openrcforums

Hi I have been using Frsky S6R receiver with my X9D Taranis (OpenTX) for quite some time, and have been very happy with the results. I have just purchased a Horus X10S and would like to try the FRos operating system. The transmitter set up the S6R. but I do not know how to set up channels 9 / 10 /12...

Mike

I have set a single mix on channel 10 on SA using the channel monitor screen I can see the switch output change from -100 0 +100 but the receiver still wants to use the gyro no matter what position SA switch setting is.

Mike I have quick mode enabled Channel 9 set the gain (working OK) Channel 12 works OK not sure I have channel 10 set up correctly MIX set as follows CH10 SE Weight (0%) Switch (SE-) Gyro stab += SE Weight (-100) Switch (SE Up) Gyro S/ Level += SE Weight (+100) Switch (SE Down) Gyro off Could you te...

Mike I have the receiver set up on the bench and have it bound to my Taranis X9D plus TX Each servo moves as it should. I have S1 set to adjust the gain SA to adjust gyro mode SH to set urgent mode (when I toggle SH3 times the blue LED lights up on the rec) As said when I alter SA switch the receive...

Good Morning Once again thanks for your help (ran as admin and now working OK). The receiver seems to be working, The only issue is that using the set procedure and setting channel 10 to switch between modes I can not get the receiver to stop being in the stabilisation mode I have set SA switch as a...

Hi I have just purchased a SR6 Receiver along with a STK Dongle. I have searched the Frsky web site for a copy of the Config Software for the S6R but an not find it, could someone please point me in the correct direction. Google the S6R and it sends you the an older addition of the FRsky web site an...