Search found 2336 matches

by bob195558
Sat Jan 14, 2023 11:16 pm
Forum: Hardware
Topic: Adding momentary switch to Taranis X9D
Replies: 2
Views: 221

Re: Adding momentary switch to Taranis X9D

Most of the switch upgrades were with the Turnigy 9x and 9xr radios.
I did a search and this turned up: viewtopic.php?f=7&t=5468&p=102745&hilit ... B2#p102745
May be a help for you.
by bob195558
Sat Jan 07, 2023 1:58 pm
Forum: 3D Printing
Topic: Upgrade to EZBoardV2 and Flashing EZFirmware (CR10 3D Printer)
Replies: 1
Views: 215

Re: Upgrade to EZBoardV2 and Flashing EZFirmware (CR10 3D Printer)

After Flashing the EEPROM needs to be reset.
Go to "Configurations" / "Reset EEPROM"
Will then hear a long beep and wait until the screen returns to the "Info screen".
by bob195558
Sat Jan 07, 2023 2:24 am
Forum: 3D Printing
Topic: Upgrade to EZBoardV2 and Flashing EZFirmware (CR10 3D Printer)
Replies: 1
Views: 215

Upgrade to EZBoardV2 and Flashing EZFirmware (CR10 3D Printer)

EZBoard V2_aa.jpg Upgrading from the older EZBoard lite V1.2 to the newer EZBoardV2 . See here for the install of the older EZBoard lite V1.2: https://openrcforums.com/forum/viewtopic.php?f=129&t=12346 See here an upgrade of the EZFirmware to the older EZBoard lite V1.2: https://openrcforums.com/fo...
by bob195558
Thu Jan 05, 2023 8:53 pm
Forum: Other Radios
Topic: Strange monitor display : RK Tx18S MPM radio
Replies: 9
Views: 997

Re: Strange monitor display : RK Tx18S MPM radio

Sorry I missed that part, thank you for pointing it out, good job.
by bob195558
Thu Jan 05, 2023 2:57 pm
Forum: Other Radios
Topic: Strange monitor display : RK Tx18S MPM radio
Replies: 9
Views: 997

Re: Strange monitor display : RK Tx18S MPM radio

Maybe try ERSKYTX (erskyTx for RK TX18S): http://www.er9x.com/
by bob195558
Thu Dec 22, 2022 3:31 am
Forum: 3D Printing
Topic: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)
Replies: 24
Views: 17312

Re: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)

Rim_Design_fb3_STL_a.jpg
RC Rim_Design_fb3_STL_a
Rim_Design_fb3_STL_a.jpg (139.88 KiB) Viewed 543 times



No one has asked for the 3D STL file for this RC rim, but I have posted it here
for download (Zip file), if anyone would like to try it for RC hobby use.

Rim_Design_fb3_STL.zip
Rim_Design_fb3_.STL file
(546.56 KiB) Downloaded 26 times



3D printed Rims_ RedCat Blackout Truck.jpg
3D printed Rims_ RedCat Blackout Truck.jpg (81.34 KiB) Viewed 542 times
by bob195558
Wed Dec 21, 2022 12:38 pm
Forum: openTx
Topic: Start/stop/reset built-in timers with Lua script
Replies: 1
Views: 215

Re: Start/stop/reset built-in timers with Lua script

What do you have for a Radio ?
Changing to erskyTx (was ersky9x) firmware will allow for more switches to be added.
by bob195558
Tue Nov 29, 2022 5:27 pm
Forum: 3D Printing
Topic: 3D Printing parts to make a Cyclone Dust Collector
Replies: 2
Views: 376

Re: 3D Printing parts to make a Cyclone Dust Collector

Here I assembled the 5 Gal Cyclone Dust Collector together, bolting the Intake and Exit 3D printed fitting to the 5 gal bucket. 5 Gal Cyclone Dust Collector_Intake_P.jpg 5 Gal Cyclone Dust Collector_Intake.jpg 5 Gal Cyclone Dust Collector_OUT.jpg 5 Gal Cyclone Dust Collector_ab.jpg 5 Gal Cyclone Du...
by bob195558
Tue Nov 15, 2022 8:22 pm
Forum: 3D Printing
Topic: 3D Printing parts to make a Cyclone Dust Collector
Replies: 2
Views: 376

3D Printing parts to make a Cyclone Dust Collector

Cyclone Dust Collector using 5 Gal Bucket that is mounted on the side of the bucket. ShopVac 2.5 Female Hose 5 gal buket Mount_bb.jpg ShopVac 2.5 Female Hose 5 gal buket Mount_cc.jpg I purchased a Central PNEUMATIC 40 LB Capacity, Floor Sand-Blaster Cabinet, through Harbor Freight. Watching several ...
by bob195558
Wed Oct 19, 2022 10:12 am
Forum: er9x
Topic: er9x setup for Blade Nano S3
Replies: 1
Views: 467

