Search found 20 matches
- Tue Sep 22, 2020 11:37 pm
- Forum: FRSky Horus radio
- Topic: Differental Steering
- Replies: 2
- Views: 4669
Differental Steering
I set up a twin motor pusher boat with differential steering via the motors. I have a switch set up so I can have the rudder or the ailerons do the differential steering. The problem is as an example. When I give left or right rudder and then start to increase the throttle both motors are spinning w...
- Fri Jul 24, 2020 2:55 pm
- Forum: General Information & Rules
- Topic: Sbec Lua Script Not working
- Replies: 0
- Views: 6810
Sbec Lua Script Not working
I have an X10S Express. I never could get the LUA Script in my X10S Express to work to set the BEC voltage in the Neuron 60S. I get an error" attempt to compare number with nil". I did a voltage check on the BEC and it is set to 5 volts. The original eflite ESC was set to 5.46 so I think t...
- Thu May 21, 2020 3:49 pm
- Forum: openTx for FrSky radios
- Topic: Gyro Screen
- Replies: 0
- Views: 1848
Gyro Screen
Is there any kind of Gyro Screen for my X10S Express in OpenTx like for a Cortex gyro. My Futaba has a gyro screen where you can control the amount of gain in various channels for the gyro. If not would there be a way to control the gain for aileron, elevator, and rudder channels?
- Wed May 13, 2020 3:12 pm
- Forum: The FRSKY Forum
- Topic: ISRM 2.1.1
- Replies: 1
- Views: 3966
ISRM 2.1.1
Any feedback from anyone who has done the ISRM 2.1.0 update?
- Sat Jul 13, 2019 10:01 pm
- Forum: General help (FrSky Taranis radio)
- Topic: S6R receiver questions
- Replies: 1
- Views: 2087
S6R receiver questions
Do you just have to set up one extra swtich to do the torque rolls. Right now I have a 3 position switch for Full Stabilization, Slight Gyro help, and no help at all. Can you explain how you set it up for the torque rolls. I guess there is a calibration once everything is installed in the airplane w...
- Fri Jul 12, 2019 1:24 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Trainer
- Replies: 3
- Views: 3098
Re: Trainer
So if I have extras but just want me to have control of them then I don't need to set up a complete student? If I just want them to have 4 main functions do I at least have to make a new model in the student?
Thanks
Thanks
- Fri Jul 12, 2019 2:32 am
- Forum: General help (FrSky Taranis radio)
- Topic: Trainer
- Replies: 3
- Views: 3098
Trainer
If you set up a second FRSky Taranis radio as a trainer does the model from the first have to be copied to the student like a Futaba. With Spektrum you don't need to copy the model to the student radio.
Any thoughts on wired vs wireless training.
Any thoughts on wired vs wireless training.
- Wed Jul 10, 2019 9:23 pm
- Forum: openTx
- Topic: OpenTX X10S to Tarranis QX7
- Replies: 8
- Views: 6178
Re: OpenTX X10S to Tarranis QX7
Perfect. That is what I'm hoping.
- Wed Jul 10, 2019 7:00 pm
- Forum: openTx
- Topic: OpenTX X10S to Tarranis QX7
- Replies: 8
- Views: 6178
Re: OpenTX X10S to Tarranis QX7
tonnie78. That is what I mentioned in my original post. Using Companion to copy models from the X10S to the X7.
- Tue Jul 09, 2019 2:53 pm
- Forum: openTx
- Topic: OpenTX X10S to Tarranis QX7
- Replies: 8
- Views: 6178
Re: OpenTX X10S to Tarranis QX7
The file that you save when you back up your models.
- Tue Jul 09, 2019 1:00 am
- Forum: openTx
- Topic: OpenTX X10S to Tarranis QX7
- Replies: 8
- Views: 6178
OpenTX X10S to Tarranis QX7
Would it be possible to copy a file from an X10S in OpenTX Companion and upload it to a Tarranis QX7
- Mon Jun 03, 2019 1:35 pm
- Forum: FRSky Horus radio
- Topic: GPS Sensor
- Replies: 2
- Views: 4000
Re: GPS Sensor
I transposed the S + - with a silver felt pen to the top and transposed them backwards. Everything is fine now.
- Mon Jun 03, 2019 12:03 am
- Forum: FRSky Horus radio
- Topic: GPS Sensor
- Replies: 2
- Views: 4000
GPS Sensor
I purchased the GPS Sensor which I connected to my receiver 1-8 and it has telemetry turned one. One my X10S on the telemetry screen I am getting RSSI and Receiver Bat Voltage. When I do discover new sensors it doesn't come up with the GPS. The red light appears to be flashing quickly and I even tri...
- Sat Jun 01, 2019 4:50 am
- Forum: FRSky Horus radio
- Topic: How do I assign trim to my steering channel
- Replies: 1
- Views: 3957
How do I assign trim to my steering channel
I set up a separate channel for steering to follow the rudder. I need to have a separate trim on that channel which happens to be 13 so I can trim just the steering. I could use one of the knobs on the top for the steering but I don't know how to assign it. Figured it out. Had to assign a new input.
- Fri May 31, 2019 2:41 am
- Forum: FRSky Horus radio
- Topic: Trim Steps
- Replies: 0
- Views: 3314
Trim Steps
Where do you find stock switches for the X10S
- Tue May 28, 2019 1:31 pm
- Forum: openTx
- Topic: Variable Speed on Motors
- Replies: 1
- Views: 2134
Variable Speed on Motors
I'm going to switch my electric float plane with 2 motors from my Futaba to my X10S. I have each motor set up on a seperate channel. I have a switch set up to couple the throttle on the motors to the rudder. This way on taxi out as I move the rudder to the right I will get more throttle on the left ...
- Tue May 28, 2019 4:58 am
- Forum: FRSky Horus radio
- Topic: Stick Calibration X10S
- Replies: 1
- Views: 2924
Stick Calibration X10S
Is it necessary to calibrate the sticks once in a while or if not when is it a good idea.
- Sun May 26, 2019 2:01 pm
- Forum: FRSky Horus radio
- Topic: FatShark Head Tracking
- Replies: 0
- Views: 2760
FatShark Head Tracking
Has anyone set up their FatShark goggles to do head tracking on the X10S?
- Sat May 25, 2019 8:33 pm
- Forum: openTx
- Topic: output endpoints
- Replies: 2
- Views: 2458
Re: output endpoints
Fantastic I sure did. I didn't mean too so I need to be more careful.
Thanks
Rich
Thanks
Rich
- Sat May 25, 2019 8:26 pm
- Forum: openTx
- Topic: output endpoints
- Replies: 2
- Views: 2458
output endpoints
Seems like this screen should be defaulting to 100% for the endpoints. Someone said this might be microseconds instead of percentage but I can't find out where to default it back.
Sample screen
https://www.dropbox.com/s/uvrduu4yte97i ... s.jpg?dl=0
Sample screen
https://www.dropbox.com/s/uvrduu4yte97i ... s.jpg?dl=0