openrcforums

With its own config_basic and config_advanced in SDP3X, VSpd now works perfectly
thanks mstens

Hi msterens,
is there still a chance that this mistake will be corrected?
Otherwise I have to stick to the hardware solution without lua script.
thanks

Thanks

Hello mstrens,

is this a bug or are there settings missing that I have overlooked?
thanks
best regards
Robert

When searching for the VSpd sensor, it does not matter whether the PPM transmission via PIN_PPM or PPM_VIA_SPORT is active. This is only important if I want to change the sensitivity. If you switch from PIN_PPM to PPM_VIA_SPORT in the sketch, VSpd is no longer found. // #define PIN_PPM 3 #define PPM...

You have a file in the openx sensor master called oxsppm.lua in the subfolder functions from the Lua Scripts. You may want to edit the channel, that by default is channel 9, i believe. Afterwards you have to assign a button a you want from your radio for executing the script, and then you will have...

Sorry, I forgot the examples

Hello, There are two ways to change the sensitivity of the vario (MS5611). Either with #define PPM_VIA_SPORT or #define PIN_PPM This also works and VSpeed is found as a sensor in both cases If you now also use AIRSPEED_COMPENSATED, then in PPM_VIA_SPORT mode no more VSpeed found, when using PIN_PPM ...

Thanks mstrens,
for fixing the bug quickly. It now works as desired. I hope that many users will use this program.

greetings
Robert

Thanks mstrens,

it is only the new python in the folder

greetings
Robert

Hello mstrens,

well I found another mistake
best regards
Robert

mstrens wrote: ↑Sun Feb 02, 2020 12:27 pm Thanks for reporting those bugs.
I put on github a new version of the configurator that, I hope, fix the 2 issues.
Let me know if it still does not work.

Thanks for the quick solution, now works as it should
Robert

Hello, I'm testing the configurator. Two problems have come to my attention. The first problem is, if I call the saved Curr_Volt_Tmp_Vario_SPort.ini again, the field VCC is not selected, although I saved this parameter. See picture: openXsensor configurator V1.0.2.png The second problem is: When I t...

Perfect, now the locator works
Thanks mstrens

Thanks for the answer,
the I2C address of the OLCD is the same for both versions
#define I2C_ADDRESS 0x3C
That's not the problem.
Here again the pictures
Robert

Hello mstrens, i have rebuilt the locator. unfortunately i get no display on (OLED 128X64 I2C SSD1306) My components 2x Ardu 328p 3V3 8Mhz; 2x SX1276/RFM95; 1x GPS 1x OLED 128X64 I2C SSD1306; and 2x external power supply 3V3, 150mA; The display was tested by me with another scetch and works. In &quo...