openrcforums

I am looking for a template for crow mixing,for gliders.
Does anybody have one please.
regards Jeff

I have set up my 9xrpro transmitter for use with my electric flying wing 12ft span using the template 05 elevon/delta as per the 9xrpro manual and the model is flying ok,but I need to introduce some differential to the ailerons,i need 40%less down,cant seem to find a way to do this,can anybody help ...

tx working ok and have flown today
I have another question,i wish to use my 9xrpro as master and a 9xr as pupil where can I get a connecting lead for linking the 2 txs

I could make one if I had details
Jeff

+Many thanks MikeB all now working and can now bind all my DSM2 rxs.
Advise please my 9xr pro has the version R202 and VER V.3309.mike do I need to upgrade the firmware?i am very hessant to do this as not sure how to do this,i would need a step by step instructions to do this.
Jeff

I have a 9XRPro and have used it for some time using Corona tx module and CR8 receivers and no troubles,so I decided to change to DSM2protcol and purchased a Orangerx DSMX/DSM2 TELEMENTRY MODULE for the 9xrpro and this module uses the internal aerial system,also I purchased the standard orangerx dsm...

I wish to download eepsky for my 9xrpro, how do I do this and my computer is a windows 8.1
many thanks
Jeff

can it be possible to have these drawings in PDF FORMATto enable us to print them?

regardsJeff

is it possibly a good idear to have the 9XRPRO wiring drawings put into PDF format so as to print them at a good size to use them

regards Jeff

I have 2x 9x transmitters with receivers as new in orignal boxes for sale price £25 ea plus postage these have never been used,and one tx has the interface wired in professionally. I also have 2 hobbyking tr6a receivers as new,these bind with 9x transmitters without any problems both for £10 plus po...

i have 2 T9X transmitters with rx for sale.
If you are interested give me a price you would pay ,postage extra
Jeff

Many thanks for your help
working ok and used the safety switch
Jeff

I have just received my 9xr pro transmitter and am setting it up for a electric glider. I have the rudder,elevator,ailrons and throttle all set up ok,but i want to set up flaps on channel 5 and link to a pot on left hand side of tx (P1). How do i do this? i am new to computer transmitters of this ca...

i would like to thank jhsi,mikeB,and KAL for all the help,many thanks
Jeff

do you mean the trims for the rudder,and ailron,and what is ment by hold
as the trims can stay on 0 without holding
Jeff

Hi Kal Now have eepskye installed on desktop as shortcut and it opens ok problem seems to be i had a rar extract programme installed and the eepe files were trying to open in rar,so i delated the rar program and all worked and downloaded ok. Now i have eepskye installed,where do i go now? regards Jeff

Do i need tx connected to computer? Ihave done as above,cannot find view raw file on right hand side. i can only get eepe in download file and does not have eepskye in the folder. i can get eepelnstall but does not have eepskye only eepe in it. i am not sure what i am doing,as complete novise at thi...

i have done as Klaus said above and downloaded and get a folder label eepe
which is in folder( download) and when i click on eepe there is no eepskye folder.
sometimes there is a window comes up there is a update to eepe and when i click
update it says unable to update.
regards Jeff

How do i download the eepskye program please as i have just got my 9xr pro
regards Jeff

with ref to OrangeRX TXplug in module there was a post on a replacement cover for this module to enable the aerial to sit in a better position at back of tx. the person was making these module backs using plastic 3d printing. can anybody give me the link for this,as i belive it was posted on OpenRCf...

9xr.jpg i have just received my 9xr transmitter from HK and unpacking it to check it i found something rattling about inside when moving tx. so i opened the back and the item in photo fell out,so i replaced back fitted battery pack to check every thing out. all trims work ok as do the program butto...

Many thanks to you all for your advise,i have decided to do the mods to the 9xr
so as to have read-out on the 9xr screen.
Have ordered all parts from HK so look foward to receiving them
regards Jeff

i have just got a Turnigy 9XR and wish to use FrSky DFcombo pack of module and receiver.
Do think that this would be a good combo?
regards Jeff

link to ebay seller put in this number 130839812397 IN EBAY search box.
i have just logged to this seller and it seems he has sold out of stock
Jeff

Dvogonen having read your last reply i
measured the micro switches and found out they are same as yours 5x5x1.5 these
were advertised as 4x4 andthe packet they came in also stated 4x4
regards Jeff

i have now obtained some tactile micro switches 4x4x1.5,as used by Dvogonen in his mod to the Turnigy 9XR programming buttons
these are the exact same ones,and as i have a 100 of these i will keep 20 and sell of the rest.
cost £1 for 10 inc postage.paypal preferred
regards Jeff

Many thanks for putting me in right direction Dvogonen
have ordered buttons
best regards Jeff

I have placed an order for Turnigy 9xr transmitters 2 off and have read a lot about the programming buttons not working correctly and intermittent. somebody has posted on some forum about a modification to solder in some min button but cant find anything. i am wondering if anybody on this forum know...

i am interested in doing this mod,can you do full details so as i can do the same
best regards Jeff

Many thanks to all,for your help and i have decided to go with EEPE and ER9X
Regards to you all Jeff

i am now so confused i dont know what to use for my Turnigy transmitter program wise or software to load
Please i need some advise please
Jeff