openrcforums

Hi, Would anyone have a copy of the opentx-taranisplus-en.bin file for opentx 2.1.9 that they could upload to 'Filebin' or somewhere for me? I got the companion for 2.1.9 off open-tx.org but the bin file will not download, it says "unknown server error, try later" and internet searches hav...

Thanks for all that.
I calibrated the sticks but was still getting warning and noticed the position reading was -98.1 and had to push it down quite firmly to get it to -100 so recalibrated without pushing the stick right to the bottom and that has fixed it.
Firmware version is er9x-r820

Tried flashing the er9x-128 file and it seemed to work but was a bit worried when it finished as Tx was showing 'eeprom error' but that has not come back. On switch on it always shows throttle and alarms warning even though throttle is at zero and alarms are set. Came across this chip type issue as ...

I haven't managed to flash anything to the radio yet, I think I have saved a copy of the firmware from the Tx. The eePe program appears to make the temp.hex file, I have also been trying the opentx, companion flashing software and discovered it also creates a temp.hex file. I got a 'er9x-128.hex' fi...

Hi, Got a used Turnigy 9XR recently and was trying to flash it with Opentx but had problems (post in that section of forum) so thought I would try er9x and am getting a message saying "Error loading file D:/Temp/Temp/temp.hex: File may be corrupted, old or from a different system. You might nee...

Been working away and just got back to this. I am now getting a message saying: "Invalid EEPROM file D:/Temp/Temp/7812-temp.hex" , "Possible causes for this: -Eeprom size is invalid -Eeprom file system is invalid." I did wonder why it is using '/' in the path instead of '\'. Curr...

Hi, New to this subject, got a used Turnigy 9xr with the 128 chip recently and after doing some reading and getting a 'USBasp' I tried to update the software on it and found opentx 2.2.1 would not load on it (board error) so tried opentx 2.1.9 and it is saying 'new firmware not compatible with insta...