openrcforums

I set up a twin motor pusher boat with differential steering via the motors. I have a switch set up so I can have the rudder or the ailerons do the differential steering. The problem is as an example. When I give left or right rudder and then start to increase the throttle both motors are spinning w...

I have an X10S Express. I never could get the LUA Script in my X10S Express to work to set the BEC voltage in the Neuron 60S. I get an error" attempt to compare number with nil". I did a voltage check on the BEC and it is set to 5 volts. The original eflite ESC was set to 5.46 so I think t...

Is there any kind of Gyro Screen for my X10S Express in OpenTx like for a Cortex gyro. My Futaba has a gyro screen where you can control the amount of gain in various channels for the gyro. If not would there be a way to control the gain for aileron, elevator, and rudder channels?

Any feedback from anyone who has done the ISRM 2.1.0 update?

Do you just have to set up one extra swtich to do the torque rolls. Right now I have a 3 position switch for Full Stabilization, Slight Gyro help, and no help at all. Can you explain how you set it up for the torque rolls. I guess there is a calibration once everything is installed in the airplane w...

So if I have extras but just want me to have control of them then I don't need to set up a complete student? If I just want them to have 4 main functions do I at least have to make a new model in the student?

Thanks

If you set up a second FRSky Taranis radio as a trainer does the model from the first have to be copied to the student like a Futaba. With Spektrum you don't need to copy the model to the student radio.

Any thoughts on wired vs wireless training.

Perfect. That is what I'm hoping.

tonnie78. That is what I mentioned in my original post. Using Companion to copy models from the X10S to the X7.

The file that you save when you back up your models.

Would it be possible to copy a file from an X10S in OpenTX Companion and upload it to a Tarranis QX7

I transposed the S + - with a silver felt pen to the top and transposed them backwards. Everything is fine now.

I purchased the GPS Sensor which I connected to my receiver 1-8 and it has telemetry turned one. One my X10S on the telemetry screen I am getting RSSI and Receiver Bat Voltage. When I do discover new sensors it doesn't come up with the GPS. The red light appears to be flashing quickly and I even tri...

I set up a separate channel for steering to follow the rudder. I need to have a separate trim on that channel which happens to be 13 so I can trim just the steering. I could use one of the knobs on the top for the steering but I don't know how to assign it. Figured it out. Had to assign a new input.

Where do you find stock switches for the X10S

I'm going to switch my electric float plane with 2 motors from my Futaba to my X10S. I have each motor set up on a seperate channel. I have a switch set up to couple the throttle on the motors to the rudder. This way on taxi out as I move the rudder to the right I will get more throttle on the left ...

Is it necessary to calibrate the sticks once in a while or if not when is it a good idea.

Has anyone set up their FatShark goggles to do head tracking on the X10S?

Fantastic I sure did. I didn't mean too so I need to be more careful.

Thanks

Rich

Seems like this screen should be defaulting to 100% for the endpoints. Someone said this might be microseconds instead of percentage but I can't find out where to default it back.


Sample screen

https://www.dropbox.com/s/uvrduu4yte97i ... s.jpg?dl=0