openrcforums

Mike,

able to make it work and play with different profile of training mode......Thanks

Joao,

yes.....maybe I can use one of my Frsky Receiver set it to PPM mode and make a Male Phone Jack......its a wireless Training ..... Thanks

9XR Pro can not active Trainer mode one some model...... I have this Turnigy 9XR Pro using ersky9X-r221 The Trainer mode works perfectly on SYMA X5C drone but When I switch to other model that use FRSKY receiver, the Trainer Mode do not work. but I can see all those 4 no. (Aileron, Elevator,Throttle...

Ok.....I was able to make maH reading on 9xr pro.......have already ordered the ACS758 hall effect current sensor. Been thinking of using LM324 , then just use 1 Op Amps for moving the 2.5 volts offset to ground Level.......then use another OP Amps for multipling the output from differential output ...

Mike.....I am from the Philippines Manila.......I tried to read the microSd card that cause the 9xr pro to hang up, but can not read the files anymore., I have tried 2 different card reader, still can not read the files. So I thinks is useless to try sending the Defective microSD card to you. Thanks...

jhsa wrote: ↑Fri Mar 22, 2019 10:55 pm This is what I built for my plane.. You can read about it here:

viewtopic.php?f=86&t=3420&start=30#p51498

João

Thats exactly My plan...........Thanks for the link.

Joao......wow.....Thats Great.......I am just beginning to migrate to 9xr pro.......I came from Hitec Aurora 9 radio, have sold all my Futaba Radio.......and shifted to Hitec Aurora 9 , this Aurora 9 is the most advantage Telemetry during their initial release.....Hitec has the most complete telemet...

Yes.....already downloaded the OpenXsenor.....thats my final plan. At the Moments my need is to measure the Amps-hour consumed by my Helicopter.....just need a simple current sensor. Been using EagleTree data logging to log current,temp, rpm .........its just record everything Onboard......need to c...

Thanks Mike and Joao......very fast respond.......will test it on monday.......

Was able to read 0 to 24.5 reading on 9xr pro ....... to simulate 0 to 24.5 amps....

Here is my actual video.....
https://youtu.be/-ylue_yy4Hk

Guys........plan to built a simple current sensor for 9xr pro......been thinking of getting a hall effect current sensor rated 50 Amps. The output of current sensor is just a very small......but can easily use OP Amps circuit to output 0 to 3 volts.......this corespond to 0 to 30 Amps......and conne...

Joao, I intentionally create separate thread this is about Data logging.....

Hoping others might respond on this about data logging.....

Guys, does 9XR Pro can automatically data log the Date and Time upon powering On, and also log upon powering OFF.... I read somewhere that 9XR pro can data log its Telemetry data in CVS format, then just download the CVS files of Excell for Graph.....but have not play with it yet. anyway, if I can m...

Guys......I got a Branded Sandisk 16 GB microSD card from my Raspberry Pie.........the MicroSD is perfectly working on Raspberry pie, I did not format it. Then I turn On the 9XR Pro.......it works for more than 80 minutes .......it Did not Hand Up, but the Irritating Beep did not activate..... I am ...

Ok......Now its working Perfectly......Thanks again.

See a fast result here......

Allen, Yes.......That I would do.....cause thats the easies thing to do.........this is the first thing I will do. If it hang up again. Then will have to download all the file. My Turnigy still On since this morning ..... its already passed 1pm.....still counting.....its 241 minutes ..... 100 + 100 ...

The Trim button is not working very well......assuming all trim is at the center......to center all the trim, I just press the trim button u til I feel the vibrate. Now, if I press the Right trim button once, then press the left trim button once its should go back to center and feel it vibrate, this...

Joao......Yes.....Thanks..........still running at 158 minutes.........

Will purchase any Branded microSD card.

Mike, have not yet tested on the test version firmware...........but look like have found the cause of hang up. This time I removed the Micro SD card as suggest by Joao, this Micro SD card is just a Cheap No Brand just got it free from cheap camera drone.........I feel this might be causing the Hang...

Guys......yes.....have perform a full clean up on Ribbon Cable going to LCD display......and also all the did perform Unplug , Spray all male and female connection with contact cleaner before plugging the connector.........even all the pin of St32 main controller have clean it up. This after the 9xr...

This is the reason there is No Audio when the LCD Display is Freeze......

It could be a software or hardware problem.........

Hope somebody can just Turn On their Turnigy 9XR Pro for more than 2 hour and see the result........

Joao, Thanks for the link, I was able to download the 9xr pro schematic diagram. Have notice there is a common I/O pin from the main controller that control the LCD display and Audio Amplifier .......the LCD CS and LCD WR , (this is LCD chip select and write ) this 2 pin is connected thru a resistor...

Yes.......The Audio feedback beep tone is missing.......

I am still looking for the Schematic Diagram for 9XR Pro......

Guys.....Turnigy 9XR PRO LCD display freeze intermittently.........some times it hang after 18 minutes, sometimes 25 minutes, or 80 minutes. When the LCD display freeze up.......the gimbal stick can control the servo, Trim button also working, I can feel the vibrating motor vibrate on center trim. h...