openrcforums

Hey, I have some bugs with my X10S internal ISRM-S.Modul 1.1.0/2.1.6EU I will update it. So I think I have to update my OpenTX first, from current 2.3.11 to 2.3.15. First I installed the new Companion 2.3.15 and I conneted my X10S, I´ve done the Backup of my 2.3.11 Firmeware too next I tried to writ...

Dear mstrens, Thank you for your great support and many thanks for your persistence with my inability! This test was successful, I was able to read out the sensor and also recalibrate it. So the ACC is in Life! Now I also changed also some settins in the script, I changed the INT to Pin3 = #define P...

Ok, now I soldered PIN2 to INT on GY86. And I changed in the: oXs_config_description.h PIN2 and YES as following. #define A_MPU6050_IS_CONNECTED YES : Replace NO by YES if a IMU6050 is connected and has to transmit his data #define PIN_INT_6050 2 // Interrupt from 6050 has to be connected to Arduino...

Are you using a pro Mini?..Are you sure that is 5V 16MHZ, and not the 3.3V 8Mhz? it´s a clone by ebay and on bottom there is noc dot for 3,3 or 5V But on the chip is 328P 1437 and I "guess" it should be a 5V, because with 5V I receive also the Baro and the GPS signals too. (in case for 3....

Hello Eaglefly, Do you have correct accelerations outputs in X,Y AND Z, because I'm having good output in Z but not in X and Y... Do you use opentx? Best Regards Enviado do meu Mi 9T Pro através do Tapatalk Yes I have X,Y,Z signals but not good and only very few signals. after power on, it needs fe...

Now I downloaded the folder openXsensor and used it for a fresh new version and I could realize it as described by you. Now there was no more message. ...as soon as you get it right, it already works!! (the ACCY,Z,X are waked up and send datas, however only about once a minute, also the GPS didn´t f...

I´m sorry, I think that I´m not able to find the right way! (...maybe I´m not born for arduino and I´m short before giving up.....) Now, I copyed the following two files https://github.com/openXsensor/openXsensor/tree/master/openXsensor/examples/frsky/vario_4S_Current_GPS and replaced it in my scrip...

Ok, I tried again and I used the Version from original download 4days ago and just changed the extra setup for GY86 + GPS and the ACC modify as you send me above. But anyhow I got the same message too! Please find the attached File, maybe I have another mistake inside but I don´t know!? basic: #ifnd...

Thank you mstrens for this help!
I´ve done it as you post, but now I got the following message (I´m sorry but I don´t know what that means, I´m a beginner with Arduino) but what should I change now?

Hey Guys, yesterday I received my GY86 Sensor and I connenctet together with my GPS on my pro_mini. GPS, and Baro works fine and I changed all parameters with the hope that I did it right. My Horus telemetriy get following Sensors :Vsped, Alt, RSSI, RxBt, RPM, GPS, GAlt, Gsped, Hdg but no ACC data. ...

thank you for the LUA Script YAAPU, thats great and there is a very good Explanation and tutorial on YT too. With this description I installed it and it works fine within the Horus X10! Now I´d like to find a way for the LUA Horizon -> https://www.youtube.com/watch?v=brEGcwDVmN8 But there I find jus...

Hey Guys, for all the beginners (like me) it´s not clear how to install the LUA script? The Sensor datas are commining, I see it in my openTX in telemetry. But wich LUA Script I can use and how to install on the Taranis/Horus? I´d like to use this SCRIPT: https://youtu.be/gwwgY8Oa6vE or the "Ho...

sorry, I found my mistake.... I have to save this folder within arduino examples and after restart arduino I found this folder right now!!!!!!

Thank you KH for this help.
My problem is, I can´t or I do it wrong to open just the right Arduino file!
Just be be sure, how to open the files, just open as double click comes the following message:

Hey Guys, I´m sorry, but I am not experienced with arduino and I don´t understand how to get the openXVario starting point in arduino. I know how to copile and how to load the example BLINK on my pro mini, this is clear for me! And I understand that I have to use Configurator tool for create my indi...

Hey Guys, I´m new here, "HELLO" ! ;-) I´m also new with my Horus x10S E (with just ACCESS) and I have some questions... 1. Is it true, I can´t use my L9R anymore with the internal new ISRM ACCESS or only D16!? 2. I´d like to do an shortcut or take an switch for start my BF LUA script, beca...