openrcforums

Why not just add an usbasp programmer and an mini-usb to the Transmitter - they are really cheap and small:

Yes, with openTX i know - use and prefer that on my 9x, but the OLed does not work with openTX (yet)

Thanks! nice to hear that, especially from you!

btw. is there a way to use more than 16 Models with the m128?

Thank you Mike for including the patches to the standard release. I found out minor integration error and I'm attaching a patch tarball correcting the problem. You may apply this in the next release. Current implementation supports 4 possible LCD combinations: (stock-ST7565-LCD,SSD1306-OLED)control...

Hey, that is exactly what i am trying to do! Perfect.

I opened your Template in companion9x for openTX but it does not seems to work.
Whixch stick shall control the output on ch01?
Maybe there is something goiing wrong when importing the template...

mine are still on the way...

Yes, i use them in my FX-18 already to extend from 12 to 24 models ;_)

*dream-on* an then a model-converter from futaba to open9x in companion....*dream-off*

Yeah, that seems to be easy, so i will wait fro your experiences..

just wait for the m128 version and maybe set the fuses before the first flash?

Yes, i allready did this, disabled most of the telemetry screens i do not use, simplified some mixers and removed unused switches, will check the other stuff you requested! ...my Hangar is just to big and every model i use more often i want to port from the FX-18 to the 9x, so i do not have to carry...

Hey, m128 support sounds great, i think i will try that once it is is in copmanion, seems like the easiest solution for me ;_)

Storing models to the computer is my current solution, but then i have to upload the models before i go to the field, this is not the perfect option. m128 Upgrade means "just" replaing the m64 processor with an m128? Does open9x work for this or do i need to compile it on my own? By the Wa...

Thanks for your answers.
Is there any other option on how to get more models on the open9x by removing some firmware options (but this is flash only, not eeprom...) or something else.

Yes, right, i forgott that, Miso and Mosi are used for telemetry.

So i will wait for the FrSky X12D i guess...

Hi, it it possibel to use the SD-Card mod on the stock-board as it is described on the radioclone documentation with open9x?

http://sourceforge.net/apps/mediawiki/r ... e:build_SD

My eeprom is allready full with some models and kopters with a bit complex programming.

Thanks, that was fast! works fine again!

Since some days i am unable to build companion9x under Kubuntu Linux 12.04. It worked some weeks ago, but with the latest SVN checkout it always fails with the following errors: Linking CXX executable companion9x CMakeFiles/companion9x.dir/open9xarmimport.cpp.o: In function `Open9xARM::evalFunctions...

ACS768-100B should be the same, but with 20mV/A and an offset of VCC/2

Thanks, i thought it works that way, but.... My ACS758-100U has 40mV per A and 0,6 offset, so i set the max to (3.3-0.6)/0.04 = 67,5A (thats enought for me, will never have more than 50A) Then i set the offset to -15 so that it showed 0 at 0 amps. Not i started pulling current and compared the amp d...

Why do you use er9x, i swithced from er9x to open9x and like it more, don't miss anything from er9x

Just an example to better understand what offset can be used for. Suppose you have a bidirectional current sensor, +/-50A This kind of sensor has an output of 1.666V when no current flows, 3.3V at 50A and 0V at -50A Then you will have range 100 and offset -50 I am just playing around with the curre...

Tested the FAS-100 with open9x last weekend, reading voltage and Current works fine, Power and Consumtion (mAh) are calculated by open9x.
Thanks Guys, works perfectly fine!

I will try that as soon as i get mine!

Yes, that for sure, will test it the next days if i get time.

Damn, open9x sounds good, especially the FrSky Vario, but i got some models running on the er9x now...

Yes, that sounds good! If i see it right alle hub data values are written to the FrskyHubData structure. Would it make sense to use/display the Amp-Sensor Voltage 0x3A Voltage(amp sensor) 0.5v 0-48V Before “.” 0x3B Voltage(amp sensor) After “.” instead of the A1 or A2 values if the Amp-Sensor Voltag...

The new FrSky Current sensor is now available from Hobbyking

http://www.hobbyking.com/hobbyking/stor ... ensor.html

I was wodering if this one is already supported by the er9x firmware?

Unfortunately i will not have time to check this this week, going for skiing tomorrow morning. But a said before, the default value of frskyinternalalarm is 1, meaning the FrSky Module Alarm is disabled by default. The default mode of the er9x sound-system is beeper, which requires the FrSky Module ...

i think this is the problem, if speaker mode is disabled i am not able to enable the frsky alarm and the default seems to be that it is disabled instead of enabled.... YES, if i switch to speaker mode i can disable the internal alarm which enables the module internal alarm, back to beeper mode the a...

can't find it...is this only in the speaker version?