Search found 82 matches

by ckleanth
Mon Aug 07, 2017 8:49 am
Forum: openTx
Topic: MiniHub+ - S.Port Telemetry Hub for Frsky Radios
Replies: 4
Views: 4753

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

MikeB wrote: Mon Aug 07, 2017 8:42 am If you can spare one, I'll test it out.

Mike.
Pm me your address mate. I will make one and send to you
by ckleanth
Mon Aug 07, 2017 8:17 am
Forum: openTx
Topic: MiniHub+ - S.Port Telemetry Hub for Frsky Radios
Replies: 4
Views: 4753

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

MikeB wrote: Sun Aug 06, 2017 7:53 pm Why only for openTx? If it uses the SPort, why won't it work with ersky9x?

Mike.
not tested it mike. It should but I'm not using ersky9x. Can I send you one to try?
by ckleanth
Sun Aug 06, 2017 5:41 pm
Forum: openTx
Topic: MiniHub+ - S.Port Telemetry Hub for Frsky Radios
Replies: 4
Views: 4753

MiniHub+ - S.Port Telemetry Hub for Frsky Radios

MiniHub+ - S.Port Telemetry Hub for Frsky Radios I predominantly fly gasoline engine powered planes so it is important to me to use a device that work with the standard Tachometer leads from most gasoline engine ignitions. In addition monitor onboard voltage and engine temperatures. This is what the...
by ckleanth
Fri Jan 08, 2016 2:47 pm
Forum: 9Xtreme upgrade board
Topic: eepskye editor and the eepe editor
Replies: 9
Views: 7434

Re: eepskye editor and the eepe editor

Mike would be possible to have a chat with bernard andre and the other guys and agree on a eepe/eepskye and opentx structure or some method to distinguish between the three ?
by ckleanth
Fri Jan 08, 2016 11:56 am
Forum: 9Xtreme upgrade board
Topic: eepskye editor and the eepe editor
Replies: 9
Views: 7434

Re: eepskye editor and the eepe editor

yea copy and paste works thanks.

Mike would it be possible to have a model converter (or eepkeye to be able to open and convert opentx model files) ?

thanks
by ckleanth
Fri Jan 08, 2016 11:12 am
Forum: 9Xtreme upgrade board
Topic: eepskye editor and the eepe editor
Replies: 9
Views: 7434

eepskye editor and the eepe editor

right, I've found some of my old models done in eepe. I have two software installed in the eepe editor folder the eepe and the eepskye. The eepskye editor wont load any opentx eppe or model files done in the eepe editor. also if I have the eepskye editor and the eepe editor I cant drag and drop mix ...
by ckleanth
Wed Jan 06, 2016 2:00 pm
Forum: 9Xtreme upgrade board
Topic: eePskye - 9XExtreme
Replies: 2
Views: 3356

Re: eePskye - 9XExtreme

jhsa wrote:You should have an option called "9xtreme" in the preferences..

João
this is what happens if you install the new eepsky in the old eepe directory

:lol:

thanks
by ckleanth
Wed Jan 06, 2016 1:37 pm
Forum: 9Xtreme upgrade board
Topic: eePskye - 9XExtreme
Replies: 2
Views: 3356

eePskye - 9XExtreme

Right. I got the latest Eepskye (editor) for 9XTreme board software for Windows and Linux Operating Systems [at the bottom right of the page - NOT ON THE LEFT] from http://www.er9x.com/ the eepe editor release notes is er9x rev 811 but the about page is revision 419 October 25 2015. I may be slightl...
by ckleanth
Tue Jan 05, 2016 2:01 pm
Forum: 9Xtreme upgrade board
Topic: Complete Noob Help Wanted
Replies: 12
Views: 8467

