openrcforums

OMG Mike!
I was just about to shut down my computer and call it a day when I saw your last post..

It FLASHED!
Thank you so much!

I've downloaded AvrDudess , but am uncertain of some of the settings that are needed. This is what I have so far. The chip in the ORx module is an ATXMega32D4. What do I need for the Bit clock, if any? And setting for the Fuses and lock bits? In an old post, it mentioned, "Lock bits should be 0...

So, shorting the two 100 Ohm resistors R1 ,R13 did not help. It might just be this particular module. The previous owner mentioned that he could not get the OrangeRx usb programming tool to connect to this module to reload the OEM firmware. I'm just (very) glad to have the ability to flash this with...

Well, ArduinoISP didn't work, with "Upload" or "Upload Using Programmer". I also downloaded a fresh copy of DIY-Multiprotocol-TX-Module-master.zip (v1.3.1.9) and tried again, but no go. Regardless of the Programmer selected, the verbose output shows the same beginning message. Us...

I need some help using an FTDI (cp2102) device to flash the OrangeRx module. I managed to load the bootloader on the ORx module using a Pro mini + the ftdi device. Once that was done, flashing custom compiled multi firmware is pretty straight forward with my T12 loaded with ErSkyTx/bootloader v3.0 a...

There is a missing component below the audio amp that may be the problem.
The Tx has been updated to 2.3.4 as well as the bootloader.

Could someone please help me ID the missing part? I will kiss you in the mouth if I can fix this. Thanks.