Search found 5 matches
- Fri Jun 19, 2020 3:10 pm
- Forum: 9Xtreme upgrade board
- Topic: Tx Disk Not Mounted
- Replies: 10
- Views: 12474
Re: Tx Disk Not Mounted
i have the same problem with Turnigy 9x with new board and SP Basic 9x Programmer..please help
- Fri Jun 19, 2020 2:58 pm
- Forum: er9x model setup
- Topic: avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
- Replies: 1
- Views: 10627
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
Hi, I just get replacement board for Turnigy 9X from Banggood after frying the original one. I bought also SP Basic 9X Programmer. When i switched on my new board, i got blank display with backlight ON. In eepe, i got TX disk not mounted and avrdude.exe: error: could not find USB device "USBasp...
- Fri Jun 19, 2020 2:53 pm
- Forum: er9x
- Topic: Where to find er9x
- Replies: 48
- Views: 90349
Re: Where to find er9x
hi, Please execuse me for hijacking this thread. I have this error when using eepe try to read from 9x. "avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc" Long story short, i am replacing my board after frying it while soldering it with the one fro...
- Fri Jun 19, 2020 2:44 pm
- Forum: er9x
- Topic: Er9x installation tutorial.
- Replies: 9
- Views: 6036
Re: Er9x installation tutorial.
i have new board ED40502-H16D for Turnigy9x which i managed to fry while soldering. I installed also SP Basic 9x Programmer. When open eeye, i got TX not mounted. WinUSBasp is detect and driver is installed via Zadiq. When i switch ON, i got blank display and backlight ON. No beep what so ever. Plea...
- Wed Jun 17, 2020 2:49 pm
- Forum: Hardware
- Topic: FS TH9x won't turn on
- Replies: 23
- Views: 16363
Re: FS TH9x won't turn on
Hi,
i have the blank screen after replacing the motherboard. I fried mine when soldering it to,the solder pad fall off. So new motherboard came and i just replaced it. When i switch it on, the screen was blank with back light ON.
Any tips to solve?
i have the blank screen after replacing the motherboard. I fried mine when soldering it to,the solder pad fall off. So new motherboard came and i just replaced it. When i switch it on, the screen was blank with back light ON.
Any tips to solve?