openrcforums

the protocol is in the list

thanks
Régis

yes 5 if you don't touch it, it is zéro, when you change the value in the mixer channel expo you can't go back to zero. the value is x+128.

thanks Mike run good, i'm going to program few models and test it, sounds great ! it's perfect to use multi module. I notice when you select exp in the mixer (i don't use it anymore !) that the value shown is the value +128.

ok,
For the EXP i will do it like that, i'm a beginner on ersky it's really intuitive.

thanks

hi Mike,
i program a simple airplane and i can't use flight mode in the mixer, i can't put any value in mixer exp, copy a model is not working. are they next improvements ?

Thanks
Régis

hi Mike,

I install it everything is fine, i'm going to try to program my xvert and my blade 200 now.

Thanks
Régis

Thanks Mike,

frsky ok, i didn't try telemetry,
dsmx ok
dsm2 doesn't work (i'm going to test with another radio and another module probably next week).

Regis

Hi, i need your help with an URUAV TMX5 LITE (the c8 version unfortunately), i install it on my Tandem X20, so i make some change in the _Config.h file to get only FRKSY and DSM protocol in the module. With FRSKY no problem, but with DSM nothing at all. I use for the test a ar636h spectrum reveiver ...

It is Just PERFECT thanks Mike for this work and the time you 've spent on it, it's wonderful, Tandem S will propably works too now.

waoh ! no i get true 8 but when i try to switch between ethos and esky it failed on ersky (black screen) i switch between black screen and ethos now

Sorry it doesn't work. i put on the root and rename it as firmware, and i only got a black screen. when i push the enter button i get back to dbootloader.

i've change my CR1220 battery today but no change. Thanks for the time spent!

yes led 1 to 4 (not 6) one after another in loops, an i can go to bootloader by pressing enter and power button.

it hang with 3 left lights on.

i confirm, i rename it as firmware.bin and copy to the root directory, unplug from my pc the memory is flashed. When i came out of the bootloader the radio is bricked with the power button on.

Sorry for rom iwas speaking about RAM

i did another try with the rom : black screen with blue power button, i remove the battery to stop the radio.
i install again the h file same result

i send a private message for videos, i 'll try again your Rom version.

i install again ver 4 and now i have only a loop on 4 led (3 right and 1 down left) weird the result change.

at first start in the first loop i've got one to four and after one to three.
the rom shows a black screen i have to unplug the battery to go back to bootloader.it seems there is no loop anymore

same as before only one and two on the left

This time only one and two (top left and middle left)

hi,

all light up ! one after another as you describe in a loop. send you a video

yes send me a special version to try no problemo

i have no directory called "RADIO" in the Root in fact when the firmware is installed the radio stay in bootloader when i press the start button it try to start i can see a flashing loop in the start button (it's really hard to see) but nothing appened if i want to stop the radio i have to...

hi,
i install it as your explain, but i only have a black screen with a blue start button if i press enter (right rotary center button) i just go back from bootloader to black screen.
tandem x20
ethos 1.017 EU

Hi Mike,
i'm going to install it on my X20, is the dual boot flash is a no return modification or it will be erased by installing firmware ethos bin file directly ?

Thanks
Régis

we use oxs on 3 Jeti radio with beitian bn180 and b220 and they just work perfectly, the accuracy is 5 meters. enough to find your glider in a hole.

Hi carbo, Just for information after using few 100a and 50a acs 758 without ads1115 we found out that the slope is linear (good), but the zero is not 2.5v it can change from a sensor to another and the resolution is less than what we can read in the datasheet (bad) it also varies from a sensor to an...

futaba....
thanks