEL 01a, keeping the MODEL 01 like a template cuz i see it's all clean.Done. I turn off the Tx & turn...

ShowMaster wrote:I'm glad you're ok now.


ShowMaster
Sent from my iPod touch using Tapatalk

Not really read upper comment
refering to (see topic) Re: incorrect channel dispaly

We would like to know how you fixed it so we can add it to our info toolbox. It doesn't matter how big or small the fix is, it's what you did. Thanks ShowMaster Sent from my iPod touch using Tapatalk i moved down from version r768 to r767, all was good untill Thu Aug 02, 2012 12:43 am... (see topic...

A short while a go we could put mentions like these in the title of a post. [PROBLEM] , [QUESTION] etc. i think that was helping focus on the type of topic and demonstrated the Urgency of that same topic. Earlier i made a new topic and i had to write [QUESTION} because i wanted people to see it cuz ...