Re: er9x setup for Blade Nano S3

This maybe a help: viewtopic.php?f=5&t=6473
by bob195558
Sat Aug 27, 2022 10:51 am
Forum: 3D Printing
Topic: Starting and Ending G-codes for your Slicer (3D-Printer CR10)
Replies: 0
Views: 473

Starting and Ending G-codes for your Slicer (3D-Printer CR10)

Starting and Ending G-codes for your Slicer This is what I use in my Slicer (Simplify 3D V4.1.2) with the hardware-upgrades of my CR10 Printer . TH3D EZABL Starting G-codes: M75 ; Start Timer and Engage Filament Monitor G28 ; home all axes G29 ; auto level G4 S10; wait for heaters to recover G1 X0 Y...
by bob195558
Tue Aug 23, 2022 2:24 pm
Forum: 3D Printing
Topic: Installing TH3D Tough Direct Drive Heatsink Extruder with V6 All-Metal Hotend (Upgrading CR10 3D Printer)
Replies: 9
Views: 11320

Re: Installing TH3D Tough Direct Drive Heatsink Extruder with V6 All-Metal Hotend (Upgrading CR10 3D Printer)

Here is a link to 3D-Print the Filament Guide for the E3D Titan Extruder:
https://www.thingiverse.com/thing:45633 ... 2hedgl-nUk

.
TH3D Filament Guide TH3D E3D Titan.jpg
TH3D Filament Guide TH3D E3D Titan.jpg
TH3D Filament Guide TH3D E3D Titan.jpg (17.34 KiB) Viewed 1173 times
by bob195558
Thu May 26, 2022 11:21 am
Forum: UPGRADE BOARDS
Topic: Advice for modding a Turnigy 9x
Replies: 3
Views: 774

Re: Advice for modding a Turnigy 9x

Yes, your transmitter is still worth the time and effort to mod. What are you thinking you would like to upgrade ?
by bob195558
Sat Feb 12, 2022 12:15 am
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: MOSFETS BLEW UP in my UPS-CyberPower-1500

Hi João, Yes, I also have been thinking something else may have been the cause and because the MOSFETs are difficulty to find and with the cost. If they were to fail again, it may be better to use the cost toward a new CyberPower-1500. I was able to find a new CyberPower-1500 for $160.06 delivered. ...
by bob195558
Fri Feb 11, 2022 11:36 pm
Forum: 3D Printing
Topic: Designing with FreeCAD (3D Printing)
Replies: 4
Views: 2001

Re: Designing with FreeCAD (3D Printing)

The modded green air-dryer is works great !
New Air Filter compressor_hh .jpg
New Air Filter compressor_hh .jpg (181.25 KiB) Viewed 1757 times


Was able to get every thing together and is working very well.
The white suds are from the soapy water used to check for leaks.
New Air Filter compressor_gg .jpg
New Air Filter compressor_gg .jpg (173.72 KiB) Viewed 1757 times
by bob195558
Sun Jan 23, 2022 2:06 pm
Forum: 3D Printing
Topic: Designing with FreeCAD (3D Printing)
Replies: 4
Views: 2001

Re: Designing with FreeCAD (3D Printing)

Designed a small funnel in FreeCAD and 3D-Printing it.
FreeCAD Funnel_PaFC.jpg
FreeCAD Funnel_PaFC.jpg (56.11 KiB) Viewed 1912 times
Small Funnel_Pad.jpg
Small Funnel_Pad.jpg (81.86 KiB) Viewed 1912 times
by bob195558
Tue Jan 18, 2022 1:41 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: MOSFETS BLEW UP in my UPS-CyberPower-1500

Search for MOSFET:
SM6002N
WT49A

Have found this


SM6002N mosfet_express_technology_com_aa.jpg
SM6002N mosfet_express_technology_com_aa.jpg (81.3 KiB) Viewed 6367 times
by bob195558
Mon Jan 17, 2022 12:04 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: MOSFETS BLEW UP in my UPS-CyberPower-1500

Update Using Chip-Quick to help removed the two inside Heat-Sinks all 8 Mosfets are the same. :) Mosfets SM6002N Blown_aa.jpg I have only been able to find used SM6002N MOSFETS, which would be a cost of about $40 ($30 would be shipping). :roll: I am not thinking this would be a good thing to do. :c...
by bob195558
Sun Jan 16, 2022 1:31 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: MOSFETS BLEW UP in my UPS-CyberPower-1500

Here is a much better pic of PC backside where the SM6002N mosfets are located. Click on the link to open the pic and you can zoom in for a better view too. SM6002N mosfet backside_3b1.jpg I am having some difficulty finding new SM6002N mosfets. Is there a mosfet that will work in its place ?
by bob195558
Sun Jan 16, 2022 2:03 am
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: MOSFETS BLEW UP in my UPS-CyberPower-1500

Looking over the mainboard, I did not see any other thing that may be heat/burn and traces looked good. Some manufacturing stuff looks to be a little dodgy to me, but that is what that is. There is some explosion debris on the mainboard. You will need to download each of the higher Pixels pictures t...
by bob195558
Sat Jan 15, 2022 11:45 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: Diodes Blew Up CyberPower 1500

