openrcforums

http://openrcforums.com/wiki/index.php/ ... Voice)_Mod
this voice mod did not require soldering so fine wires such as FrSky mod. And works great

one crazy solution for NI0X:
Timer2 = TRNm
CH16 = CS3 100 DelayDown 3
CS3 = |d|>=x Trm2 00:03

everything is just fun
Gabriel

https://code.google.com/p/open9x/downloads/list
English manual in this case is up to date.
| d |
d is delta
| | is absolute value.

eg: |d| >=x P1 10 means absolute change of P1 value by 10. (if P1 changed +10 or -10 from last value)

Gabriel

Chris, I try to reproduce, but i can't.
is this setup what are you doing?
Mix:
CH2 100% Thr Slow up 5
replace -125% MAX SwitchTHR

Limits: CH2 INV

Gabriel

please use companion9x to download latest FW with your custom selected options: https://code.google.com/p/companion9x/downloads/list

or you can use direct link with few basic set of options:
https://code.google.com/p/open9x/wiki/Binaries

Gabriel

all issues are solved in svn.
please wait for next release of c9x and o9x.

Gabriel

Ok, now I understood. Case 3 is wrong template in open9x.
We will change it according with companion Heli template.

Gabriel

Hi propnut,
we identify that your issue 1 and 2 with collective resides in shift of CH11 to Cells value between companion and open9x.
but i can't simulate issue 3. Are you tried this with last open9x on your TX?

Gabriel

Yes, after loosing telemetry receiver signal, on Telemetry GPS screen there will be last known GPS position! This is applicable for FrSky telemetry option. I assume same for other (NMEA, JETI, ....).

Gabriel.

Analog test 5/6 was corrected in svn. It was only cosmetic shift

Gabriel

yes, 100% = 512us

Gabriel

Analog test 5/6 seems to small bug. it is reproducible also here.
Gabriel

Hy, are there errors r1855 and r1947 with Stock PCB heli templates ppmca ppmus gvars symlimits autoswitch pgbar same since 1726 Limits 7/11 Chanels normal is 0.0 -100 100 now its 0.0 -512 to 512 is this correkt? Main screen alle channels now have PPM signals 1500 -908 to 2012 instead of standard -1...

I tested it on stock board. Export/Import transfers all values from o9x to c9x and back to o9x. Everything looks good. But still be careful. Before flight need to be tested all used combinations!
Gabriel

if I am not wrong, You need to make cyclic timer for playing voice messages.
what about this:
CH16 (+100%)CSC Delay(u1:d1) Slow(u1:d1)
CSC CH16 < 0
FSW1 mCSC PlayTrack 256
the repeating time can be from 2 to 45 seconds.

Gabriel

I understand when we can improve some features that users need often to use.
But how many times was your T9x stolen? And will help oinf?
I think no.
Gabriel

"check for updates" button do it, but "download" button didn't
Gabriel
Edit: linux

no no Bertrand. i think that the model (or mixer) based crosstrim is must have feature.
i just try to find how it will work with insantTrim. although I've never used instantTrim.
Gabriel

ok. least significant looks cross trimming on mixes. what about flash if leaving only OFF/ON for mix trims?
Gabriel

If I am righr, then Model Menu need setup for assigning TrimA,E,R,T to none or some stick (OFF, Ail, Ele, Rud, Thr) based on this, insantTrim stores corresponding stick values to TrimA,E,R,T Mix menu can still have Trim options with choices OFF, ON, TrimA,E,R,T. And also using Trims like sources of ...

But the biggest problem is that the glorious instant trim function doesn't work with cross trims. If I set up cross trims and trigger an instant trim, the throttle position is used as elevator trim, the rudder position is used as aileron trim and the aileron position is used as rudder trim. Not so ...

it is already implemented on model mixes pages. (not in global or radio setup) while you are editing mix, you can select source "Ail" and its trim "Rud". "Trims in mixes can be selected from OFF, ON, Rud, Ele, Thr, Ail - it's possible to cross trims between sticks" it i...

nosplash will help too.
gabriel

now added also C1-3

Open9x puts list items that are not available with the current compilation options between brackets. Good to know, I would NEVER have guessed that. Are details to things like this disclosed somewhere? I mean, without an in-depth source code review by the user? - Thomas here: http://code.google.com/...

I had same turning on behavior after longer power off.
And it looks that from r1387 it was solved. My tx now play first sound (czech) each time.
Please wait to next official release.

Gabriel

9xforums wiki updated.
http://openrcforums.com/wiki/index.php/ ... ETUP_model

center beep can't be done this way, and i think that for S-Warning this is less Flash solution and also it is faster.

set the TX switches to desired position and then in SETUP model screen on S-Warning check box press [MENU Long]
http://code.google.com/p/open9x/wiki/Open9xFeatures

maybe 9xforums wiki need to be updated
Gabriel

Czech voices are "without gaps" on my stock board.
PCM U8 (araw)
16kHz
8 bits
mono
BTW EN voices downloaded through Companion9x have same codec used.

maybe you use the microSD module version? somewhere on forum is discussion about gaps with it.

Gabriel