openrcforums

Logical switch page, switch L whatever, first box a<x (less than) second box Alt (you need to have discovered the sensor first), next box whatever height you want the switch "on" at. Next Special functions page, switch L whatever you used, then play track, then what track you want to play ...

I'm thinking it could be good to have a snap roll initiated solely by the aileron stick, so say ailerons behave as normal up to 75% of stick travel then past that point rudder and elevator kick in, not sure if this should be gradual or like a switch or switch straightaway to say 25% elevator and 50%...

Hi Mike,

Just for completeness, downloaded the correct 9XR-PRO file, loaded it on to the SD card and re flashed it and the screen has stayed perfect so now on the right software with a perfect screen

Thanks

Phil

Update to the above, if I download the ersky9x for the sky board and load that on to the 9X board I get the optrex display on off option, turning it off, as you rightly say now removes this error and I have a perfect display. As I understand it the Sky board and Pro boards are essentially the same t...

Thanks Mike for the quick reply, I thought that as well (only because previously on flashing a 9X it flashed with it off and got the same sort of thing, however I have two radios, a 9X which does have an optrex display and the 9XR-Pro which obviously doesn’t. Both radio’s are using ersky9x-r217 mod ...

Something very strange has happened to my screen (this is a 9XR-PRO by the way), it isn’t a disaster but it’s annoying the hell out of me. As you can see in the photo below the text on the screen has moved left cutting the first part of the display off (the name of the plane is actually an Angel) an...

Part two The hardware We need to lose the “ears”, when you cut, grind or sand these of leave a little meat round the outside edge as we are going to subsequently enlarge the four inner holes. 10 Need to lose these ears.jpg The “ears” that have to go have been sanded of with a dremel in this picture...

How to fit Taranis Gimbals to a 9XR-Pro chassis. Part 1 is just the wiring. I would like to say right at the start that there is no angst in this process, there are no special skills involved, no soldering and glue to contend with, this should be a straightforward job which can be completed in an ea...

I can also confirm that the Taranis gimbals which are adjustable for spring tension DO fit the 9XR Pro, and very easily, much easier than putting Aurora gimbals in the 9X case, no soldering or glue is required.

I'll be posting some pictures and guidance in the next couple of days.

Phil

Hi Mike, Thanks for the quick answer but as far as I can see this all relates to a 9X case. I’m putting these in a 9XR Pro case which is quite a lot different, it actually looks as if it might be easier but difficult to tell until I try. I was hoping that someone had actually successfully achieved t...

Hi João, Just for compatibility I’ve bought a second one so like you will have one in each radio and likewise in a 9X with a skyboard and a 9XR Pro, both now running the same (r217) of ersky9x which helps as they now look the same. “Do you know you can connect your radio to eepskye via bluetooth, an...

Has anyone changed over the gimbals on either the 9X or the 9X Pro? I can get either the Aurora 9 Gimbals or the Taranis Gimbals but without actually having the Gimbal in hand to measure and try it isn’t easy to see which would be the best/easiest to convert to. It would seem to me (I have measured ...

First one definitely works as that is the one I have at the moment but only to transmit one way. So, at that price I ordered the one from China anyway.

Thanks again, much appreciated.

Phil

Hi João, I've already bought this one which says it's a transceiver but doesn't say whether it can be master and slave, is that the wrong one? Bluetooth adapter I could get this one instead if this is right though. HCO5 Adapter I do have to say I'm not sure it would get used a lot but it would certa...

That makes sense as when the board was built if my memory serves me correctly the XJT series didn’t exist so I simply followed all the instructions and presumably it didn’t need the option of which port to use. All works and looks good now with the wire going in to the back of the case next to the m...

Hi Mike, Rather sheepishly no I didn’t, it never worked out of the box and although I’m pretty sure I upgraded to the latest ersky9X version I then followed all the details from the SKY Board TX which has com port value as 1 in that menu (and has always worked flawlessly). Having just changed it to ...

Hi Mike, you are absolutely right, it should, but unfortunately it doesn’t, either with the cable in the Futaba socket or bypassing the socket completely with a servo extension from the DJT RXD and TXD pins directly to the RXD and TXD pins on the board. It isn’t the DJT as that same DJT works in the...

Hi Mike, Thanks for the quick answer, it seems to me a no brainer at only £20.00 to get a spare DJT module anyway in case that’s the part I might break in my main TX system, in fact I ordered it about an hour before I read your reply and funnily enough from the same place you suggested. The other tw...

Sorry if this is a bit of a basic question but I have a TX with a Sky9X board transmitting through a DJT module to various D8R-II Plus receivers. All of which is absolutely perfect and I wouldn’t change it for the world. However as I fly in competitions sometimes many miles from home I really need a...

Re "i just inserted a CR2032 battery into the battery holder of the sky9x v3, but unfortunatly the date/time always starts again and again from the time I set on my 9x when I power on the Transmitter. I am using open9x for sky9x. Anyone else having this? is this an issue of open9x or the hardw...