openrcforums

What error do you get?

Skickat från min SM-G900F via Tapatalk

hmmm, do you use github or Google?
the source @ Google was updated 11 hours ago and on github a month ago, and companion9x can´t be found @ github

HC1969 wrote:Someone has been tested on OpenTX?
Does it work?
Ask me.

Yes it works with OpenTX

Sent from my GT-I9505 using Tapatalk

Have a look here
http://www.555-timer-circuits.com/flashing-led.html

Skickat från min GT-I9505 med Tapatalk

bertrand35 wrote:I just fixed it, it will be in next release.
https://code.google.com/p/companion9x/s ... ail?r=1795

Great, thanks

I have setup this in my TX http://richard.claesen.se/hobby/9x/20130407_152451.jpg but when i read it from the tx to c9x it shows up like this http://richard.claesen.se/hobby/9x/c9x.jpg but when try to burn it to the tx the right values are there..hmmm and you can not select a value lower than 256, s...

there are files in the new voice pack that is not working, the files i have found that is not working is 0264,0366,0373,0377,0378,0395

Tapatalk works

Skickat från min GT-I9300 via Tapatalk 2

there are bluetooth modules for computers too

What have you done to the orange thing above the green wire?

Skickat från min GT-I9300 via Tapatalk 2

U need to have r60 to have bluetooth support on the tez

Skickat från min GT-I9300 via Tapatalk 2

gohsthb wrote:huginen,
do you have a the stock processor on your board? I opened an issue on the Open9x site, but I only have a '128. If you have the '64 it will help them determine where to look.
-Gohst

issue link:
http://code.google.com/p/open9x/issues/detail?id=198

yes i have the stock processor

er9x-r782 --- no problem --- file flashed:er9x-frsky.hex open9x-r1855 --- no problem --- file flashed:open9x-stock-telemetrez-templates-sp22-pgbar-en-r1855.hex open9x-r1947 --- switch error on THR and AIL and indicates as activated all time --- file flashed: open9x-stock-telemetrez-templates-sp22-pg...

i just flashed er9x-r782 and everything works so it has to be something with open9x r1947 i also tried to flash r1855 of open9x and nothing wrong there

I have only telemetrez checked and when flashing i get the switch warning and it will never go away

Skickat från min GT-I9300 via Tapatalk 2

i have the same problem as mpjf01 has with the latest version of open9x....

i just tried in v1.15 again and it worked

Romolo just fixed a bug in the compile script

now it works , no switch warning or anything like that

Ok, i Will try

Skickat från min GT-P5100 via Tapatalk 2

I have tried it many times before I went back to v1.13 where I can choose both frsky and telemetrez at the same time With both frsky and telemetrez selected no problem at all not even a switch warning comes up, but when I only choose telemetrez or frsky I got switch warning as soon as I turn on the ...

Promix in version 1.13 of companion you can choose both of them at the same time but not in 1.15

Skickat från min GT-I9300 via Tapatalk 2

i waited almost a minute or more more.....

when i downloaded open9x with both frsky and telemetrez selected in v1.13 i have no problem, but when i download open9x with v1.15 where i can only choose one of them i got this problem, so i think we need to have both that option selected to get it to work

i have the same problem as Promix has, in companion9x v1.13 you can choose both frsky and telemetrez but in the latest version of companion9x you can only choose one of them , and the problem is there but if you download open9x with v1.13 of companion9x and flash everything is good so i think you ne...

i did that, and got the switch warning, and the warning did not go away until a pressed a button

after that the switches shows as activated on the display

i updated to v1.15 and tried to download open9x with frsky and telemetrez option but i can only choose one of them, and when i flash the firmware to the radio i got switch warning on THR and AIL but if i go back to v1.13 of companion9x i can choose both frsky and telemetrez and when i flash that fir...

Merry Christmas to all of you