openrcforums

I am beginning to understand more clearly, thanks to you and others with continuous support. Thank you for your time!

Hello, I had a question regarding the d/r or t/r & expo on switch D. Would I use this as my emulation of the beginner/ intermediate/ experienced switch from original radio instead of the safe switch programmed on (channel 5 SA)? If so what is Switch A used for .... Outside of this I have succes...

Here are the promised pictures of the Inputs screen showing D/R and Expo (actually T/R). https://uploads.tapatalk-cdn.com/20191019/ffacd4a05d3061e2b7f9cea02059855c.jpg https://uploads.tapatalk-cdn.com/20191019/547c8adb824c23fab75b4d91359446f3.jpg Hello, I had a question regarding the d/r or t/r &am...

Oops. Here are the pictures. https://uploads.tapatalk-cdn.com/20191018/c1bd2fde48f96b00e44d290d9069662d.jpg https://uploads.tapatalk-cdn.com/20191018/c7c9d0e8d8088273f3b316352e5a61f0.jpg https://uploads.tapatalk-cdn.com/20191018/155e8e95a1e8fa6194e2f8c6b9083c7a.jpg https://uploads.tapatalk-cdn.com/...

Thank you for the feedback. So hopefully you can tell me if my setup is correct and if not would you mind providing me with a setup checklist to successfully setup my radio to the horizon sport cub s with the panic switch and three position switch (begginer, intermediate, advanced mode) ? So firstly...

Ps... pictures of your setup would be huge !

The rates and expo for three control surfaces (R, E, A) are controlled by the Rate switch on the transmitter (assuming you are using a DX4e, DX5e or DXe). The rates are 100% with the switch up (position 0) and approximately 70% with the switch down (position 1). On the MLPDSM, rates are controlled ...

Here it is in a nut shell. Channels 1-4 default mixes Channel 5, 3-way switch -100, 0, 100 Channel 6 TRN switch -100, 100 Channels 1-6 set limits to 80 (very important) channels 2 and 4 INV (reverse) DR 100%, 70% Expo 20% If ESC does not arm, set lower limit for channel 1 to -100. That should give ...