Hi Kilrah, Thank you for your reply. When the MOSFETS were blowing, they seemed to be blowing one after the other, very quickly with loud noises, fire and some smoke. Computer and monitor stopped running and I had another UPS, which I swapped in and all started up as if nothing had happened. So that...
by bob195558
Sat Jan 15, 2022 7:50 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

Re: Diodes Blew Up CyberPower 1500

Hi, Anyone have an idea to what could be the cause for the diodes to blow apart ? CyberPower 1500VA AVR Model: CP1500AVRLCDa I have found some replacement SM6002N diodes and was thinking that it may be a good idea to replace the relays too. As I was thinking, if a relay stuck together it may have ca...
by bob195558
Sat Jan 15, 2022 1:45 pm
Forum: Other Electronic Projects
Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
Replies: 9
Views: 6512

MOSFETS BLEW UP in my UPS-CyberPower-1500

Hi Everyone, Last Thursday my CP1500AVRLCDa CyberPower battery backup blew up with flashes of fire and smoke coming from the upper vents. It was impressive to see and my desktop computer and monitor shut off immediately. I opened the unit up and easily could see that several of the SM6002N diodes ha...
by bob195558
Sat Jan 15, 2022 2:34 am
Forum: 3D Printing
Topic: Designing with FreeCAD (3D Printing)
Replies: 4
Views: 2001

Re: Designing with FreeCAD

Some pictures showing the assembly of this Van-Air (now Air-Dryer) filter with the moisture absorbing Silica Gel Blue Beads. Moisture Absorbing Silica Gel Blue Beads_aaa.jpg VanAirFilter_SilicaGelBlueBeads_cc.jpg VanAirFilter_SilicaGelBlueBeads_ff.jpg VanAirFilter_SilicaGelBlueBeads_bb.jpg
by bob195558
Fri Jan 14, 2022 11:09 am
Forum: 3D Printing
Topic: Designing with FreeCAD (3D Printing)
Replies: 4
Views: 2001

Re: Designing with FreeCAD

Here what I have designed with FreeCAD and 3D Printed.

FreeCAD AirDryerTube_b.jpg
FreeCAD AirDryerTube_b.jpg (44.37 KiB) Viewed 1956 times

Simplify3D AirDryerTube_b.jpg
Simplify3D AirDryerTube_b.jpg (51.09 KiB) Viewed 1956 times
by bob195558
Thu Jan 13, 2022 7:37 pm
Forum: 3D Printing
Topic: Designing with FreeCAD (3D Printing)
Replies: 4
Views: 2001

Designing with FreeCAD (3D Printing)

I am changing to Free CAD for designing 3D-Printed parts. It is open-source and has a large community of users who are very helpful when you need help much like Openrcforums is. Fusion 360 is becoming more difficult to use as time moves along. One of the things I like is that it is not cloud-based, ...
by bob195558
Sat Dec 18, 2021 11:46 am
Forum: Other Electronic Projects
Topic: Replacing the LED Lights in a VIZIO TV
Replies: 2
Views: 1676

Re: Replacing the LED Lights in a VIZIO TV

Update and Results:
Received the new LED strips yesterday and reassembled the TV.
This fixed the trouble it had, now working great !

New LED Strips_.jpg
New LED Strips_.jpg (133.35 KiB) Viewed 1484 times
by bob195558
Wed Dec 15, 2021 2:10 pm
Forum: Other Electronic Projects
Topic: Replacing the LED Lights in a VIZIO TV
Replies: 2
Views: 1676

Re: Replacing VIZIO TV LED Lights, (help)

Update:
I was not able to find/determine what the 72 individually LED lights are.
So I ordered 12 new LB50068 LED Backlight Strips, at a cost of about $70.00 from ShopJimmy.com.
LB50068 12 LED Backlight Strips_750.jpg
LB50068 12 LED Backlight Strips_750.jpg (77.47 KiB) Viewed 1547 times
by bob195558
Fri Dec 10, 2021 4:10 pm
Forum: Other Electronic Projects
Topic: Replacing the LED Lights in a VIZIO TV
Replies: 2
Views: 1676

Replacing the LED Lights in a VIZIO TV

Need some help finding what the individual LED replacement light or lights are. I have a VIZIO 50" E50X-E1 TV which I purchased back in 2017. The display screen developed a dark area in the left upper area and after a few hours the whole screen went Black. It still has sound and when shining a stron...
by bob195558
Mon Nov 15, 2021 11:57 am
Forum: 3D Printing
Topic: Looking to buy a 3D printer
Replies: 10
Views: 7658

Re: Looking to buy a 3D printer

Hi Allen,
Yes, CR10 is first and I still using.
I have upgraded it a lot.

You also will find a lot of good info here with upgrades to purchase too.
https://www.th3dstudio.com/shop/

There are more china 3D printers to look at.
What size (printing build area) are you looking for ?

Go to advanced search