openrcforums

Sorry, I only invested in the ERSKY board just to fit the Aurora gimbals, so they aren't for sale.
I bought a whole Aurora, that had the touch display broken and Tx module amputated for ~40€ as only sticks are impossible to find.

It's sorted now, thanks!

Sweet, I'm not intrested in Audio.. I have a ezUHF Tx thats powered from the internal battery, thats why I'm pretty locked to 3s Lipo. And the reason for the need of SKY motherboard is the option to use Aurora gimbals, so it's actually only because of the gimbals I'm going to upgrade. I did send you...

Is it possible to run off a 3S1P LiPo without the 5V switching regulator? Just using the 5V Linear Pre - Regulator?
I know it's a heat issue, but have anyone tested sucessfully? (rev-C/3.0)

Oh.. ur waiting for the frSKY x9D perhaps? ;) You're not able to use the stock 9x board for a month or two? :D I have them gimbals from Aurora 9 waiting to be installed, I'm a bit "afraid" of the 5x less resolution will affect my Naza quad in a bad way if I don't have this board or "O...

As topic, with or without LCD/LED screen.

I pay with paypal, you ship to Sweden

PM me.

Thanks for your reply!
I won't be using any servos at all, only a NAZA FC for my multirotor which will control 4 ESC's, don't know if this matter? Don't hurt to ask
I will probably try with less resolution and keep my eyes open for a used erSKY board meanwhile.

Hello, I have the TGY 9x with smartieparts board and the er9X FW, think it was build R777? So, I I'm tired of the original gimbals and have read a little amount about the Aurora 9 mod, but I didn't read too good before I bought a used/crashed Aurora 9 Tx to recover the Gimbals from. Now that I'm rea...

Where do you guys find theese gimbals?
The 2 shops I've found have listed them as out of stock and in some threads people are saying that theese wont be availble anymore =/

Great! Thanks for your support!

hanks for your reply. I'm running in traditional-mode, 5 servo leads between reciver and Naza FC. To be sure I'm doing what your are asking me to do I'm writing the steps here: - Menu 6/10 -Limits, I have set values to -85 and 85 on channel 1-4. - I calibrate the sticks in er9X/TX and save. - Cycle ...

I just tried to set E.limits to off and adjust the endpoints to 125, and recalibrate in both the Tx and Naza. Still the elev, ail and rud only slides 95% to the left in the Naza assistant. Tried sending DJI an email, but didn't have any clue.. Only they sais that they haven't tried my setup and it c...

Hello, I have a TGY 9x with er9X FW R777 with ezUHF tx and the DJI Naza FC. I have calibrated the sticks in er9X (several times) I have setup the mixes to switch in diffrent flight-modes and so. all my travels are set to 100%. I do have a problem when I do the TX calibration in the Naza assistent. E...

Thanks, okay, I was just thinking of how the Naza knows what switch is in which position.
Now that you introduced me to the Percentages thing cleared.

20% HALF ID0
40% HALF ID01
60% HALF ID03
80% HALF GEA
100% HALF Some other function

That replace parts, I'm not sure what you mean?

Reflashed with er9x :) Thats why I'm posting in this section :) Yes, I've read that thread, but I'm not too sure If I'm doing it right? For example I couldn't find the "MAX" in the mixmenu. But, in the mix menu I have done it like this: CH5 - 100% - Full - ID02 + - 100% - HALF - ID01 In my...

Hello, I try to figure out how things work with this radio, I will use it for a Quad-copter. I want to assign the 3 position switch to channel 5. To toggle between Manual, Atti and Atti+GPS mode in my DJI Naza flight controller. But, I can't figure out how to do it, I haven't found any channel assig...

Thanks rob, found the thread.
But I'm looking for something similar to this, so that I cvan rest my arms and use my finger tip's only.

Alright, yeah I noticed that JR PCM 9x, is even more idetical to the 9x than the MX-12.

Any one of you use a tray for your 9x? I'd be glad if I found one that my 9x would fit properly in.

Thanks guys.

Hello, I'm looking for a radio tray, you know those big tables attached to a neck strap for my TGY 9x. But thoose seem to be hard to find? While my friend have an old Graupner MX-12 35Mhz, I noticed that the back of that radio is almost identical to the 9X radio back, as I didn't have my 9X with me ...

Okay, I would want the FrSky not to transmitt!
I will use FPV that broadcast on 2,4Ghz, reason why I'm not going to use FrSky while FPVing to minimize the risk of interference.
Will I need er9X to set the PPM/PPMSIM?

Hello, I have a FrSky DIY telemetry module soldered to the board, but now I also want to use the ezUHF, UHF transmitter. If I plug the ezUHF to the trainer-port at the back of the radio, will this disable my FrSky module? or do I need a switch to interupt the + and - of the FrSky module? Do I also n...