Re: Complete Noob Help Wanted

With the move from googlecode to Github, and other things, I haven't been getting 'proper' releases out. I'm trying to get that sorted now. I hope to get everything out as a release very soon, then do later releases more frequently with only a few changes from the previous release. Mike. Appreciate...
by ckleanth
Tue Jan 05, 2016 1:59 pm
Forum: 9Xtreme upgrade board
Topic: OpenTx suppport
Replies: 10
Views: 7670

Re: OpenTx suppport

For information, the 9Xtreme is more of a new design rather than a re-package of existing designs. It uses the STM ARM processor, the same as the Taranis while the SKY board uses the Atmel ARM processor. Since both ARM processors include a USB interface, there is no original SP board implementation...
by ckleanth
Tue Jan 05, 2016 12:53 pm
Forum: 9Xtreme upgrade board
Topic: OpenTx suppport
Replies: 10
Views: 7670

Re: OpenTx suppport

Hi Mike, I started with er9x on my 9x, then I started using opentx and I liked it more.. I cant remember what was the exact reason but vaguely remember I had more options with OpenTx. I have already setup a model standard template with opentx with spoken telemetry, alerts etc and I'm sure pretty muc...
by ckleanth
Tue Jan 05, 2016 12:31 pm
Forum: 9Xtreme upgrade board
Topic: Complete Noob Help Wanted
Replies: 12
Views: 8467

Re: Complete Noob Help Wanted

OK, got the 9XExtreme board installed and the taranis gimbals sorted. everything seems to work with the stock 9XExtreme firmware. got the Voice pack for Ersky9X_16Khz.zip files got the latest Eepskye (editor) for 9XTreme board software for Windows and Linux Operating Systems [at the bottom right of...
by ckleanth
Tue Jan 05, 2016 11:54 am
Forum: 9Xtreme upgrade board
Topic: OpenTx suppport
Replies: 10
Views: 7670

OpenTx suppport

Steven, I've opened up a ticket requesting to port OpenTX to your board.

would it be possible to send a few boards to the guys?

https://github.com/opentx/opentx/issues ... -168816236

Thanks
by ckleanth
Mon Jan 04, 2016 1:56 pm
Forum: 9Xtreme upgrade board
Topic: Complete Noob Help Wanted
Replies: 12
Views: 8467

Re: Complete Noob Help Wanted

OK, got the 9XExtreme board installed and the taranis gimbals sorted. everything seems to work with the stock 9XExtreme firmware. got the Voice pack for Ersky9X_16Khz.zip files got the latest Eepskye (editor) for 9XTreme board software for Windows and Linux Operating Systems [at the bottom right of ...
by ckleanth
Wed Dec 09, 2015 4:31 pm
Forum: 9Xtreme upgrade board
Topic: OK, let's document this!
Replies: 74
Views: 35136

Re: OK, let's document this!

list or combine all useful hacks for the 9x for example the taranis gimbals guide byjhsa the reverse current protection and instructions how to do it (maybe add a components kit with the 9xExtreme since it was meant to protect for this) how to reroute the last pin for telemetrey on the rf board and ...
by ckleanth
Mon Nov 23, 2015 1:30 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 156319

Re: My 9Xtreme Installation

how about something like this
http://www.digikey.co.uk/product-detail ... ND/2642171
some hot glue and sugru to finish nicely
by ckleanth
Thu Nov 12, 2015 1:11 pm
Forum: Hardware
Topic: Taranis Gimals in a 9X
Replies: 542
Views: 272748

Re: Taranis Gimals in a 9X

jhsa wrote:I'm doing mine right now and taking pictures. If you can wait a little longer I will post it. You DO NOT NEED TO CUT ANYTHING apart from a very small piece of plastic. DO NOT cut the back board. It is NOT necessary..

