openrcforums

Nice to know that there are no problem with capacitors, thanks for this explanation All 16 channels should work, I assume you have something set in the mixer for channels 9 to 16. [/i] Yes I set ruder and P1 on the others channels to check if they will work, unfortunately, only channels 9 and 10 wor...

Thank you Mike! It was my fault! I was using PXX configuration for X series and PPM for D series :oops: After your instruction PXX and D8 telemetry start to work :) I followed your instruction from this link below https://github.com/MikeBland/er9x/blob/master/doc/TelemetryMods.pdf In this moment, th...

Hi all, I bought a XJT and XSR receiver recently to upgrade my old DJT module on my TX ER9X M64 Version: R820. I have some mods like Voice and Telemetry (without inverter and external wires) working well on DJT module with some D receivers. In this moment, I already bond XJT and XSR and they are wor...

Some good new for those using the M64. Pascal (planger), while working on the DIT MULTI module has found a way to reduce the CRC table (for the XJT) from 256 words (512 bytes) to 16 words (32 bytes) while having very little effect in execution time. I've put this into er9x, and tested it with a XJT...

Dear all,

I would like to contribuite with this nice project as I can! Could you inform if I can use this link below?

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?c ... 43JR3J7XGW

Hi Mike!

You are the best! You fixed the problem in one shot!!! Many thanks!!! my precious came back with full activities!!! heheh

Hi Mike,

Follow annex my file generated with avrdude as per your request

Thanks Mike!
I will try this during this night! And post here as you request the the file t.hex on s zip file!

Best regards


Enviado do meu iPhone usando Tapatalk

Hi Mike,
Sorry for my noob question.

Please, could you indicate where can I insert the line commands informed in your last post?

Best regards,


Enviado do meu iPhone usando Tapatalk

I would like to explain that I update the FW of the Radio with r821d as adviced. I could perform some tests from a new model changing only data from AV8 and SC4 with backup and restore commands, but unfortunately, result in my case were the same. I take the model M4Quad FPV and change the informati...

Hi, MikeB, Many thanks, for your support! I would like to explain that I update the FW of the Radio with r821d as adviced. I could perform some tests from a new model changing only data from AV8 and SC4 with backup and restore commands, but unfortunately, result in my case were the same. I take the ...

Dears, Sorry for this inconvenience, but please, some one could tested or detected the same problem? I would like to understand if am doing something wrong or if I have a HW problem! 9xtreme of course will be the final solution, but as everybody now! The old solution is great too! And unfortunately,...

I just put your values for SC4 and VA8 into a model, did the backup then a restore and the values were correct. It is possible it is the firmware in the voice module that is causing the problem as that is where the conversion takes place to/from .eepm. Do you know what firmware you have on your voi...

If possible, please do the following test. 1. Read your EEPROM using eepe. 2. Save a model as a .eepm file from eepe. 3. upload the .eepm file to the SD card. 4. Now try restoring this model in the radio, does it load correctly. Mike. Ok Mike! I will follow your instruction when I arrived at home! ...

Hi Moska, You could also consider upgrading to the 9Xtreme Upgrade Board which uses erSky9x and on your PC you would use eepSkye. You will gain the ability store all of your eeprom model list on the 9Xtreme Upgrade Board. See here for more info: (http://openrcforums.com/forum/viewtopic.php?f=95&...

If possible, please do the following test. 1. Read your EEPROM using eepe. 2. Save a model as a .eepm file from eepe. 3. upload the .eepm file to the SD card. 4. Now try restoring this model in the radio, does it load correctly. Mike. Ok Mike! I will follow your instruction when I arrived at home! ...

I just tested a "backup" and a "restore", with entries in SC4 and VA8 for a model. They appeared to be handled correctly and were in the restored model. I am running a test version of er9x (for r821) from 7-Apr-2016, rather than r820 itself. If you just want to copy a model, you...

I confirm "1)" is a bug, I'll fix that! For "2)" and "3)", are you reading the EEPROM with eepe, copying the model to another slot, then writing the EEPROM back to the radio? Mike. Hi Mike, Thanks for your fast answer! All the process of case 2 and 3 I did directly on ...

Dears, I have a M64 processor running last version of er9x (R820 Frsky NT) and I would like to double check with you, if possible, of course! In my tx, I detected 3 issues, listed below: 1) volume control in my tx is not working correctly when I am using Global Vars. When I am using GV7 set in volum...

Many thanks Mike! Good to see this new development! I will wait for news about this!

Best regards


Enviado do meu iPhone usando o Tapatalk

Hello all,

I am thinking to upgrade my tx changing the processor from 64 to another. In this way, I would like to know which will be correct model 2560 or 2561?
Unfortunately, I have only one tx, thus I have a lot of worries to update without burn all.


Enviado do meu iPhone usando o Tapatalk

Hi Mike and all, I didn't do the serial comunicariam internally to reduce the wires btw main processor and megasound board! How I have TX with m64 I wold like to know which is the advantage today if I will do this upgrade? Can I install/add new switches? Any way, I would like to say that er9X is ama...

Hi Mike!

Nice! Many thanks for your fast answer!


Enviado do meu iPhone usando o Tapatalk

Dears, I tried to find here some thing near to this issue without success... I have M64 processor and I am using r816 fw now! I would like to reporting a strange issue that I found in my tx! When you start a new model and go to "voice" the last position in my case VA9 have a different valu...

Congratulation for your hardworking making this Tx better and better!!! In my mind this on is the best Tx that I know!!!

Many thanks!


Enviado do meu iPhone usando o Tapatalk

Just been looking at the generated code (again). The FrSky version for the M64 is now 416 bytes smaller than r813! I now have 1010 bytes of flash free, so I might be able to add some more extras! Mike. Mike you are the best!!! Thanks for all your dedication to transform this Tx in one of the best s...

Many thanks, Mike! You are fast!!!

Best regards,
Gustavo

Dears I never did this before and I tried this today without success. I am trying to use GV4 to control the sound volume/loudness of my TX! I am using this last version 813 on M64 with MegaSound. Could some one double check if I am doing some thing wrong? I am only set GV4 on the page "setup 1/...

I would like to know if it is possible in a near future or if there are some news on the Fw er9x on the processor64 to support models configuration on the SD card from the MegaSound board. I love this Fw!!! Many thanks for all efforts of all the guys that work hard here!

BR

Heheh, valeu Joao!

Maravilha mesmo é o que vocês fazem aqui! Vocês conhecem muito, além de serem muito cordiais!

Wonderful is what you are doing here! Thanks to all! You are great person and are doing our lifes more simple and enjoyable!

Moska