João
that would be great. cheers
by ckleanth
Thu Nov 12, 2015 12:30 pm
Forum: Hardware
Topic: Taranis Gimals in a 9X
Replies: 542
Views: 272748

Re: Taranis Gimals in a 9X

gents, could someone summarize in one post what I need to do, what I need to cut, in order to fit the new version of taranis gimballs on the 9x with the 9xExtreme board? I can follow instructions and im ok with soldering but I'm no electronics geek... :) I was about to take mine apart to try and rem...
by ckleanth
Wed Nov 11, 2015 12:32 am
Forum: 9Xtreme upgrade board
Topic: Reverse Current Protection Mod for 9xtreme
Replies: 66
Views: 47543

Re: Reverse Current Protection Mod for 9xtreme

MikeB wrote:Exactly!
The 9Xtreme was supposed to have this feature, but we got it (slightly) wrong!

Mike.
cheers mike
by ckleanth
Tue Nov 10, 2015 11:22 pm
Forum: 9Xtreme upgrade board
Topic: Reverse Current Protection Mod for 9xtreme
Replies: 66
Views: 47543

Re: Reverse Current Protection Mod for 9xtreme

Gents, can someone explain why someone would do this modification? is it just to prevent damage from accidentally plugging the battery the other way round?
by ckleanth
Thu May 07, 2015 8:23 am
Forum: openTx
Topic: SPort device updating
Replies: 98
Views: 64721

Re: SPort device updating

Mike for the Taranis:
make PCB=TARANIS PCBREV=REVPLUS HELI=YES GVARS=YES LUA=NO_MODEL_SCRIPTS
is the standard build

thanks for including the maintenance mode
by ckleanth
Fri Apr 10, 2015 12:30 am
Forum: openTx
Topic: OpenTX 2.1 telemetry system preview
Replies: 283
Views: 317510

Re: OpenTX 2.1 telemetry system preview

As always thanks Mike.
by ckleanth
Thu Apr 09, 2015 2:09 pm
Forum: openTx
Topic: OpenTX 2.1 telemetry system preview
Replies: 283
Views: 317510

Re: OpenTX 2.1 telemetry system preview

Andre thanks for the clarification. Mike thanks, i picked up two from Richard. Btw re the analog to sport voltage sensor, can we use two of them now with opentx or not? There was some conflict with the internal ID's and i think you fixed this for both the sensor firmware and ersky9x but i wasn't sur...
by ckleanth
Thu Apr 09, 2015 10:48 am
Forum: openTx
Topic: OpenTX 2.1 telemetry system preview
Replies: 283
Views: 317510

Re: OpenTX 2.1 telemetry system preview

With the old D type rx's will we/can use the hub? It gets a bit confusing as sensors such as the current and cell voltage do not require a hub. Ideally i'd also like to get rpm info from a hall sensor (ignition) from my gas planes to display on screen. With the D type rx this information can be prov...
by ckleanth
Wed Jul 02, 2014 11:12 am
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

Cheers Scott
by ckleanth
Tue Jul 01, 2014 7:17 pm
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

guys, I thought had to learn how to do this photo to icon business... so I found suitable pictures with easy to remove background, attached in my link a two posts above I removed the background and replaced with white colour, then resize the picture with appropriate dimensions to have 2:1 ratio and...
by ckleanth
Mon Jun 30, 2014 10:28 pm
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

I like the background, but is there a chance you can get a shot of it which is more of a 2x wider than high so it will fit the 64 x 32 window we are working with. I could do that, but it would have considerable wasted space for the image and so with such limited pixel resolution would not look as g...
by ckleanth
Fri Jun 27, 2014 5:11 am
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

Cheers scott
by ckleanth
Thu Jun 26, 2014 6:16 pm
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

could a kind soul do the Aeroworks ProX260 for the taranis please? I like the background, but is there a chance you can get a shot of it which is more of a 2x wider than high so it will fit the 64 x 32 window we are working with. I could do that, but it would have considerable wasted space for the ...
by ckleanth
Thu Jun 26, 2014 12:11 pm
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 519
Views: 1079510

Re: Model Artwork for Taranis

could a kind soul do the Aeroworks ProX260 for the taranis please?

Go to advanced search